[Sat May 11 03:38:26 2013] Detection parameters:
  Position = (287.8, 283.0) = 12 38 18.25 -38 42 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 17.6
  Background counts = 17.8
  Rate = 0.007 +/- 0.001

[Sat May 11 03:38:26 2013] Off-axis axis estimate = 1.36'
[Sat May 11 04:25:34 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:25:34 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Sat May 11 04:25:34 2013] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.823
[Sat May 11 04:25:34 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.11"
[Sat May 11 04:52:28 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6.ximg exists
[Sat May 11 04:52:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6.csv
[Sat May 11 04:52:28 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat May 11 04:52:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6.csv
[Sat May 11 04:52:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 04:52:29 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat May 11 04:52:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 11 04:52:29 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat May 11 04:52:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat May 11 04:52:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:19:44 2013] Source 6 is offset by -5.707067 and 5.515631 pixels which is larger than
2 X fitted extent = 1.949756 x 6.536230, not incorporating fit results
[Sat May 11 05:19:44 2013] Vigneting correction estimate = 1.000000
[Sat May 11 05:19:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 05:19:44 2013] Assessing source extent using major
[Sat May 11 05:19:44 2013] Source does appear to be extended
[Sat May 11 05:19:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 05:56:16 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Sat May 11 05:56:16 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Sat May 11 05:56:16 2013] source mask rpix=1.6, npix_max = 18, mask sum = 15, frac = 0.823
[Sat May 11 05:56:16 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.11"
[Sat May 11 06:23:26 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6.ximg exists
[Sat May 11 06:23:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6.csv
[Sat May 11 06:23:26 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat May 11 06:23:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6.csv
[Sat May 11 06:23:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 06:23:27 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat May 11 06:23:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 11 06:23:27 2013] fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May 11 06:23:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 11 06:23:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 06:35:05 2013] Source 6 is offset by -5.707067 and 5.515631 pixels which is larger than
2 X fitted extent = 6.536230 x 2.208009, not incorporating fit results
[Sat May 11 06:35:05 2013] Vigneting correction estimate = 1.000000
[Sat May 11 06:35:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 06:35:05 2013] Assessing source extent using major
[Sat May 11 06:35:05 2013] Source does appear to be extended
[Sat May 11 06:35:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:07:23 2013] XMMSAS src. selection expression = ellipse(24992.637146, 24570.707855, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 07:07:23 2013] Writing source region out to fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_src.reg
[Sat May 11 07:07:23 2013] Extracting stamp from image fullrun_mos1_xmm0673140501_pi300-10000_cl_sm2.00.img.gz, (250, 245) - (325, 320)
[Sat May 11 07:07:23 2013] XMMSAS bgd. selection expression = annulus(24992.637146, 24570.707855, 1087.500000, 2175.000000, X, Y) && !ellipse(25474.780200, 23881.558400, 1287.919237, 1202.416835, 357.439940, X, Y) && !ellipse(25725.130524, 24762.233704, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 07:07:23 2013] Writing fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6.gif
[Sat May 11 07:11:46 2013] Mean detx,y = (-80.80, -147.60) 
[Sat May 11 07:11:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 07:12:06 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 07:12:06 2013] Setting source spectrum file to fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat May 11 07:12:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat May 11 07:20:23 2013] Not generating rmf since there are only 93 counts
[Sat May 11 07:20:23 2013] rmf not generated due to insufficient counts
[Sat May 11 07:37:21 2013] Updating aperture counts using extracted products
[Sat May 11 07:37:21 2013] Total counts from fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2560.00
[Sat May 11 07:37:21 2013] Total counts from fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 89.00
[Sat May 11 07:37:21 2013] Got source and background scale factors 1184428.000000, 402.000000
[Sat May 11 07:37:21 2013] User source parameters:
  Position = (287.8, 283.0) = 12 38 18.25 -38 42 6.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -259664.1 +/- 51.6
  Background aperture counts = 262224.1
  Rate = -2e+01 +/- 0.003

[Sat May 11 07:37:21 2013] Updating counts from extracted products
[Sat May 11 07:37:21 2013] Set source signif. to -259664.11/512.08 = -507.08
[Sat May 11 07:37:21 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 07:37:21 2013] Using photon index=1.80, rate=-16, arf fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6.arf
[Sat May 11 07:37:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 07:37:21 2013] Updated flux is not positive, keeping original flux
[Sat May 11 07:37:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 07:37:25 2013] xmm0673140501/analysis//spectral/fullrun_mos1_xmm0673140501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete