[Wed May 22 10:00:51 2013] Detection parameters:
  Position = (158.4, 342.2) = 7 59 38.39 16 18 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.2 +/- 7.5
  Background counts = 6.2
  Rate = 0.004 +/- 0.001

[Wed May 22 10:00:52 2013] Off-axis axis estimate = 10.64'
[Wed May 22 10:02:41 2013] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Wed May 22 10:02:41 2013] Initial guess for spatial extent in simple fitting = 11.75"
[Wed May 22 10:02:41 2013] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.025
[Wed May 22 10:02:41 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.75"
[Wed May 22 10:30:17 2013] fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 22 10:30:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4.csv
[Wed May 22 10:30:17 2013] fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 22 10:30:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4.csv
[Wed May 22 10:30:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 10:30:17 2013] fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 22 10:30:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 10:30:17 2013] fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 22 10:30:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 10:30:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 11:02:38 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.507259 pixels away
[Wed May 22 11:02:38 2013] Source 4 is offset by 7.979435 and 2.617581 pixels which is larger than
2 X fitted extent = 1.323531 x 1.323531, not incorporating fit results
[Wed May 22 11:02:38 2013] Vigneting correction estimate = 1.000000
[Wed May 22 11:02:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 11:02:38 2013] Assessing source extent using major
[Wed May 22 11:02:38 2013] Source does appear to be extended
[Wed May 22 11:02:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 11:02:38 2013] Deleting source due to low Poisson probability 0.8