[Thu Jun 13 01:07:10 2013] Detection parameters:
  Position = (243.3, 386.3) = 16 34 59.82 40 26 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.3 +/- 9.6
  Background counts = 14.7
  Rate = 0.002 +/- 0.0004

[Thu Jun 13 01:07:11 2013] Off-axis axis estimate = 7.52'
[Thu Jun 13 02:41:40 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 02:41:40 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Jun 13 02:41:40 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Thu Jun 13 02:41:40 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 10.19"
[Thu Jun 13 03:27:05 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 13 03:27:05 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 13 03:27:05 2013] Fit fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_src22 appears to have run properly
[Thu Jun 13 03:27:05 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 13 03:27:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun 13 03:27:05 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 13 03:27:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu Jun 13 03:27:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673100101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 04:09:33 2013] Warning, spatial fit 22 centroid is now closest to src. 19
[Thu Jun 13 04:09:33 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 04:09:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 04:09:33 2013] Assessing source extent using major
[Thu Jun 13 04:09:33 2013] Source does appear to be extended
[Thu Jun 13 04:09:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 04:09:33 2013] Source is confused with source 19
[Thu Jun 13 05:27:23 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 05:27:23 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Jun 13 05:27:23 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Thu Jun 13 05:27:23 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 10.19"
[Thu Jun 13 06:06:32 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jun 13 06:06:32 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jun 13 06:06:32 2013] Fit fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_src22 appears to have run properly
[Thu Jun 13 06:06:32 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jun 13 06:06:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Jun 13 06:06:32 2013] fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jun 13 06:06:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Jun 13 06:06:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673100101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 06:44:35 2013] Spatial fit model total counts = 315.120000, observed total counts = 285.000000
[Thu Jun 13 06:44:35 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 06:44:35 2013] Warning, spatial fit 22 centroid is now closest to src. 19
[Thu Jun 13 06:44:35 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 06:44:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 06:44:35 2013] Assessing source extent using major
[Thu Jun 13 06:44:35 2013] Source does appear to be extended
[Thu Jun 13 06:44:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 08:01:55 2013] XMMSAS src. selection expression = ellipse(21118.083862, 33560.498993, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 08:01:55 2013] Writing source region out to fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 13 08:01:55 2013] Extracting stamp from image fullrun_mos1_xmm0673100101_pi300-10000_cl_sm2.00.img.gz, (206, 349) - (281, 424)
[Thu Jun 13 08:01:55 2013] XMMSAS bgd. selection expression = annulus(21118.083862, 33560.498993, 1087.500000, 2175.000000, X, Y) && !ellipse(21689.920200, 31934.135200, 324.762409, 324.762409, 0.000000, X, Y) && !ellipse(20677.938000, 33275.148000, 1630.280047, 378.932811, 337.012700, X, Y)
[Thu Jun 13 08:01:55 2013] Writing fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18.gif
[Thu Jun 13 08:07:49 2013] Mean detx,y = (7104.72, -4552.09) 
[Thu Jun 13 08:07:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 08:08:09 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 08:08:10 2013] Setting source spectrum file to fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 13 08:08:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 13 08:19:15 2013] Not generating rmf since there are only 40 counts
[Thu Jun 13 08:19:15 2013] rmf not generated due to insufficient counts
[Thu Jun 13 08:36:16 2013] Updating aperture counts using extracted products
[Thu Jun 13 08:36:16 2013] Total counts from fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 156.00
[Thu Jun 13 08:36:16 2013] Total counts from fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 727.00
[Thu Jun 13 08:36:16 2013] Got source and background scale factors 1202300.000000, 9477406.000000
[Thu Jun 13 08:36:16 2013] User source parameters:
  Position = (243.3, 386.3) = 16 34 59.82 40 26 38.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 63.8 +/- 13.5
  Background aperture counts = 92.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 08:36:16 2013] Updating counts from extracted products
[Thu Jun 13 08:36:16 2013] Set source signif. to 63.77/9.60 = 6.64
[Thu Jun 13 08:36:17 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 08:36:17 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18.arf
[Thu Jun 13 08:36:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 08:36:17 2013] Updating source flux to 2.4e-14
[Thu Jun 13 08:36:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 08:36:25 2013] xmm0673100101/analysis//spectral/fullrun_mos1_xmm0673100101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete