[Thu Jun 20 01:22:06 2013] Detection parameters:
  Position = (236.3, 485.8) = 3 21 45.55 41 23 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.2 +/- 14.6
  Background counts = 54.9
  Rate = 0.002 +/- 0.0005

[Thu Jun 20 01:22:07 2013] Off-axis axis estimate = 14.32'
[Thu Jun 20 02:27:33 2013] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 02:27:33 2013] Initial guess for spatial extent in simple fitting = 13.59"
[Thu Jun 20 02:27:33 2013] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.876
[Thu Jun 20 02:27:33 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 13.59"
[Thu Jun 20 05:12:45 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 20 05:12:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 05:12:45 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 20 05:12:45 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21.csv
[Thu Jun 20 05:12:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:12:47 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 20 05:12:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 05:12:47 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 20 05:12:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 20 05:12:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 05:58:47 2013] Warning, spatial fit 11 centroid is now closest to src. 14
[Thu Jun 20 05:58:47 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.783518 pixels away
[Thu Jun 20 05:58:47 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:58:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:58:47 2013] Assessing source extent using major
[Thu Jun 20 05:58:47 2013] Source does appear to be extended
[Thu Jun 20 05:58:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 06:54:37 2013] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:54:37 2013] Initial guess for spatial extent in simple fitting = 13.59"
[Thu Jun 20 06:54:37 2013] source mask rpix=3.1, npix_max = 52, mask sum = 46, frac = 0.876
[Thu Jun 20 06:54:37 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 13.59"
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21.csv
[Thu Jun 20 11:54:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 11:54:09 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu Jun 20 11:54:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 20 11:54:09 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu Jun 20 11:54:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu Jun 20 11:54:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 12:43:22 2013] Warning, spatial fit 17 centroid is now closest to src. 15
[Thu Jun 20 12:43:22 2013] Warning, spatial fit 20 centroid is now closest to src. 19
[Thu Jun 20 12:43:22 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.387608 pixels away
[Thu Jun 20 12:43:22 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 12:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 12:43:22 2013] Assessing source extent using major
[Thu Jun 20 12:43:22 2013] Source does appear to be extended
[Thu Jun 20 12:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 13:02:33 2013] XMMSAS src. selection expression = ellipse(20507.451019, 42220.256714, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 13:02:33 2013] Writing source region out to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 20 13:02:33 2013] Extracting stamp from image fullrun_mos1_xmm0673020401_pi300-10000_cl_sm2.00.img.gz, (199, 448) - (274, 523)
[Thu Jun 20 13:02:33 2013] XMMSAS bgd. selection expression = annulus(20507.451019, 42220.256714, 1087.500000, 2175.000000, X, Y) && !ellipse(22104.822845, 42534.766174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.758636, 42023.147339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21393.334732, 42169.728851, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 20 13:02:33 2013] Writing fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5.gif
[Thu Jun 20 13:10:51 2013] Mean detx,y = (11855.04, -12014.01) 
[Thu Jun 20 13:10:52 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 13:11:08 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 13:11:08 2013] Setting source spectrum file to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 20 13:11:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 20 13:32:23 2013] Not generating rmf since there are only 68 counts
[Thu Jun 20 13:32:23 2013] rmf not generated due to insufficient counts
[Thu Jun 20 13:37:21 2013] Updating aperture counts using extracted products
[Thu Jun 20 13:37:21 2013] Total counts from fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 168.00
[Thu Jun 20 13:37:21 2013] Total counts from fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 833.00
[Thu Jun 20 13:37:22 2013] Got source and background scale factors 918110.000000, 3999463.000000
[Thu Jun 20 13:37:22 2013] User source parameters:
  Position = (236.3, 485.8) = 3 21 45.55 41 23 31.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -23.2 +/- 14.0
  Background aperture counts = 191.2
  Rate = -0.001 +/- 0.0006

[Thu Jun 20 13:37:22 2013] Updating counts from extracted products
[Thu Jun 20 13:37:22 2013] Set source signif. to -23.22/13.83 = -1.68
[Thu Jun 20 13:37:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 13:37:22 2013] Using photon index=1.80, rate=-0.000953, arf fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5.arf
[Thu Jun 20 13:37:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 13:37:22 2013] Updated flux is not positive, keeping original flux
[Thu Jun 20 13:37:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 13:37:28 2013] xmm0673020401/analysis//spectral/fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete