[Thu Jun 20 01:22:06 2013] Detection parameters:
  Position = (422.4, 469.2) = 3 20 33.60 41 22 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.8 +/- 23.0
  Background counts = 92.1
  Rate = 0.005 +/- 0.0007

[Thu Jun 20 01:22:07 2013] Off-axis axis estimate = 15.30'
[Thu Jun 20 02:27:33 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 02:27:33 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Jun 20 02:27:33 2013] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.949
[Thu Jun 20 02:27:33 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 14.08"
[Thu Jun 20 05:12:44 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 20 05:12:44 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 20 05:12:44 2013] Fit fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Jun 20 05:12:46 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 20 05:12:46 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 20 05:12:46 2013] Fit fullrun_mos1_xmm0673020401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 20 05:58:47 2013] Warning, spatial fit 3 centroid is now closest to src. 13
[Thu Jun 20 05:58:47 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.706581 pixels away
[Thu Jun 20 05:58:47 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 05:58:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 05:58:47 2013] Assessing source extent using major
[Thu Jun 20 05:58:47 2013] Source does appear to be extended
[Thu Jun 20 05:58:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 05:58:47 2013] Source is confused with source 13
[Thu Jun 20 06:54:37 2013] Using EEF radius (= 14.08 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 06:54:37 2013] Initial guess for spatial extent in simple fitting = 14.08"
[Thu Jun 20 06:54:37 2013] source mask rpix=3.2, npix_max = 55, mask sum = 53, frac = 0.949
[Thu Jun 20 06:54:37 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 14.08"
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3.csv
[Thu Jun 20 11:54:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 20 11:54:08 2013] fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 20 11:54:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun 20 11:54:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673020401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 12:43:22 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 12.119288 pixels away
[Thu Jun 20 12:43:22 2013] Source 2 is offset by -0.981137 and 5.651395 pixels which is larger than
2 X fitted extent = 1.614855 x 1.614855, not incorporating fit results
[Thu Jun 20 12:43:22 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 37.656519 pixels away
[Thu Jun 20 12:43:22 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 12:43:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 12:43:22 2013] Assessing source extent using major
[Thu Jun 20 12:43:22 2013] Source does appear to be extended
[Thu Jun 20 12:43:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 13:02:32 2013] XMMSAS src. selection expression = ellipse(36703.581085, 40774.731323, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 20 13:02:32 2013] Writing source region out to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 20 13:02:32 2013] Extracting stamp from image fullrun_mos1_xmm0673020401_pi300-10000_cl_sm2.00.img.gz, (385, 432) - (460, 507)
[Thu Jun 20 13:02:32 2013] XMMSAS bgd. selection expression = annulus(36703.581085, 40774.731323, 1087.500000, 2175.000000, X, Y) && !ellipse(36215.257477, 41266.939240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.092000, 42535.048000, 2251.728065, 1254.656036, 211.332000, X, Y) && !ellipse(35811.400970, 40955.374207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.076000, 41865.572000, 2247.880065, 1241.488036, 212.871000, X, Y) && !ellipse(35701.119019, 41367.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38623.745000, 39039.928000, 2262.560065, 2262.560065, 0.000000, X, Y) && !ellipse(37256.294000, 40394.572000, 2252.736065, 1607.936046, 34.984400, X, Y) && !ellipse(33935.909515, 42220.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33354.332000, 42669.650000, 2239.984064, 798.975223, 25.638100, X, Y)
[Thu Jun 20 13:02:32 2013] Writing fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2.gif
[Thu Jun 20 13:03:47 2013] Mean detx,y = (16241.53, 3519.04) 
[Thu Jun 20 13:03:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 20 13:04:00 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 20 13:04:00 2013] Setting source spectrum file to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 20 13:04:00 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 20 13:11:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 20 13:11:45 2013] rmf not generated due to insufficient counts
[Thu Jun 20 13:37:19 2013] Updating aperture counts using extracted products
[Thu Jun 20 13:37:19 2013] Total counts from fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 547.00
[Thu Jun 20 13:37:19 2013] Total counts from fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 191.00
[Thu Jun 20 13:37:19 2013] Got source and background scale factors 1196702.000000, 483995.000000
[Thu Jun 20 13:37:19 2013] User source parameters:
  Position = (422.4, 469.2) = 3 20 33.60 41 22 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.7 +/- 24.4
  Background aperture counts = 472.3
  Rate = 0.003 +/- 0.001

[Thu Jun 20 13:37:19 2013] Updating counts from extracted products
[Thu Jun 20 13:37:19 2013] Set source signif. to 74.74/21.73 = 3.44
[Thu Jun 20 13:37:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 20 13:37:22 2013] Using photon index=1.80, rate=0.00307, arf fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2.arf
[Thu Jun 20 13:37:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 20 13:37:22 2013] Updating source flux to 1.1e-13
[Thu Jun 20 13:37:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 20 13:37:28 2013] xmm0673020401/analysis//spectral/fullrun_mos1_xmm0673020401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete