[Sat Jun 22 22:43:56 2013] Detection parameters:
  Position = (536.9, 407.0) = 23 27 41.86 -0 11 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 19.9
  Background counts = 53.5
  Rate = 0.0008 +/- 0.0002

[Sat Jun 22 22:43:57 2013] Off-axis axis estimate = 18.99'
[Sat Jun 22 23:47:19 2013] Using EEF radius (= 15.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 23:47:19 2013] Initial guess for spatial extent in simple fitting = 15.93"
[Sat Jun 22 23:47:19 2013] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.924
[Sat Jun 22 23:47:19 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 15.93"
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17.csv
[Sun Jun 23 03:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sun Jun 23 03:44:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:20:58 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 20.122783 pixels away
[Sun Jun 23 08:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 08:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 08:20:58 2013] Assessing source extent using major
[Sun Jun 23 08:20:58 2013] Source does appear to be extended
[Sun Jun 23 08:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 09:19:39 2013] Using EEF radius (= 15.93 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:19:39 2013] Initial guess for spatial extent in simple fitting = 15.93"
[Sun Jun 23 09:19:39 2013] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.924
[Sun Jun 23 09:19:39 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 15.93"
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16.csv
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16.csv
[Sun Jun 23 12:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 23 12:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 16:35:38 2013] Warning, spatial fit 16 centroid is now closest to src. 44
[Sun Jun 23 16:35:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 16:35:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 16:35:38 2013] Assessing source extent using major
[Sun Jun 23 16:35:38 2013] Source does appear to be extended
[Sun Jun 23 16:35:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 18:00:21 2013] XMMSAS src. selection expression = ellipse(46659.354187, 35358.073303, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 18:00:21 2013] Writing source region out to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun 23 18:00:21 2013] Extracting stamp from image fullrun_mos1_xmm0673002301_pi300-10000_cl_sm2.00.img.gz, (499, 369) - (574, 444)
[Sun Jun 23 18:00:21 2013] XMMSAS bgd. selection expression = annulus(46659.354187, 35358.073303, 1087.500000, 2175.000000, X, Y) && !ellipse(46034.779785, 35966.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44612.438110, 36665.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44295.440887, 37364.739136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45300.972168, 35368.337646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44898.432556, 37265.645477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45863.493225, 35109.753723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45648.510193, 38330.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44623.164429, 37884.076141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43910.074000, 38558.046000, 1067.808031, 1067.808031, 0.000000, X, Y) && !ellipse(45541.783325, 37088.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(46871.368896, 34712.444519, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 18:00:21 2013] Writing fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43.gif
[Sun Jun 23 18:07:02 2013] Mean detx,y = (8292.76, 10530.59) 
[Sun Jun 23 18:07:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:07:16 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:07:16 2013] Setting source spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jun 23 18:07:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jun 23 18:24:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 18:24:29 2013] rmf not generated due to insufficient counts
[Sun Jun 23 19:16:13 2013] Updating aperture counts using extracted products
[Sun Jun 23 19:16:13 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 29.00
[Sun Jun 23 19:16:13 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_bgd.pi.gz = 125.00
[Sun Jun 23 19:16:13 2013] Got source and background scale factors 1682.000000, 4252.000000
[Sun Jun 23 19:16:13 2013] User source parameters:
  Position = (536.9, 407.0) = 23 27 41.86 -0 11 11.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -20.4 +/- 6.5
  Background aperture counts = 49.4
  Rate = -0.0002 +/- 6e-05

[Sun Jun 23 19:16:13 2013] Updating counts from extracted products
[Sun Jun 23 19:16:13 2013] Set source signif. to -20.45/7.03 = -2.91
[Sun Jun 23 19:16:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 19:16:21 2013] Using photon index=1.80, rate=-0.000185, arf fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43.arf
[Sun Jun 23 19:16:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 19:16:21 2013] Getting flux using calc_pl_flux failed
[Sun Jun 23 19:16:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 19:16:42 2013] xmm0673002301/analysis//spectral/fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete