[Sat Jun 22 22:43:55 2013] Detection parameters:
  Position = (505.7, 441.0) = 23 27 50.91 -0 8 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.8 +/- 16.7
  Background counts = 34.6
  Rate = 0.0007 +/- 0.0001

[Sat Jun 22 22:43:57 2013] Off-axis axis estimate = 18.24'
[Sat Jun 22 23:47:19 2013] Using EEF radius (= 15.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 23:47:19 2013] Initial guess for spatial extent in simple fitting = 15.55"
[Sat Jun 22 23:47:19 2013] source mask rpix=3.6, npix_max = 66, mask sum = 58, frac = 0.874
[Sat Jun 22 23:47:19 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 15.55"
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20.csv
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20.csv
[Sun Jun 23 03:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Jun 23 03:44:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:20:58 2013] Source 38 is offset by 3.896084 and -3.242889 pixels which is larger than
2 X fitted extent = 1.874166 x 1.874166, not incorporating fit results
[Sun Jun 23 08:20:58 2013] Warning, spatial fit 20 centroid is now closest to src. 34
[Sun Jun 23 08:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 08:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 08:20:58 2013] Assessing source extent using major
[Sun Jun 23 08:20:58 2013] Source does appear to be extended
[Sun Jun 23 08:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 08:20:58 2013] Source is confused with source 5
[Sun Jun 23 09:19:39 2013] Using EEF radius (= 15.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:19:39 2013] Initial guess for spatial extent in simple fitting = 15.55"
[Sun Jun 23 09:19:39 2013] source mask rpix=3.6, npix_max = 66, mask sum = 58, frac = 0.874
[Sun Jun 23 09:19:39 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 15.55"
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19.csv
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19.csv
[Sun Jun 23 12:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 23 12:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 16:35:38 2013] Source 38 is offset by 3.948383 and -2.496889 pixels which is larger than
2 X fitted extent = 1.798175 x 1.798175, not incorporating fit results
[Sun Jun 23 16:35:38 2013] Spatial fit model total counts = 59.403500, observed total counts = 56.000000
[Sun Jun 23 16:35:38 2013] Offset between fit and detection position for source 38 = 2.775577 pixels
[Sun Jun 23 16:35:38 2013] Warning, changing simple spatial fit ID from 19 to 18
[Sun Jun 23 16:35:38 2013] 57.705600 total counts/ 43.597000 bgd. counts: snr = 2.136759
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.775577 pixels
  Position = (505.3, 443.8) = 23 27 51.03 -0 8 32.7
  Extent = 13.3 (5.9-31.4)", rotation angle = 0
  Source counts = 14.1 +/- 7.6
  Background counts = 43.6
  Rate = 0.0001 +/- 7e-05
[Sun Jun 23 16:35:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 16:35:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 16:35:38 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 16:35:38 2013] Source does appear to be extended
[Sun Jun 23 16:35:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 18:00:21 2013] XMMSAS src. selection expression = ellipse(43910.074000, 38558.046000, 800.856023, 800.856023, 0.000000, X, Y)
[Sun Jun 23 18:00:21 2013] Writing source region out to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_src.reg
[Sun Jun 23 18:00:21 2013] Extracting stamp from image fullrun_mos1_xmm0673002301_pi300-10000_cl_sm2.00.img.gz, (459, 398) - (551, 490)
[Sun Jun 23 18:00:21 2013] XMMSAS bgd. selection expression = annulus(43910.074000, 38558.046000, 1334.760038, 2669.520077, X, Y) && !ellipse(46034.779785, 35966.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44166.085205, 38673.445557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44612.438110, 36665.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44346.879425, 39527.932220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44295.440887, 37364.739136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45300.972168, 35368.337646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43364.813293, 41528.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44898.432556, 37265.645477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45863.493225, 35109.753723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45648.510193, 38330.946777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(46659.354187, 35358.073303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44585.516113, 41268.659698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43771.433685, 40752.803436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44623.164429, 37884.076141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45541.783325, 37088.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43968.434204, 41978.885345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44127.433289, 41267.523346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43341.653473, 40672.332153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43732.702118, 39125.026215, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 18:00:21 2013] Writing fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38.gif
[Sun Jun 23 18:08:37 2013] Mean detx,y = (8608.22, 12730.38) 
[Sun Jun 23 18:08:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:08:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:08:52 2013] Setting source spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sun Jun 23 18:08:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sun Jun 23 18:24:52 2013] Not generating rmf since there are only 14 counts
[Sun Jun 23 18:24:52 2013] rmf not generated due to insufficient counts
[Sun Jun 23 19:16:14 2013] Updating aperture counts using extracted products
[Sun Jun 23 19:16:14 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 32.00
[Sun Jun 23 19:16:14 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_bgd.pi.gz = 29.00
[Sun Jun 23 19:16:15 2013] Got source and background scale factors 2518.000000, 4034.000000
[Sun Jun 23 19:16:15 2013] User source parameters:
  Position = (505.3, 443.8) = 23 27 51.03 -0 8 32.7
  Extent = 13.3 (5.9-31.4)", rotation angle = 0
  Source aperture counts = 13.9 +/- 6.7
  Background aperture counts = 18.1
  Rate = 0.0001 +/- 6e-05

[Sun Jun 23 19:16:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 19:16:21 2013] Using photon index=1.80, rate=0.000128, arf fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38.arf
[Sun Jun 23 19:16:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 19:16:21 2013] Getting flux using calc_pl_flux failed
[Sun Jun 23 19:16:41 2013] Flag b found in src. 38 procflags, skipping spectral fitting
[Sun Jun 23 19:16:41 2013] Flag c found in src. 38 procflags, skipping spectral fitting
[Sun Jun 23 19:16:41 2013] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 19:16:42 2013] xmm0673002301/analysis//spectral/fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete