[Sat Jun 22 22:43:54 2013] Detection parameters:
  Position = (527.7, 404.1) = 23 27 44.52 -0 11 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 17.8
  Background counts = 30.2
  Rate = 0.0009 +/- 0.0001

[Sat Jun 22 22:43:57 2013] Off-axis axis estimate = 18.30'
[Sat Jun 22 23:47:19 2013] Using EEF radius (= 15.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 23:47:19 2013] Initial guess for spatial extent in simple fitting = 15.58"
[Sat Jun 22 23:47:19 2013] source mask rpix=3.6, npix_max = 66, mask sum = 58, frac = 0.870
[Sat Jun 22 23:47:19 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 15.58"
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15.csv
[Sun Jun 23 03:44:21 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jun 23 03:44:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15.csv
[Sun Jun 23 03:44:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Jun 23 03:44:22 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jun 23 03:44:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Sun Jun 23 03:44:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:20:58 2013] Warning, spatial fit 15 centroid is now closest to src. 6
[Sun Jun 23 08:20:58 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 08:20:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 08:20:58 2013] Assessing source extent using major
[Sun Jun 23 08:20:58 2013] Source does appear to be extended
[Sun Jun 23 08:20:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 08:20:58 2013] Source is confused with source 8
[Sun Jun 23 09:19:39 2013] Using EEF radius (= 15.58 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:19:39 2013] Initial guess for spatial extent in simple fitting = 15.58"
[Sun Jun 23 09:19:39 2013] source mask rpix=3.6, npix_max = 66, mask sum = 58, frac = 0.870
[Sun Jun 23 09:19:39 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 15.58"
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 12:28:54 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 12:28:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 12:28:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 12:28:55 2013] fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 12:28:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 12:28:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673002301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 16:35:38 2013] Source 14 is offset by 1.049439 and -4.207520 pixels which is larger than
2 X fitted extent = 2.744602 x 2.744602, not incorporating fit results
[Sun Jun 23 16:35:38 2013] Warning, spatial fit 14 centroid is now closest to src. 6
[Sun Jun 23 16:35:38 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 16:35:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 16:35:38 2013] Assessing source extent using major
[Sun Jun 23 16:35:38 2013] Source does appear to be extended
[Sun Jun 23 16:35:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 18:00:20 2013] XMMSAS src. selection expression = ellipse(45863.493225, 35109.753723, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 18:00:20 2013] Writing source region out to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun 23 18:00:20 2013] Extracting stamp from image fullrun_mos1_xmm0673002301_pi300-10000_cl_sm2.00.img.gz, (490, 367) - (565, 442)
[Sun Jun 23 18:00:20 2013] XMMSAS bgd. selection expression = annulus(45863.493225, 35109.753723, 1087.500000, 2175.000000, X, Y) && !ellipse(46034.779785, 35966.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44612.438110, 36665.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44295.440887, 37364.739136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45300.972168, 35368.337646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44898.432556, 37265.645477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(46659.354187, 35358.073303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44623.164429, 37884.076141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(45541.783325, 37088.199249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(50370.550000, 30552.206000, 2615.824075, 2615.824075, 0.000000, X, Y) && !ellipse(46871.368896, 34712.444519, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 18:00:20 2013] Writing fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14.gif
[Sun Jun 23 18:05:27 2013] Mean detx,y = (11029.94, 10235.11) 
[Sun Jun 23 18:05:29 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:05:40 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:05:40 2013] Setting source spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 23 18:05:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 23 18:24:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 18:24:07 2013] rmf not generated due to insufficient counts
[Sun Jun 23 19:16:12 2013] Updating aperture counts using extracted products
[Sun Jun 23 19:16:12 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 18.00
[Sun Jun 23 19:16:12 2013] Total counts from fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_bgd.pi.gz = 61.00
[Sun Jun 23 19:16:12 2013] Got source and background scale factors 1682.000000, 3887.000000
[Sun Jun 23 19:16:12 2013] User source parameters:
  Position = (527.7, 404.1) = 23 27 44.52 -0 11 30.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -8.4 +/- 5.3
  Background aperture counts = 26.4
  Rate = -8e-05 +/- 5e-05

[Sun Jun 23 19:16:12 2013] Updating counts from extracted products
[Sun Jun 23 19:16:12 2013] Set source signif. to -8.40/5.14 = -1.63
[Sun Jun 23 19:16:21 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 19:16:21 2013] Using photon index=1.80, rate=-7.6e-05, arf fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14.arf
[Sun Jun 23 19:16:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 19:16:21 2013] Getting flux using calc_pl_flux failed
[Sun Jun 23 19:16:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 19:16:42 2013] xmm0673002301/analysis//spectral/fullrun_mos1_xmm0673002301_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete