[Mon May 27 20:59:59 2013] Detection parameters:
  Position = (441.4, 371.5) = 4 8 50.79 -27 48 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 13.9
  Background counts = 43.7
  Rate = 0.006 +/- 0.001

[Mon May 27 21:00:00 2013] Off-axis axis estimate = 11.64'
[Mon May 27 21:26:09 2013] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Mon May 27 21:26:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 21:26:09 2013] Initial guess for spatial extent in simple fitting = 12.25"
[Mon May 27 21:26:09 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.114
[Mon May 27 21:26:09 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 12.25"
[Mon May 27 22:03:04 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_src8.ximg exists
[Mon May 27 22:03:04 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon May 27 22:03:04 2013] Fit fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_src8 appears to have run properly
[Mon May 27 22:03:04 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon May 27 22:03:04 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon May 27 22:03:04 2013] Fit fullrun_mos1_xmm0672900401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon May 27 22:22:55 2013] Spatial fit model total counts = 150.061000, observed total counts = 152.000000
[Mon May 27 22:22:55 2013] Offset between fit and detection position for source 9 = 3.660973 pixels
[Mon May 27 22:22:55 2013] 145.741200 total counts/ 92.933500 bgd. counts: snr = 5.477862
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.660973 pixels
  Position = (443.7, 374.3) = 4 8 50.04 -27 48 49.4
  Extent = 24.5 (24.5-49.0)" x 10.2 (6.1-15.4)", rotation angle = 111 (90-129) degrees
  Source counts = 52.8 +/- 12.1
  Background counts = 92.9
  Rate = 0.003 +/- 0.0008
[Mon May 27 22:22:55 2013] Vigneting correction estimate = 1.000000
[Mon May 27 22:22:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 22:22:55 2013] Assessing source extent using major axis lower bound
[Mon May 27 22:22:55 2013] Source does appear to be extended
[Mon May 27 22:22:55 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Mon May 27 22:22:55 2013] Source is asymmetric
[Mon May 27 22:22:55 2013] Source is confused with source 8
[Mon May 27 22:48:34 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 22:48:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 22:48:34 2013] Initial guess for spatial extent in simple fitting = 17.33"
[Mon May 27 22:48:34 2013] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.007
[Mon May 27 22:48:34 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 17.33"
[Mon May 27 23:24:39 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8.ximg exists
[Mon May 27 23:24:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8.csv
[Mon May 27 23:24:39 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon May 27 23:24:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8.csv
[Mon May 27 23:24:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 23:24:40 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon May 27 23:24:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 23:24:40 2013] fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon May 27 23:24:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon May 27 23:24:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672900401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 23:40:13 2013] Warning, spatial fit 8 centroid is now closest to src. 8
[Mon May 27 23:40:13 2013] Vigneting correction estimate = 1.000000
[Mon May 27 23:40:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 23:40:13 2013] Assessing source extent using major axis lower bound
[Mon May 27 23:40:13 2013] Source does appear to be extended
[Mon May 27 23:40:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59
[Mon May 27 23:40:13 2013] Source is asymmetric
[Tue May 28 00:03:26 2013] XMMSAS src. selection expression = ellipse(38553.438000, 32517.024800, 1469.754042, 610.032018, 110.517000, X, Y)
[Tue May 28 00:03:26 2013] Writing source region out to fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_src.reg
[Tue May 28 00:03:26 2013] Extracting stamp from image fullrun_mos1_xmm0672900401_pi300-10000_cl_sm2.00.img.gz, (359, 290) - (528, 459)
[Tue May 28 00:03:26 2013] XMMSAS bgd. selection expression = annulus(38553.438000, 32517.024800, 2449.590070, 4899.180141, X, Y) && !ellipse(35066.872345, 34552.149780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36909.457367, 29206.195190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34636.174000, 27849.328000, 1318.360038, 1318.360038, 0.000000, X, Y) && !ellipse(36203.676239, 27619.278870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37700.287048, 30516.669861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41426.357819, 35182.687378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39610.315125, 32377.415283, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 00:03:26 2013] Writing fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9.gif
[Tue May 28 00:06:12 2013] Mean detx,y = (11297.74, 5005.84) 
[Tue May 28 00:06:14 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 00:06:50 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 00:06:51 2013] Setting source spectrum file to fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 28 00:06:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 28 00:13:20 2013] Not generating rmf since there are only 52 counts
[Tue May 28 00:13:20 2013] rmf not generated due to insufficient counts
[Tue May 28 00:30:59 2013] Updating aperture counts using extracted products
[Tue May 28 00:30:59 2013] Total counts from fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 178.00
[Tue May 28 00:30:59 2013] Total counts from fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 2711.00
[Tue May 28 00:30:59 2013] Got source and background scale factors 2763140.000000, 40681024.000000
[Tue May 28 00:30:59 2013] User source parameters:
  Position = (443.7, 374.3) = 4 8 50.04 -27 48 49.4
  Extent = 24.5 (24.5-49.0)" x 10.2 (6.1-15.4)", rotation angle = 111 (90-129) degrees
  Source aperture counts = -6.1 +/- 14.4
  Background aperture counts = 184.1
  Rate = -0.0004 +/- 0.0009

[Tue May 28 00:31:02 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 00:31:02 2013] Using photon index=1.80, rate=0.00338, arf fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9.arf
[Tue May 28 00:31:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 00:31:02 2013] Updating source flux to 6.1e-14
[Tue May 28 00:31:07 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Tue May 28 00:31:07 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 28 00:31:08 2013] xmm0672900401/analysis//spectral/fullrun_mos1_xmm0672900401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete