[Wed Jun 12 01:31:08 2013] Detection parameters:
  Position = (220.5, 271.7) = 9 5 6.33 -32 23 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 9.4
  Background counts = 15.0
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 01:31:08 2013] Off-axis axis estimate = 5.97'
[Wed Jun 12 01:45:31 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 01:45:31 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Wed Jun 12 01:45:31 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Wed Jun 12 01:45:31 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.42"
[Wed Jun 12 02:15:59 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jun 12 02:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17.csv
[Wed Jun 12 02:15:59 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jun 12 02:15:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17.csv
[Wed Jun 12 02:15:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 02:16:00 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jun 12 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jun 12 02:16:00 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jun 12 02:16:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jun 12 02:16:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672890201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 02:42:13 2013] Spatial fit model total counts = 191.938000, observed total counts = 172.000000
[Wed Jun 12 02:42:13 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 12 02:42:13 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 02:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 02:42:13 2013] Assessing source extent using major
[Wed Jun 12 02:42:13 2013] Source does appear to be extended
[Wed Jun 12 02:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 02:48:48 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 02:48:48 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Wed Jun 12 02:48:48 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Wed Jun 12 02:48:48 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.42"
[Wed Jun 12 03:18:32 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun 12 03:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17.csv
[Wed Jun 12 03:18:32 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun 12 03:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17.csv
[Wed Jun 12 03:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 03:18:32 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun 12 03:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 03:18:32 2013] fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun 12 03:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Wed Jun 12 03:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672890201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 03:43:39 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 12.874618 pixels away
[Wed Jun 12 03:43:39 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 03:43:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 03:43:39 2013] Assessing source extent using major
[Wed Jun 12 03:43:39 2013] Source does appear to be extended
[Wed Jun 12 03:43:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 04:08:14 2013] XMMSAS src. selection expression = ellipse(19135.816422, 23589.809937, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 04:08:14 2013] Writing source region out to fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 12 04:08:14 2013] Extracting stamp from image fullrun_mos1_xmm0672890201_pi300-10000_cl_sm2.00.img.gz, (183, 234) - (258, 309)
[Wed Jun 12 04:08:14 2013] XMMSAS bgd. selection expression = annulus(19135.816422, 23589.809937, 1087.500000, 2175.000000, X, Y) && !ellipse(18271.030200, 22068.248400, 468.530413, 468.530413, 0.000000, X, Y) && !ellipse(16234.125610, 21357.252884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19071.040200, 25300.277000, 484.004814, 287.382408, 105.187845, X, Y) && !ellipse(20877.710000, 26287.266200, 524.284015, 308.516809, 307.194000, X, Y) && !ellipse(21412.115082, 26188.170288, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 04:08:14 2013] Writing fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14.gif
[Wed Jun 12 04:11:57 2013] Mean detx,y = (-1972.40, 5771.34) 
[Wed Jun 12 04:11:57 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 04:12:11 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 04:12:11 2013] Setting source spectrum file to fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 12 04:12:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun 12 04:17:01 2013] Not generating rmf since there are only 44 counts
[Wed Jun 12 04:17:01 2013] rmf not generated due to insufficient counts
[Wed Jun 12 04:30:08 2013] Updating aperture counts using extracted products
[Wed Jun 12 04:30:08 2013] Total counts from fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 143.00
[Wed Jun 12 04:30:08 2013] Total counts from fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_bgd.pi.gz = 690.00
[Wed Jun 12 04:30:08 2013] Got source and background scale factors 1294566.000000, 9300820.000000
[Wed Jun 12 04:30:08 2013] User source parameters:
  Position = (220.5, 271.7) = 9 5 6.33 -32 23 4.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 47.0 +/- 13.0
  Background aperture counts = 96.0
  Rate = 0.002 +/- 0.0004

[Wed Jun 12 04:30:08 2013] Updating counts from extracted products
[Wed Jun 12 04:30:08 2013] Set source signif. to 46.96/9.80 = 4.79
[Wed Jun 12 04:30:09 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 04:30:09 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14.arf
[Wed Jun 12 04:30:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 04:30:09 2013] Updating source flux to 2.1e-14
[Wed Jun 12 04:30:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 04:30:13 2013] xmm0672890201/analysis//spectral/fullrun_mos1_xmm0672890201_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete