[Mon Jun 10 22:33:43 2013] Detection parameters:
  Position = (382.6, 137.9) = 13 36 0.91 -34 11 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 16.7
  Background counts = 73.6
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 22:33:44 2013] Off-axis axis estimate = 13.14'
[Mon Jun 10 22:34:09 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:09 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Mon Jun 10 22:34:09 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.883
[Mon Jun 10 22:34:09 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 13.00"
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26.csv
[Mon Jun 10 22:34:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jun 10 22:34:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:27 2013] Spatial fit model total counts = 525.437000, observed total counts = 472.000000
[Mon Jun 10 22:34:27 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 22:34:27 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:34:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:34:27 2013] Assessing source extent using major
[Mon Jun 10 22:34:27 2013] Source does appear to be extended
[Mon Jun 10 22:34:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:34:41 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:41 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Mon Jun 10 22:34:41 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.883
[Mon Jun 10 22:34:41 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 13.00"
[Mon Jun 10 22:34:41 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26.csv
[Mon Jun 10 22:34:41 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26.csv
[Mon Jun 10 22:34:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:42 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jun 10 22:34:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jun 10 22:34:42 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jun 10 22:34:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Jun 10 22:34:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:35:00 2013] Spatial fit model total counts = 525.220000, observed total counts = 472.000000
[Mon Jun 10 22:35:00 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 22:35:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:35:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:35:00 2013] Assessing source extent using major
[Mon Jun 10 22:35:00 2013] Source does appear to be extended
[Mon Jun 10 22:35:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:36:07 2013] XMMSAS src. selection expression = ellipse(33237.365997, 11945.046585, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 22:36:07 2013] Not overwriting source region fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun 10 22:36:07 2013] Extracting stamp from image fullrun_mos2_xmm0672870101_pi300-10000_cl_sm2.00.img.gz, (345, 100) - (420, 175)
[Mon Jun 10 22:36:07 2013] XMMSAS bgd. selection expression = annulus(33237.365997, 11945.046585, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 22:36:07 2013] Writing fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4.gif
[Mon Jun 10 22:36:08 2013] ../../xmm0672870101/products/events/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0672870101/products/events/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Mon Jun 10 22:36:08 2013] Mean detx,y = (-5775.05, -15788.51) 
[Mon Jun 10 22:36:08 2013] ../../xmm0672870101/products/images/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0672870101/products/images/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Mon Jun 10 22:36:08 2013] ../../xmm0672870101/products/spectra/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.pi and ../../xmm0672870101/products/spectra/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Mon Jun 10 22:36:08 2013] Setting source spectrum file to fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.pi.gz
[Mon Jun 10 22:36:08 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun 10 22:36:08 2013] ../../xmm0672870101/products/lightcurves/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0672870101/products/lightcurves/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Mon Jun 10 22:36:14 2013] Not generating rmf since there are only 85 counts
[Mon Jun 10 22:36:14 2013] rmf not generated due to insufficient counts
[Mon Jun 10 22:37:59 2013] Updating aperture counts using extracted products
[Mon Jun 10 22:37:59 2013] Total counts from fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_src.pi.gz = 281.00
[Mon Jun 10 22:37:59 2013] Total counts from fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1470.00
[Mon Jun 10 22:37:59 2013] Got source and background scale factors 1213950.000000, 6979027.000000
[Mon Jun 10 22:38:00 2013] User source parameters:
  Position = (382.6, 137.9) = 13 36 0.91 -34 11 6.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 25.3 +/- 17.8
  Background aperture counts = 255.7
  Rate = 0.0004 +/- 0.0003

[Mon Jun 10 22:38:00 2013] Updating counts from extracted products
[Mon Jun 10 22:38:00 2013] Set source signif. to 25.30/15.99 = 1.58
[Mon Jun 10 22:38:00 2013] No arf file for this source, not re-computing flux
[Mon Jun 10 22:38:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 22:38:04 2013] xmm0672870101/analysis//spectral/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete