[Mon Jun 10 22:33:44 2013] Detection parameters:
  Position = (314.4, 267.5) = 13 36 24.81 -34 1 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.3 +/- 18.4
  Background counts = 125.8
  Rate = 0.002 +/- 0.0003

[Mon Jun 10 22:33:44 2013] Off-axis axis estimate = 2.52'
[Mon Jun 10 22:34:09 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:09 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Jun 10 22:34:09 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.215
[Mon Jun 10 22:34:09 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.69"
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17.csv
[Mon Jun 10 22:34:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 22:34:09 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 10 22:34:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 10 22:34:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:27 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.328028 pixels away
[Mon Jun 10 22:34:27 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:34:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:34:27 2013] Assessing source extent using major
[Mon Jun 10 22:34:27 2013] Source does appear to be extended
[Mon Jun 10 22:34:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:34:41 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:41 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon Jun 10 22:34:41 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.215
[Mon Jun 10 22:34:41 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.69"
[Mon Jun 10 22:34:41 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 22:34:41 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 22:34:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:42 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 10 22:34:42 2013] fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 10 22:34:42 2013] Fit fullrun_mos2_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 10 22:35:00 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 33.083379 pixels away
[Mon Jun 10 22:35:00 2013] Spatial fit model total counts = 661.651000, observed total counts = 631.000000
[Mon Jun 10 22:35:00 2013] Offset between fit and detection position for source 17 = 0.225593 pixels
[Mon Jun 10 22:35:00 2013] 654.116600 total counts/ 584.483000 bgd. counts: snr = 2.880268
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.225593 pixels
  Position = (314.6, 267.6) = 13 36 24.74 -34 1 40.5
  Extent = 4.2 (3.1-5.6)", rotation angle = 0
  Source counts = 69.6 +/- 25.6
  Background counts = 584.5
  Rate = 0.001 +/- 0.0004
[Mon Jun 10 22:35:00 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:35:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:35:00 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 22:35:00 2013] Source does appear to be extended
[Mon Jun 10 22:35:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:36:07 2013] XMMSAS src. selection expression = ellipse(27324.359800, 23235.832000, 252.304528, 252.304528, 0.000000, X, Y)
[Mon Jun 10 22:36:07 2013] Not overwriting source region fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.reg
[Mon Jun 10 22:36:07 2013] Extracting stamp from image fullrun_mos2_xmm0672870101_pi300-10000_cl_sm2.00.img.gz, (300, 253) - (329, 282)
[Mon Jun 10 22:36:07 2013] XMMSAS bgd. selection expression = annulus(27324.359800, 23235.832000, 420.507547, 841.015093, X, Y)
[Mon Jun 10 22:36:07 2013] Writing fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17.gif
[Mon Jun 10 22:36:07 2013] ../../xmm0672870101/products/events/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0672870101/products/events/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Mon Jun 10 22:36:07 2013] Mean detx,y = (-152.17, -4346.60) 
[Mon Jun 10 22:36:07 2013] ../../xmm0672870101/products/images/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0672870101/products/images/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Mon Jun 10 22:36:07 2013] ../../xmm0672870101/products/spectra/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.pi and ../../xmm0672870101/products/spectra/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Mon Jun 10 22:36:07 2013] Setting source spectrum file to fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.pi.gz
[Mon Jun 10 22:36:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Jun 10 22:36:07 2013] ../../xmm0672870101/products/lightcurves/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0672870101/products/lightcurves/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Mon Jun 10 22:36:13 2013] Not generating rmf since there are only 69 counts
[Mon Jun 10 22:36:13 2013] rmf not generated due to insufficient counts
[Mon Jun 10 22:37:58 2013] Updating aperture counts using extracted products
[Mon Jun 10 22:37:58 2013] Total counts from fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_src.pi.gz = 126.00
[Mon Jun 10 22:37:58 2013] Total counts from fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 487.00
[Mon Jun 10 22:37:58 2013] Got source and background scale factors 203200.000000, 1505800.000000
[Mon Jun 10 22:37:58 2013] User source parameters:
  Position = (314.6, 267.6) = 13 36 24.74 -34 1 40.5
  Extent = 4.2 (3.1-5.6)", rotation angle = 0
  Source aperture counts = 60.3 +/- 12.3
  Background aperture counts = 65.7
  Rate = 0.001 +/- 0.0002

[Mon Jun 10 22:38:00 2013] No arf file for this source, not re-computing flux
[Mon Jun 10 22:38:03 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jun 10 22:38:04 2013] xmm0672870101/analysis//spectral/fullrun_mos2_xmm0672870101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete