[Mon Jun 10 22:33:42 2013] Detection parameters:
  Position = (450.7, 447.2) = 13 35 37.27 -33 48 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.2 +/- 19.1
  Background counts = 87.5
  Rate = 0.001 +/- 0.0003

[Mon Jun 10 22:33:43 2013] Off-axis axis estimate = 15.43'
[Mon Jun 10 22:34:08 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 22:34:08 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Mon Jun 10 22:34:08 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.995
[Mon Jun 10 22:34:08 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 14.15"
[Mon Jun 10 22:34:08 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 10 22:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 22:34:08 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 10 22:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 22:34:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:08 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 10 22:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 22:34:08 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 10 22:34:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 22:34:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672870101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:22 2013] Spatial fit model total counts = 689.197000, observed total counts = 614.000000
[Mon Jun 10 22:34:22 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 22:34:22 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:34:22 2013] Assessing source extent using major
[Mon Jun 10 22:34:22 2013] Source does appear to be extended
[Mon Jun 10 22:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:34:40 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:34:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 22:34:40 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Mon Jun 10 22:34:40 2013] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.995
[Mon Jun 10 22:34:40 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 14.15"
[Mon Jun 10 22:34:40 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jun 10 22:34:40 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jun 10 22:34:40 2013] Fit fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_src18 appears to have run properly
[Mon Jun 10 22:34:41 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 10 22:34:41 2013] fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jun 10 22:34:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 10 22:34:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672870101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:34:55 2013] Source 8 is offset by 2.953417 and -3.794991 pixels which is larger than
2 X fitted extent = 13.007127 x 3.640235, not incorporating fit results
[Mon Jun 10 22:34:55 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:34:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:34:55 2013] Assessing source extent using major
[Mon Jun 10 22:34:55 2013] Source does appear to be extended
[Mon Jun 10 22:34:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:35:34 2013] XMMSAS src. selection expression = ellipse(39161.575348, 38858.886078, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 22:35:34 2013] Not overwriting source region fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_src.reg
[Mon Jun 10 22:35:34 2013] Extracting stamp from image fullrun_mos1_xmm0672870101_pi300-10000_cl_sm2.00.img.gz, (413, 410) - (488, 485)
[Mon Jun 10 22:35:34 2013] XMMSAS bgd. selection expression = annulus(39161.575348, 38858.886078, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 22:35:34 2013] Writing fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8.gif
[Mon Jun 10 22:35:39 2013] Mean detx,y = (11113.82, 12242.64) 
[Mon Jun 10 22:35:40 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 22:35:57 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 22:35:57 2013] Setting source spectrum file to fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Jun 10 22:35:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Jun 10 22:36:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 22:36:01 2013] rmf not generated due to insufficient counts
[Mon Jun 10 22:37:55 2013] Updating aperture counts using extracted products
[Mon Jun 10 22:37:55 2013] Total counts from fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 342.00
[Mon Jun 10 22:37:56 2013] Total counts from fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1487.00
[Mon Jun 10 22:37:56 2013] Got source and background scale factors 1298014.000000, 5984059.000000
[Mon Jun 10 22:37:56 2013] User source parameters:
  Position = (450.7, 447.2) = 13 35 37.27 -33 48 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19.5 +/- 19.5
  Background aperture counts = 322.5
  Rate = 0.0003 +/- 0.0003

[Mon Jun 10 22:37:56 2013] Updating counts from extracted products
[Mon Jun 10 22:37:56 2013] Set source signif. to 19.45/17.96 = 1.08
[Mon Jun 10 22:37:56 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 22:37:56 2013] Using photon index=1.80, rate=0.000317, arf fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8.arf
[Mon Jun 10 22:37:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 22:37:56 2013] Updating source flux to 8.2e-15
[Mon Jun 10 22:38:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 22:38:03 2013] xmm0672870101/analysis//spectral/fullrun_mos1_xmm0672870101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete