[Sat Jun 8 21:42:33 2013] Detection parameters: Position = (369.7, 236.8) = 10 0 23.61 2 0 29.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 131.8 +/- 27.2 Background counts = 379.1 Rate = 0.002 +/- 0.0004 [Sat Jun 8 21:42:35 2013] Off-axis axis estimate = 6.83' [Sat Jun 8 21:43:10 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 21:43:10 2013] Initial guess for spatial extent in simple fitting = 9.84" [Sat Jun 8 21:43:10 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983 [Sat Jun 8 21:43:10 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 9.84" [Sat Jun 8 21:43:12 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44.ximg exists [Sat Jun 8 21:43:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44.csv [Sat Jun 8 21:43:12 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44_1.ximg exists [Sat Jun 8 21:43:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44.csv [Sat Jun 8 21:43:12 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:43:13 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Sat Jun 8 21:43:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44.csv [Sat Jun 8 21:43:13 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Sat Jun 8 21:43:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44.csv [Sat Jun 8 21:43:13 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:43:30 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 13.257468 pixels away [Sat Jun 8 21:43:30 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 21:43:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 21:43:30 2013] Assessing source extent using major [Sat Jun 8 21:43:30 2013] Source does appear to be extended [Sat Jun 8 21:43:30 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 21:44:00 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 21:44:00 2013] Initial guess for spatial extent in simple fitting = 9.84" [Sat Jun 8 21:44:00 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983 [Sat Jun 8 21:44:00 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 9.84" [Sat Jun 8 21:44:02 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43.ximg exists [Sat Jun 8 21:44:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43.csv [Sat Jun 8 21:44:02 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43_1.ximg exists [Sat Jun 8 21:44:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43.csv [Sat Jun 8 21:44:02 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:44:03 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists [Sat Jun 8 21:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43.csv [Sat Jun 8 21:44:03 2013] fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists [Sat Jun 8 21:44:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43.csv [Sat Jun 8 21:44:03 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:44:19 2013] Source 50 is offset by 3.546644 and -2.879543 pixels which is larger than 2 X fitted extent = 1.547628 x 1.547628, not incorporating fit results [Sat Jun 8 21:44:20 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 21:44:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 21:44:20 2013] Assessing source extent using major [Sat Jun 8 21:44:20 2013] Source does appear to be extended [Sat Jun 8 21:44:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 21:44:50 2013] XMMSAS src. selection expression = ellipse(32111.230011, 20552.520142, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 21:44:50 2013] Not overwriting source region fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_src.reg [Sat Jun 8 21:44:50 2013] Extracting stamp from image fullrun_pn_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (332, 199) - (407, 274) [Sat Jun 8 21:44:50 2013] XMMSAS bgd. selection expression = annulus(32111.230011, 20552.520142, 1087.500000, 2175.000000, X, Y) && !ellipse(31596.051600, 18621.684600, 490.342414, 490.342414, 0.000000, X, Y) && !ellipse(34938.313171, 21076.317596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.215906, 21020.973800, 460.906413, 460.906413, 0.000000, X, Y) && !ellipse(33918.795197, 20230.377472, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 21:44:50 2013] Writing fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50.gif [Sat Jun 8 22:16:36 2013] Mean detx,y = (2600.07, 8758.58) [Sat Jun 8 22:16:40 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 22:17:04 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 22:17:05 2013] Setting source spectrum file to fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_src_b10.pi.gz [Sat Jun 8 22:17:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_bgd.pi.gz [Sat Jun 8 23:05:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 23:05:56 2013] rmf not generated due to insufficient counts [Sat Jun 8 23:20:23 2013] Updating aperture counts using extracted products [Sat Jun 8 23:20:23 2013] Total counts from fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 766.00 [Sat Jun 8 23:20:23 2013] Total counts from fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_bgd.pi.gz = 5184.00 [Sat Jun 8 23:20:23 2013] Got source and background scale factors 1184188.000000, 7904019.000000 [Sat Jun 8 23:20:23 2013] User source parameters: Position = (369.7, 236.8) = 10 0 23.61 2 0 29.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -10.7 +/- 28.7 Background aperture counts = 776.7 Rate = -0.0002 +/- 0.0004 [Sat Jun 8 23:20:23 2013] Updating counts from extracted products [Sat Jun 8 23:20:23 2013] Set source signif. to -10.67/27.87 = -0.38 [Sat Jun 8 23:20:29 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 23:20:29 2013] Using photon index=1.80, rate=-0.000165, arf fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50.arf [Sat Jun 8 23:20:29 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 23:20:29 2013] Updated flux is not positive, keeping original flux [Sat Jun 8 23:20:50 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 23:20:56 2013] xmm0672780101/analysis//spectral/fullrun_pn_xmm0672780101_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete