[Sat Jun  8 21:42:39 2013] Detection parameters:
  Position = (187.2, 275.5) = 10 1 16.55 2 3 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.7 +/- 18.3
  Background counts = 102.4
  Rate = 0.0008 +/- 0.0001

[Sat Jun  8 21:42:40 2013] Off-axis axis estimate = 8.23'
[Sat Jun  8 21:43:15 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:43:15 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Sat Jun  8 21:43:15 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.877
[Sat Jun  8 21:43:15 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 10.54"
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41.ximg exists
[Sat Jun  8 21:43:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41.csv
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sat Jun  8 21:43:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41.csv
[Sat Jun  8 21:43:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sat Jun  8 21:43:16 2013] Fit fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Sat Jun  8 21:43:44 2013] Spatial fit model total counts = 785.708000, observed total counts = 785.000000
[Sat Jun  8 21:43:44 2013] Offset between fit and detection position for source 36 = 0.209869 pixels
[Sat Jun  8 21:43:44 2013] 782.672800 total counts/ 722.345000 bgd. counts: snr = 2.244632
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.209869 pixels
  Position = (187.4, 275.6) = 10 1 16.50 2 3 17.6
  Extent = 4.9 (3.7-6.9)", rotation angle = 0
  Source counts = 60.3 +/- 28.0
  Background counts = 722.3
  Rate = 0.0005 +/- 0.0002
[Sat Jun  8 21:43:44 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:43:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:43:44 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 21:43:44 2013] Source does appear to be extended
[Sat Jun  8 21:43:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 21:44:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:44:05 2013] Initial guess for spatial extent in simple fitting = 4.90"
[Sat Jun  8 21:44:05 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.850
[Sat Jun  8 21:44:05 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 4.90"
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jun  8 21:44:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41.csv
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jun  8 21:44:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41.csv
[Sat Jun  8 21:44:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jun  8 21:44:06 2013] Fit fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Jun  8 21:44:32 2013] Spatial fit model total counts = 778.999000, observed total counts = 779.000000
[Sat Jun  8 21:44:32 2013] Offset between fit and detection position for source 36 = 0.031338 pixels
[Sat Jun  8 21:44:32 2013] 770.103800 total counts/ 710.000000 bgd. counts: snr = 2.255655
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.031338 pixels
  Position = (187.4, 275.7) = 10 1 16.50 2 3 17.7
  Extent = 5.0 (3.6-7.2)", rotation angle = 0
  Source counts = 60.1 +/- 27.8
  Background counts = 710.0
  Rate = 0.0005 +/- 0.0002
[Sat Jun  8 21:44:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:44:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:44:32 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 21:44:32 2013] Source does appear to be extended
[Sat Jun  8 21:44:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:17:02 2013] XMMSAS src. selection expression = ellipse(16254.918400, 23934.759200, 302.509809, 302.509809, 0.000000, X, Y)
[Sat Jun  8 23:17:02 2013] Not overwriting source region fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.reg
[Sat Jun  8 23:17:02 2013] Extracting stamp from image fullrun_mos2_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (170, 258) - (205, 293)
[Sat Jun  8 23:17:02 2013] XMMSAS bgd. selection expression = annulus(16254.918400, 23934.759200, 504.183015, 1008.366029, X, Y) && !ellipse(16697.064484, 22558.410706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15078.544022, 24382.261841, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 23:17:02 2013] Writing fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36.gif
[Sat Jun  8 23:17:04 2013] ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Sat Jun  8 23:17:04 2013] Mean detx,y = (10915.05, 60.57) 
[Sat Jun  8 23:17:04 2013] ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.img and ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Sat Jun  8 23:17:04 2013] ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Sat Jun  8 23:17:04 2013] Setting source spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.pi.gz
[Sat Jun  8 23:17:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jun  8 23:17:04 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Sat Jun  8 23:17:15 2013] Not generating rmf since there are only 60 counts
[Sat Jun  8 23:17:15 2013] rmf not generated due to insufficient counts
[Sat Jun  8 23:20:44 2013] Updating aperture counts using extracted products
[Sat Jun  8 23:20:44 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_src.pi.gz = 169.00
[Sat Jun  8 23:20:44 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_bgd.pi.gz = 586.00
[Sat Jun  8 23:20:44 2013] Got source and background scale factors 288000.000000, 1497600.000000
[Sat Jun  8 23:20:44 2013] User source parameters:
  Position = (187.4, 275.7) = 10 1 16.50 2 3 17.7
  Extent = 5.0 (3.6-7.2)", rotation angle = 0
  Source aperture counts = 56.3 +/- 14.0
  Background aperture counts = 112.7
  Rate = 0.0005 +/- 0.0001

[Sat Jun  8 23:20:45 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 23:20:49 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  8 23:20:50 2013] xmm0672780101/analysis//spectral/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete