[Sat Jun  8 21:42:39 2013] Detection parameters:
  Position = (366.4, 317.6) = 10 0 24.56 2 6 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.2 +/- 28.4
  Background counts = 139.7
  Rate = 0.004 +/- 0.0003

[Sat Jun  8 21:42:40 2013] Off-axis axis estimate = 5.12'
[Sat Jun  8 21:43:15 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:43:15 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Sat Jun  8 21:43:15 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.949
[Sat Jun  8 21:43:15 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.99"
[Sat Jun  8 21:43:15 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun  8 21:43:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7.csv
[Sat Jun  8 21:43:15 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun  8 21:43:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7.csv
[Sat Jun  8 21:43:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun  8 21:43:16 2013] Fit fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Jun  8 21:43:44 2013] Spatial fit model total counts = 1172.000000, observed total counts = 1172.000000
[Sat Jun  8 21:43:44 2013] Offset between fit and detection position for source 27 = 0.078599 pixels
[Sat Jun  8 21:43:44 2013] 1174.812000 total counts/ 984.860000 bgd. counts: snr = 6.052804
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.078599 pixels
  Position = (366.3, 317.6) = 10 0 24.58 2 6 20.2
  Extent = 4.0 (3.4-4.5)", rotation angle = 0
  Source counts = 190.0 +/- 34.3
  Background counts = 984.9
  Rate = 0.002 +/- 0.0003
[Sat Jun  8 21:43:44 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:43:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:43:44 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 21:43:44 2013] Source does appear to be extended
[Sat Jun  8 21:43:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 21:44:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:44:05 2013] Initial guess for spatial extent in simple fitting = 3.95"
[Sat Jun  8 21:44:05 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.134
[Sat Jun  8 21:44:05 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 3.95"
[Sat Jun  8 21:44:05 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7.csv
[Sat Jun  8 21:44:05 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7.csv
[Sat Jun  8 21:44:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun  8 21:44:06 2013] Fit fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Jun  8 21:44:32 2013] Spatial fit model total counts = 1172.000000, observed total counts = 1172.000000
[Sat Jun  8 21:44:32 2013] Offset between fit and detection position for source 27 = 0.000070 pixels
[Sat Jun  8 21:44:32 2013] 1174.813000 total counts/ 984.844000 bgd. counts: snr = 6.053395
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.000070 pixels
  Position = (366.3, 317.6) = 10 0 24.58 2 6 20.2
  Extent = 4.0 (3.4-4.5)", rotation angle = 0
  Source counts = 190.0 +/- 34.3
  Background counts = 984.8
  Rate = 0.002 +/- 0.0003
[Sat Jun  8 21:44:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:44:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:44:32 2013] Assessing source extent using major axis lower bound
[Sat Jun  8 21:44:32 2013] Source does appear to be extended
[Sat Jun  8 21:44:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:17:01 2013] XMMSAS src. selection expression = ellipse(31820.139800, 27583.316600, 237.146664, 237.146664, 0.000000, X, Y)
[Sat Jun  8 23:17:01 2013] Not overwriting source region fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun  8 23:17:01 2013] Extracting stamp from image fullrun_mos2_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (353, 304) - (380, 331)
[Sat Jun  8 23:17:01 2013] XMMSAS bgd. selection expression = annulus(31820.139800, 27583.316600, 395.244440, 790.488880, X, Y) && !ellipse(31558.229889, 29072.466675, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  8 23:17:01 2013] Writing fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27.gif
[Sat Jun  8 23:17:02 2013] ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sat Jun  8 23:17:02 2013] Mean detx,y = (-4908.26, -2239.08) 
[Sat Jun  8 23:17:02 2013] ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.img and ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Sat Jun  8 23:17:02 2013] ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sat Jun  8 23:17:02 2013] Setting source spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.pi.gz
[Sat Jun  8 23:17:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun  8 23:17:02 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sat Jun  8 23:20:38 2013] Updating aperture counts using extracted products
[Sat Jun  8 23:20:38 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_src.pi.gz = 274.00
[Sat Jun  8 23:20:38 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 691.00
[Sat Jun  8 23:20:38 2013] Got source and background scale factors 176000.000000, 1411200.000000
[Sat Jun  8 23:20:38 2013] User source parameters:
  Position = (366.3, 317.6) = 10 0 24.58 2 6 20.2
  Extent = 4.0 (3.4-4.5)", rotation angle = 0
  Source aperture counts = 187.8 +/- 17.6
  Background aperture counts = 86.2
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 23:20:45 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 23:20:49 2013] Source 27 has no response, skipping
[Sat Jun  8 23:20:50 2013] xmm0672780101/analysis//spectral/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete