[Sat Jun  8 21:42:38 2013] Detection parameters:
  Position = (371.7, 350.0) = 10 0 23.02 2 8 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.9 +/- 24.5
  Background counts = 142.2
  Rate = 0.003 +/- 0.0003

[Sat Jun  8 21:42:40 2013] Off-axis axis estimate = 6.50'
[Sat Jun  8 21:43:15 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:43:15 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Sat Jun  8 21:43:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.943
[Sat Jun  8 21:43:15 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.68"
[Sat Jun  8 21:43:15 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun  8 21:43:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10.csv
[Sat Jun  8 21:43:15 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun  8 21:43:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10.csv
[Sat Jun  8 21:43:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun  8 21:43:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun  8 21:43:16 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun  8 21:43:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun  8 21:43:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:44 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.506937 pixels away
[Sat Jun  8 21:43:44 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:43:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:43:44 2013] Assessing source extent using major
[Sat Jun  8 21:43:44 2013] Source does appear to be extended
[Sat Jun  8 21:43:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 21:44:05 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:44:05 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Sat Jun  8 21:44:05 2013] source mask rpix=2.2, npix_max = 29, mask sum = 28, frac = 0.943
[Sat Jun  8 21:44:05 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.68"
[Sat Jun  8 21:44:05 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10.csv
[Sat Jun  8 21:44:05 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10.csv
[Sat Jun  8 21:44:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun  8 21:44:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun  8 21:44:06 2013] fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun  8 21:44:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun  8 21:44:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:32 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.089244 pixels away
[Sat Jun  8 21:44:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:44:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:44:32 2013] Assessing source extent using major
[Sat Jun  8 21:44:32 2013] Source does appear to be extended
[Sat Jun  8 21:44:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:17:01 2013] XMMSAS src. selection expression = ellipse(32288.344360, 30403.023987, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 23:17:01 2013] Not overwriting source region fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.reg
[Sat Jun  8 23:17:01 2013] Extracting stamp from image fullrun_mos2_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (334, 313) - (409, 388)
[Sat Jun  8 23:17:02 2013] XMMSAS bgd. selection expression = annulus(32288.344360, 30403.023987, 1087.500000, 2175.000000, X, Y) && !ellipse(31558.229889, 29072.466675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31039.569800, 31866.715920, 361.693610, 361.693610, 0.000000, X, Y)
[Sat Jun  8 23:17:02 2013] Writing fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20.gif
[Sat Jun  8 23:17:03 2013] ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0672780101/products/events/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Sat Jun  8 23:17:03 2013] Mean detx,y = (-6311.76, 210.82) 
[Sat Jun  8 23:17:03 2013] ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0672780101/products/images/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Sat Jun  8 23:17:03 2013] ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Sat Jun  8 23:17:03 2013] Setting source spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.pi.gz
[Sat Jun  8 23:17:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Jun  8 23:17:03 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Sat Jun  8 23:17:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 23:17:12 2013] rmf not generated due to insufficient counts
[Sat Jun  8 23:20:38 2013] Updating aperture counts using extracted products
[Sat Jun  8 23:20:38 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_src.pi.gz = 744.00
[Sat Jun  8 23:20:38 2013] Total counts from fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 4012.00
[Sat Jun  8 23:20:38 2013] Got source and background scale factors 1211512.000000, 8577951.000000
[Sat Jun  8 23:20:38 2013] User source parameters:
  Position = (371.7, 350.0) = 10 0 23.02 2 8 41.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 177.4 +/- 28.3
  Background aperture counts = 566.6
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 23:20:38 2013] Updating counts from extracted products
[Sat Jun  8 23:20:38 2013] Set source signif. to 177.36/23.80 = 7.45
[Sat Jun  8 23:20:45 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 23:20:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 23:20:50 2013] xmm0672780101/analysis//spectral/fullrun_mos2_xmm0672780101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete