[Sat Jun 8 21:42:37 2013] Detection parameters: Position = (487.3, 253.2) = 9 59 49.48 2 1 38.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 259.4 +/- 24.6 Background counts = 94.1 Rate = 0.002 +/- 0.0002 [Sat Jun 8 21:42:37 2013] Off-axis axis estimate = 14.08' [Sat Jun 8 21:43:13 2013] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 21:43:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 21:43:13 2013] Initial guess for spatial extent in simple fitting = 13.47" [Sat Jun 8 21:43:13 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.870 [Sat Jun 8 21:43:13 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.47" [Sat Jun 8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19.ximg exists [Sat Jun 8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19.csv [Sat Jun 8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19_1.ximg exists [Sat Jun 8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19.csv [Sat Jun 8 21:43:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists [Sat Jun 8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists [Sat Jun 8 21:43:14 2013] Fit fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly [Sat Jun 8 21:43:36 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 18.297203 pixels away [Sat Jun 8 21:43:36 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 21:43:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 21:43:36 2013] Assessing source extent using major [Sat Jun 8 21:43:36 2013] Source does appear to be extended [Sat Jun 8 21:43:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 21:44:04 2013] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 21:44:04 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 8 21:44:04 2013] Initial guess for spatial extent in simple fitting = 13.47" [Sat Jun 8 21:44:04 2013] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.870 [Sat Jun 8 21:44:04 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 13.47" [Sat Jun 8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17.ximg exists [Sat Jun 8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17.csv [Sat Jun 8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17_1.ximg exists [Sat Jun 8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17.csv [Sat Jun 8 21:44:04 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Sat Jun 8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat Jun 8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Sat Jun 8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat Jun 8 21:44:05 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 21:44:25 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 13.012266 pixels away [Sat Jun 8 21:44:26 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 21:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 21:44:26 2013] Assessing source extent using major [Sat Jun 8 21:44:26 2013] Source does appear to be extended [Sat Jun 8 21:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 23:16:49 2013] XMMSAS src. selection expression = ellipse(42344.703247, 21977.608444, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 23:16:49 2013] Not overwriting source region fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.reg [Sat Jun 8 23:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (450, 216) - (525, 291) [Sat Jun 8 23:16:49 2013] XMMSAS bgd. selection expression = annulus(42344.703247, 21977.608444, 1087.500000, 2175.000000, X, Y) [Sat Jun 8 23:16:49 2013] Writing fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35.gif [Sat Jun 8 23:16:50 2013] ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create [Sat Jun 8 23:16:50 2013] Mean detx,y = (-11059.49, 12332.21) [Sat Jun 8 23:16:50 2013] ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.img and ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create [Sat Jun 8 23:16:50 2013] ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create [Sat Jun 8 23:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.pi.gz [Sat Jun 8 23:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.pi.gz [Sat Jun 8 23:16:50 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create [Sat Jun 8 23:16:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 23:16:59 2013] rmf not generated due to insufficient counts [Sat Jun 8 23:20:32 2013] Updating aperture counts using extracted products [Sat Jun 8 23:20:32 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_src.pi.gz = 523.00 [Sat Jun 8 23:20:32 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 2140.00 [Sat Jun 8 23:20:32 2013] Got source and background scale factors 813282.000000, 4252296.000000 [Sat Jun 8 23:20:32 2013] User source parameters: Position = (487.3, 253.2) = 9 59 49.48 2 1 38.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 113.7 +/- 23.9 Background aperture counts = 409.3 Rate = 0.001 +/- 0.0002 [Sat Jun 8 23:20:32 2013] Updating counts from extracted products [Sat Jun 8 23:20:32 2013] Set source signif. to 113.71/20.23 = 5.62 [Sat Jun 8 23:20:36 2013] No arf file for this source, not re-computing flux [Sat Jun 8 23:20:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 23:20:49 2013] xmm0672780101/analysis//spectral/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete