[Sat Jun  8 21:42:36 2013] Detection parameters:
  Position = (380.5, 358.0) = 10 0 20.46 2 9 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.8 +/- 23.2
  Background counts = 172.8
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 21:42:37 2013] Off-axis axis estimate = 7.35'
[Sat Jun  8 21:43:13 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:43:13 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Sat Jun  8 21:43:13 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Sat Jun  8 21:43:13 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.10"
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jun  8 21:43:14 2013] Fit fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jun  8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jun  8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun  8 21:43:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:36 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.548883 pixels away
[Sat Jun  8 21:43:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:43:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:43:36 2013] Assessing source extent using major
[Sat Jun  8 21:43:36 2013] Source does appear to be extended
[Sat Jun  8 21:43:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 21:44:04 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:44:04 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Sat Jun  8 21:44:04 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Sat Jun  8 21:44:04 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 10.10"
[Sat Jun  8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24.ximg exists
[Sat Jun  8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24.csv
[Sat Jun  8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Jun  8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24.csv
[Sat Jun  8 21:44:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Jun  8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Jun  8 21:44:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:26 2013] Spatial fit model total counts = 1219.650000, observed total counts = 988.000000
[Sat Jun  8 21:44:26 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 21:44:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:44:26 2013] Assessing source extent using major
[Sat Jun  8 21:44:26 2013] Source does appear to be extended
[Sat Jun  8 21:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:16:49 2013] XMMSAS src. selection expression = ellipse(33055.958466, 31095.070648, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 23:16:49 2013] Not overwriting source region fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  8 23:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (343, 320) - (418, 395)
[Sat Jun  8 23:16:49 2013] XMMSAS bgd. selection expression = annulus(33055.958466, 31095.070648, 1087.500000, 2175.000000, X, Y) && !ellipse(31578.553800, 29058.149400, 307.729609, 307.729609, 0.000000, X, Y)
[Sat Jun  8 23:16:49 2013] Writing fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17.gif
[Sat Jun  8 23:16:51 2013] ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sat Jun  8 23:16:51 2013] Mean detx,y = (787.98, 7141.24) 
[Sat Jun  8 23:16:51 2013] ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Sat Jun  8 23:16:51 2013] ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sat Jun  8 23:16:51 2013] Setting source spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.pi.gz
[Sat Jun  8 23:16:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun  8 23:16:51 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sat Jun  8 23:17:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 23:17:00 2013] rmf not generated due to insufficient counts
[Sat Jun  8 23:20:34 2013] Updating aperture counts using extracted products
[Sat Jun  8 23:20:34 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_src.pi.gz = 784.00
[Sat Jun  8 23:20:34 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 5281.00
[Sat Jun  8 23:20:34 2013] Got source and background scale factors 1172182.000000, 9378023.000000
[Sat Jun  8 23:20:34 2013] User source parameters:
  Position = (380.5, 358.0) = 10 0 20.46 2 9 15.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 123.9 +/- 29.0
  Background aperture counts = 660.1
  Rate = 0.001 +/- 0.0003

[Sat Jun  8 23:20:34 2013] Updating counts from extracted products
[Sat Jun  8 23:20:34 2013] Set source signif. to 123.91/25.69 = 4.82
[Sat Jun  8 23:20:36 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 23:20:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 23:20:49 2013] xmm0672780101/analysis//spectral/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete