[Sat Jun  8 21:42:36 2013] Detection parameters:
  Position = (167.0, 417.1) = 10 1 22.42 2 13 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.8 +/- 25.1
  Background counts = 124.6
  Rate = 0.002 +/- 0.0002

[Sat Jun  8 21:42:37 2013] Off-axis axis estimate = 12.83'
[Sat Jun  8 21:43:13 2013] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:43:13 2013] Initial guess for spatial extent in simple fitting = 12.85"
[Sat Jun  8 21:43:13 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.881
[Sat Jun  8 21:43:13 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 12.85"
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Jun  8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23.csv
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Jun  8 21:43:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23.csv
[Sat Jun  8 21:43:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Jun  8 21:43:14 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jun  8 21:43:14 2013] Fit fullrun_mos1_xmm0672780101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Jun  8 21:43:36 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 11.907025 pixels away
[Sat Jun  8 21:43:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:43:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:43:36 2013] Assessing source extent using major
[Sat Jun  8 21:43:36 2013] Source does appear to be extended
[Sat Jun  8 21:43:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 21:44:04 2013] Using EEF radius (= 12.85 ")to estimate initial spatial extent for simple fitting
[Sat Jun  8 21:44:04 2013] Initial guess for spatial extent in simple fitting = 12.85"
[Sat Jun  8 21:44:04 2013] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.881
[Sat Jun  8 21:44:04 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 12.85"
[Sat Jun  8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21.ximg exists
[Sat Jun  8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21.csv
[Sat Jun  8 21:44:04 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Jun  8 21:44:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21.csv
[Sat Jun  8 21:44:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun  8 21:44:05 2013] fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Jun  8 21:44:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sat Jun  8 21:44:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672780101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  8 21:44:26 2013] Spatial fit model total counts = 1380.530000, observed total counts = 1034.000000
[Sat Jun  8 21:44:26 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  8 21:44:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun  8 21:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  8 21:44:26 2013] Assessing source extent using major
[Sat Jun  8 21:44:26 2013] Source does appear to be extended
[Sat Jun  8 21:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  8 23:16:49 2013] XMMSAS src. selection expression = ellipse(14482.986435, 36235.191437, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  8 23:16:49 2013] Not overwriting source region fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun  8 23:16:49 2013] Extracting stamp from image fullrun_mos1_xmm0672780101_pi300-10000_cl_sm2.00.img.gz, (130, 380) - (205, 455)
[Sat Jun  8 23:16:49 2013] XMMSAS bgd. selection expression = annulus(14482.986435, 36235.191437, 1087.500000, 2175.000000, X, Y)
[Sat Jun  8 23:16:49 2013] Writing fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14.gif
[Sat Jun  8 23:16:50 2013] ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0672780101/products/events/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Jun  8 23:16:50 2013] Mean detx,y = (12427.28, -8175.03) 
[Sat Jun  8 23:16:50 2013] ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.img and ../../xmm0672780101/products/images/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Jun  8 23:16:50 2013] ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.pi and ../../xmm0672780101/products/spectra/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sat Jun  8 23:16:50 2013] Setting source spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.pi.gz
[Sat Jun  8 23:16:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun  8 23:16:50 2013] ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0672780101/products/lightcurves/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Jun  8 23:16:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  8 23:16:59 2013] rmf not generated due to insufficient counts
[Sat Jun  8 23:20:33 2013] Updating aperture counts using extracted products
[Sat Jun  8 23:20:33 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_src.pi.gz = 731.00
[Sat Jun  8 23:20:33 2013] Total counts from fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 3066.00
[Sat Jun  8 23:20:33 2013] Got source and background scale factors 1334024.000000, 6880792.000000
[Sat Jun  8 23:20:33 2013] User source parameters:
  Position = (167.0, 417.1) = 10 1 22.42 2 13 33.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 136.6 +/- 28.1
  Background aperture counts = 594.4
  Rate = 0.001 +/- 0.0002

[Sat Jun  8 23:20:33 2013] Updating counts from extracted products
[Sat Jun  8 23:20:33 2013] Set source signif. to 136.57/24.38 = 5.60
[Sat Jun  8 23:20:36 2013] No arf file for this source, not re-computing flux
[Sat Jun  8 23:20:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  8 23:20:49 2013] xmm0672780101/analysis//spectral/fullrun_mos1_xmm0672780101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete