[Sun Jun 23 18:25:53 2013] Detection parameters:
  Position = (196.9, 227.8) = 18 16 48.26 42 36 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 11.6
  Background counts = 21.4
  Rate = 0.003 +/- 0.0006

[Sun Jun 23 18:25:53 2013] Off-axis axis estimate = 8.97'
[Sun Jun 23 18:59:10 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 18:59:10 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Sun Jun 23 18:59:10 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sun Jun 23 18:59:10 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.91"
[Sun Jun 23 19:28:24 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12.ximg exists
[Sun Jun 23 19:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 19:28:24 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Jun 23 19:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12.csv
[Sun Jun 23 19:28:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 19:28:24 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Jun 23 19:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 19:28:24 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Jun 23 19:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Jun 23 19:28:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672660401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 19:55:20 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.236288 pixels away
[Sun Jun 23 19:55:20 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 19:55:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 19:55:20 2013] Assessing source extent using major
[Sun Jun 23 19:55:20 2013] Source does appear to be extended
[Sun Jun 23 19:55:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 20:31:50 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 20:31:50 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Sun Jun 23 20:31:50 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.994
[Sun Jun 23 20:31:50 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 10.91"
[Sun Jun 23 21:01:51 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_src12.ximg exists
[Sun Jun 23 21:01:51 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Jun 23 21:01:51 2013] Fit fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Jun 23 21:01:51 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Jun 23 21:01:51 2013] fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Jun 23 21:01:51 2013] Fit fullrun_mos1_xmm0672660401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Jun 23 21:27:47 2013] Spatial fit model total counts = 191.665000, observed total counts = 180.000000
[Sun Jun 23 21:27:47 2013] Offset between fit and detection position for source 19 = 0.268759 pixels
[Sun Jun 23 21:27:47 2013] 191.413500 total counts/ 145.619000 bgd. counts: snr = 3.794935
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.268759 pixels
  Position = (196.7, 227.6) = 18 16 48.34 42 35 59.4
  Extent = 5.5 (3.8-7.6)", rotation angle = 0
  Source counts = 45.8 +/- 13.8
  Background counts = 145.6
  Rate = 0.002 +/- 0.0005
[Sun Jun 23 21:27:48 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 21:27:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 21:27:48 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 21:27:48 2013] Source does appear to be extended
[Sun Jun 23 21:27:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 22:30:11 2013] XMMSAS src. selection expression = ellipse(17060.351800, 19751.075800, 328.909209, 328.909209, 0.000000, X, Y)
[Sun Jun 23 22:30:11 2013] Writing source region out to fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_src.reg
[Sun Jun 23 22:30:11 2013] Extracting stamp from image fullrun_mos1_xmm0672660401_pi300-10000_cl_sm2.00.img.gz, (178, 209) - (216, 246)
[Sun Jun 23 22:30:11 2013] XMMSAS bgd. selection expression = annulus(17060.351800, 19751.075800, 548.182016, 1096.364032, X, Y) && !ellipse(15982.565567, 21072.366913, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 22:30:11 2013] Writing fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19.gif
[Sun Jun 23 22:34:44 2013] Mean detx,y = (1617.51, 9012.04) 
[Sun Jun 23 22:34:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 22:34:52 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 22:34:52 2013] Setting source spectrum file to fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Jun 23 22:34:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Jun 23 22:45:14 2013] Not generating rmf since there are only 45 counts
[Sun Jun 23 22:45:14 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:57:47 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:57:47 2013] Total counts from fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 75.00
[Sun Jun 23 22:57:47 2013] Total counts from fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_bgd.pi.gz = 182.00
[Sun Jun 23 22:57:47 2013] Got source and background scale factors 336000.000000, 2451336.000000
[Sun Jun 23 22:57:47 2013] User source parameters:
  Position = (196.7, 227.6) = 18 16 48.34 42 35 59.4
  Extent = 5.5 (3.8-7.6)", rotation angle = 0
  Source aperture counts = 50.1 +/- 9.7
  Background aperture counts = 24.9
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 22:57:49 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:57:49 2013] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19.arf
[Sun Jun 23 22:57:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:57:49 2013] Updating source flux to 3.4e-14
[Sun Jun 23 22:57:54 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 22:57:56 2013] xmm0672660401/analysis//spectral/fullrun_mos1_xmm0672660401_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete