[Tue May 7 00:54:08 2013] Detection parameters: Position = (237.9, 342.2) = 11 32 38.54 -30 18 20.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 123.7 +/- 14.6 Background counts = 34.1 Rate = 0.006 +/- 0.0007 [Tue May 7 00:54:08 2013] Off-axis axis estimate = 5.42' [Tue May 7 00:56:05 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting [Tue May 7 00:56:05 2013] Initial guess for spatial extent in simple fitting = 9.14" [Tue May 7 00:56:05 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.628 [Tue May 7 00:56:05 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.14" [Tue May 7 01:48:00 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18.ximg exists [Tue May 7 01:48:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18.csv [Tue May 7 01:48:00 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18_1.ximg exists [Tue May 7 01:48:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18.csv [Tue May 7 01:48:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 01:48:00 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Tue May 7 01:48:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18.csv [Tue May 7 01:48:00 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Tue May 7 01:48:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18.csv [Tue May 7 01:48:00 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 02:47:29 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 11.297600 pixels away [Tue May 7 02:47:29 2013] Vigneting correction estimate = 1.000000 [Tue May 7 02:47:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 02:47:29 2013] Assessing source extent using major [Tue May 7 02:47:29 2013] Source does appear to be extended [Tue May 7 02:47:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 02:47:43 2013] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting [Tue May 7 02:47:43 2013] Initial guess for spatial extent in simple fitting = 9.14" [Tue May 7 02:47:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.628 [Tue May 7 02:47:43 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 9.14" [Tue May 7 03:32:57 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18.ximg exists [Tue May 7 03:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18.csv [Tue May 7 03:32:57 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18_1.ximg exists [Tue May 7 03:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18.csv [Tue May 7 03:32:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 03:32:57 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Tue May 7 03:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18.csv [Tue May 7 03:32:57 2013] fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Tue May 7 03:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18.csv [Tue May 7 03:32:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 04:19:39 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.574344 pixels away [Tue May 7 04:19:40 2013] Vigneting correction estimate = 1.000000 [Tue May 7 04:19:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 04:19:40 2013] Assessing source extent using major [Tue May 7 04:19:40 2013] Source does appear to be extended [Tue May 7 04:19:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 7 04:19:57 2013] XMMSAS src. selection expression = ellipse(20644.681519, 29721.300079, 652.500000, 652.500000, 0.000000, X, Y) [Tue May 7 04:19:57 2013] Writing source region out to fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_src.reg [Tue May 7 04:19:57 2013] Extracting stamp from image fullrun_pn_xmm0672500301_pi300-10000_cl_sm2.00.img.gz, (200, 305) - (275, 380) [Tue May 7 04:19:57 2013] XMMSAS bgd. selection expression = annulus(20644.681519, 29721.300079, 1087.500000, 2175.000000, X, Y) && !ellipse(20927.086400, 28069.266600, 373.327211, 373.327211, 0.000000, X, Y) [Tue May 7 04:19:57 2013] Writing fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19.gif [Tue May 7 04:31:10 2013] Mean detx,y = (-3199.00, -4711.37) [Tue May 7 04:31:12 2013] Setting backscal keywords in source and bgd. spectrum [Tue May 7 04:31:32 2013] Binned source spectrum to 10 counts/bin [Tue May 7 04:31:32 2013] Setting source spectrum file to fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Tue May 7 04:31:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_bgd.pi.gz [Tue May 7 04:52:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue May 7 04:52:09 2013] rmf not generated due to insufficient counts [Tue May 7 05:19:38 2013] Updating aperture counts using extracted products [Tue May 7 05:19:38 2013] Total counts from fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 254.00 [Tue May 7 05:19:38 2013] Total counts from fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 1404.00 [Tue May 7 05:19:38 2013] Got source and background scale factors 914529.000000, 8761163.000000 [Tue May 7 05:19:38 2013] User source parameters: Position = (237.9, 342.2) = 11 32 38.54 -30 18 20.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 107.4 +/- 17.0 Background aperture counts = 146.6 Rate = 0.006 +/- 0.0009 [Tue May 7 05:19:38 2013] Updating counts from extracted products [Tue May 7 05:19:38 2013] Set source signif. to 107.44/12.11 = 8.88 [Tue May 7 05:19:43 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 05:19:43 2013] Using photon index=1.80, rate=0.00554, arf fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19.arf [Tue May 7 05:19:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 7 05:19:43 2013] Updating source flux to 2.7e-14 [Tue May 7 05:19:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue May 7 05:19:56 2013] xmm0672500301/analysis//spectral/fullrun_pn_xmm0672500301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete