[Tue May  7 00:54:27 2013] Detection parameters:
  Position = (403.9, 309.3) = 11 31 42.74 -30 20 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.6 +/- 27.4
  Background counts = 9.6
  Rate = 0.01 +/- 0.001

[Tue May  7 00:54:29 2013] Off-axis axis estimate = 7.69'
[Tue May  7 01:48:01 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Tue May  7 01:48:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  7 01:48:01 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Tue May  7 01:48:01 2013] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.550
[Tue May  7 01:48:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 10.27"
[Tue May  7 02:09:27 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1.ximg exists
[Tue May  7 02:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1.csv
[Tue May  7 02:09:27 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May  7 02:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1.csv
[Tue May  7 02:09:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 02:09:27 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May  7 02:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May  7 02:09:27 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May  7 02:09:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May  7 02:09:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672500301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 02:47:31 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.556204 pixels away
[Tue May  7 02:47:31 2013] Vigneting correction estimate = 1.000000
[Tue May  7 02:47:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 02:47:31 2013] Assessing source extent using major
[Tue May  7 02:47:31 2013] Source does appear to be extended
[Tue May  7 02:47:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 03:32:57 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Tue May  7 03:32:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May  7 03:32:57 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Tue May  7 03:32:57 2013] source mask rpix=2.4, npix_max = 32, mask sum = 18, frac = 0.550
[Tue May  7 03:32:57 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.27"
[Tue May  7 03:53:23 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1.ximg exists
[Tue May  7 03:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1.csv
[Tue May  7 03:53:23 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May  7 03:53:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1.csv
[Tue May  7 03:53:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 03:53:24 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May  7 03:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  7 03:53:24 2013] fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May  7 03:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May  7 03:53:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672500301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 04:19:43 2013] Spatial fit model total counts = 510.139000, observed total counts = 386.000000
[Tue May  7 04:19:43 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 04:19:43 2013] Vigneting correction estimate = 1.000000
[Tue May  7 04:19:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 04:19:43 2013] Assessing source extent using major
[Tue May  7 04:19:43 2013] Source does appear to be extended
[Tue May  7 04:19:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 04:59:57 2013] XMMSAS src. selection expression = ellipse(35092.811981, 26864.687683, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  7 04:59:57 2013] Writing source region out to fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_src.reg
[Tue May  7 04:59:57 2013] Extracting stamp from image fullrun_mos1_xmm0672500301_pi300-10000_cl_sm2.00.img.gz, (366, 272) - (441, 347)
[Tue May  7 04:59:57 2013] XMMSAS bgd. selection expression = annulus(35092.811981, 26864.687683, 1087.500000, 2175.000000, X, Y) && !ellipse(37889.699493, 29611.650024, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  7 04:59:57 2013] Writing fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1.gif
[Tue May  7 04:59:59 2013] Mean detx,y = (-6012.82, 6611.76) 
[Tue May  7 04:59:59 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May  7 05:00:17 2013] Binned source spectrum to 10 counts/bin
[Tue May  7 05:00:17 2013] Setting source spectrum file to fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May  7 05:00:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May  7 05:04:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  7 05:04:14 2013] rmf not generated due to insufficient counts
[Tue May  7 05:19:43 2013] Updating aperture counts using extracted products
[Tue May  7 05:19:43 2013] Total counts from fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 295.00
[Tue May  7 05:19:43 2013] Total counts from fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 420.00
[Tue May  7 05:19:43 2013] Got source and background scale factors 976898.000000, 7907022.000000
[Tue May  7 05:19:43 2013] User source parameters:
  Position = (403.9, 309.3) = 11 31 42.74 -30 20 53.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 243.1 +/- 18.2
  Background aperture counts = 51.9
  Rate = 0.01 +/- 0.0008

[Tue May  7 05:19:43 2013] Updating counts from extracted products
[Tue May  7 05:19:43 2013] Set source signif. to 243.11/7.20 = 33.75
[Tue May  7 05:19:45 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 05:19:45 2013] Using photon index=1.80, rate=0.0113, arf fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1.arf
[Tue May  7 05:19:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  7 05:19:45 2013] Updating source flux to 3.8e-13
[Tue May  7 05:19:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May  7 05:19:52 2013] xmm0672500301/analysis//spectral/fullrun_mos1_xmm0672500301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete