[Sun May 12 01:29:08 2013] Detection parameters:
  Position = (281.9, 272.2) = 7 17 34.65 37 44 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2286.3 +/- 62.8
  Background counts = 180.6
  Rate = 0.05 +/- 0.001

[Sun May 12 01:29:14 2013] Off-axis axis estimate = 2.25'
[Sun May 12 01:34:02 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:34:02 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Sun May 12 01:34:02 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.800
[Sun May 12 01:34:02 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.55"
[Sun May 12 04:33:56 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 12 04:33:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7.csv
[Sun May 12 04:33:56 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 12 04:33:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7.csv
[Sun May 12 04:33:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 04:33:58 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 12 04:33:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 12 04:33:58 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 12 04:33:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun May 12 04:33:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 07:51:55 2013] Spatial fit model total counts = 10307.700000, observed total counts = 8921.000000
[Sun May 12 07:51:55 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 07:51:55 2013] Spatial fit model total counts = 5572.000000, observed total counts = 3430.000000
[Sun May 12 07:51:55 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 07:51:56 2013] Vigneting correction estimate = 1.000000
[Sun May 12 07:51:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 07:51:56 2013] Assessing source extent using major
[Sun May 12 07:51:56 2013] Source does appear to be extended
[Sun May 12 07:51:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 07:52:33 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sun May 12 07:52:33 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Sun May 12 07:52:33 2013] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.800
[Sun May 12 07:52:33 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.55"
[Sun May 12 09:58:25 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 12 09:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7.csv
[Sun May 12 09:58:25 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 12 09:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7.csv
[Sun May 12 09:58:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 09:58:26 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 12 09:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 09:58:26 2013] fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 12 09:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 09:58:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 13:01:09 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.233429 pixels away
[Sun May 12 13:01:09 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.467217 pixels away
[Sun May 12 13:01:09 2013] Vigneting correction estimate = 1.000000
[Sun May 12 13:01:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 13:01:09 2013] Assessing source extent using major
[Sun May 12 13:01:09 2013] Source does appear to be extended
[Sun May 12 13:01:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 13:01:45 2013] Counts = 2286.264404, rescaling region sizes by 2.000000
[Sun May 12 13:01:45 2013] XMMSAS src. selection expression = ellipse(24477.311890, 23632.749725, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 12 13:01:45 2013] Writing source region out to fullrun_pn_xmm0672420301_pi300-10000_pass1_cl_src7_src.reg
[Sun May 12 13:01:45 2013] Extracting stamp from image fullrun_pn_xmm0672420301_pi300-10000_cl_sm2.00.img.gz, (207, 197) - (357, 347)
[Sun May 12 13:01:45 2013] XMMSAS bgd. selection expression = annulus(24477.311890, 23632.749725, 4350.000000, 8700.000000, X, Y) && !ellipse(17684.939060, 32141.874000, 639.912818, 461.762413, 303.237390, X, Y) && !ellipse(26530.052000, 25935.970000, 1072.168031, 1072.168031, 0.000000, X, Y) && !ellipse(25339.427800, 24328.987800, 1141.872033, 936.768027, 125.356100, X, Y) && !ellipse(19758.464600, 23171.141022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24888.828156, 22733.257660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28617.455719, 20752.267288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.550079, 31036.548492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15989.935928, 29176.490723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20517.744568, 28633.162872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17992.708160, 26449.154358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26241.321320, 25348.543823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27444.564667, 25183.809875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27587.747742, 24496.590057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.582947, 22862.191193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.423767, 22633.439178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30126.096360, 20935.250400, 409.781612, 344.097610, 88.970460, X, Y) && !ellipse(23968.008240, 20730.266388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33213.499939, 17173.586487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29642.072200, 31421.550800, 392.726411, 392.726411, 0.000000, X, Y) && !ellipse(28844.569580, 31190.680908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23233.194400, 23791.042800, 901.240026, 238.677607, 355.594940, X, Y) && !ellipse(19054.484909, 21719.599335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20063.467728, 20309.704437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29941.155090, 18774.611633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.349701, 17693.779739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18452.074692, 17346.646606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21303.877200, 16875.391800, 372.432252, 372.432252, 0.000000, X, Y) && !ellipse(19842.732574, 16075.380081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32271.107910, 31405.863068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18187.550140, 28502.354889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14932.269165, 28300.554077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17709.472290, 27352.111237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25306.666046, 26638.768585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23647.023800, 25837.081200, 757.358422, 296.877609, 92.894956, X, Y) && !ellipse(26743.782959, 23015.933319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31762.977783, 21952.491867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30440.592651, 21518.891068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17167.219727, 21472.104141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21184.053375, 21244.053055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23287.840179, 18794.744720, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 13:01:45 2013] Writing fullrun_pn_xmm0672420301_pi300-10000_pass1_cl_src7.gif
[Sun May 12 13:10:03 2013] Mean detx,y = (351.42, -445.82) 
[Sun May 12 13:10:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 13:12:04 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 13:12:05 2013] Setting source spectrum file to fullrun_pn_xmm0672420301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 12 13:12:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672420301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 12 14:14:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 12 14:14:59 2013] rmf not generated due to insufficient counts