[Sun May 12 01:30:32 2013] Detection parameters:
  Position = (291.9, 280.0) = 7 17 30.99 37 45 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1969.7 +/- 57.0
  Background counts = 83.1
  Rate = 0.03 +/- 0.0009

[Sun May 12 01:30:34 2013] Off-axis axis estimate = 1.42'
[Sun May 12 06:10:53 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun May 12 06:10:53 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Sun May 12 06:10:53 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Sun May 12 06:10:53 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.14"
[Sun May 12 07:51:36 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 07:51:36 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 07:51:36 2013] Fit fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May 12 07:51:37 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 07:51:37 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 07:51:37 2013] Fit fullrun_mos2_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 12 07:52:15 2013] Spatial fit model total counts = 6400.660000, observed total counts = 6397.000000
[Sun May 12 07:52:15 2013] Offset between fit and detection position for source 1 = 0.156036 pixels
[Sun May 12 07:52:15 2013] 6331.750000 total counts/ 4701.760000 bgd. counts: snr = 23.771397
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.156036 pixels
  Position = (292.0, 280.1) = 7 17 30.95 37 45 31.9
  Extent = 14.3 (14.3-28.6)" x 12.4 (11.0-13.9)", rotation angle = 124 (104-148) degrees
  Source counts = 1630.0 +/- 79.6
  Background counts = 4701.8
  Rate = 0.03 +/- 0.001
[Sun May 12 07:52:15 2013] Vigneting correction estimate = 1.000000
[Sun May 12 07:52:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 07:52:15 2013] Assessing source extent using major axis lower bound
[Sun May 12 07:52:15 2013] Source does appear to be extended
[Sun May 12 07:52:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sun May 12 11:32:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 11:32:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 11:32:58 2013] Initial guess for spatial extent in simple fitting = 13.35"
[Sun May 12 11:32:58 2013] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.099
[Sun May 12 11:32:58 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.35"
[Sun May 12 13:00:52 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 13:00:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1.csv
[Sun May 12 13:00:52 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 13:00:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1.csv
[Sun May 12 13:00:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 13:00:53 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 13:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 13:00:53 2013] fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 13:00:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 12 13:00:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 13:01:27 2013] Warning, spatial fit 1 centroid is now closest to src. 45
[Sun May 12 13:01:27 2013] Vigneting correction estimate = 1.000000
[Sun May 12 13:01:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 13:01:27 2013] Assessing source extent using major axis lower bound
[Sun May 12 13:01:27 2013] Source does appear to be extended
[Sun May 12 13:01:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Sun May 12 17:03:47 2013] Counts = 1629.990000, rescaling region sizes by 2.000000
[Sun May 12 17:03:47 2013] XMMSAS src. selection expression = ellipse(25355.648654, 24318.606400, 1713.324049, 1490.772043, 123.682260, X, Y)
[Sun May 12 17:03:47 2013] Writing source region out to fullrun_mos2_xmm0672420301_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 17:03:47 2013] Extracting stamp from image fullrun_mos2_xmm0672420301_pi300-10000_cl_sm2.00.img.gz, (194, 182) - (390, 379)
[Sun May 12 17:03:47 2013] XMMSAS bgd. selection expression = annulus(25355.648654, 24318.606400, 5711.080164, 11422.160329, X, Y) && !ellipse(22558.880000, 35827.807000, 699.892820, 424.780012, 346.100700, X, Y) && !ellipse(26697.688995, 34084.447784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19740.678000, 23176.817400, 467.080013, 361.344010, 44.905313, X, Y) && !ellipse(24853.584400, 22789.774000, 1236.320036, 607.192817, 236.005000, X, Y) && !ellipse(24133.275848, 23612.436096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.378000, 25173.964000, 632.498418, 632.498418, 0.000000, X, Y) && !ellipse(28607.768000, 20727.330600, 428.050412, 428.050412, 0.000000, X, Y) && !ellipse(26782.662000, 26385.200000, 283.935208, 283.935208, 0.000000, X, Y) && !ellipse(15923.208405, 29017.220825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17643.633000, 32142.156000, 735.534421, 434.561613, 298.218088, X, Y) && !ellipse(30162.018600, 20932.421200, 444.514413, 289.669608, 340.600700, X, Y) && !ellipse(26423.387400, 35776.154420, 407.261612, 286.256808, 15.710900, X, Y) && !ellipse(14355.441483, 15865.507980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20492.989480, 28629.781000, 424.019212, 258.248807, 57.424843, X, Y) && !ellipse(23962.588000, 20720.657400, 424.364012, 247.516807, 1.085111, X, Y) && !ellipse(19033.031000, 21730.383400, 434.187212, 265.128008, 29.174435, X, Y) && !ellipse(25411.481800, 34833.568800, 487.556814, 336.806410, 353.067750, X, Y) && !ellipse(18454.742996, 17336.780518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27217.324000, 24384.780000, 1204.288035, 1204.288035, 0.000000, X, Y) && !ellipse(14904.210815, 33700.668610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24166.482300, 24914.690796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23085.213040, 23846.411000, 451.176013, 451.176013, 0.000000, X, Y) && !ellipse(26894.360291, 23972.221771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34140.383942, 24214.904724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20134.958374, 20304.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22602.354095, 34581.039154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17970.643539, 26426.852112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26076.005920, 25963.868103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21261.671829, 16861.497086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18142.113297, 28550.633942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29940.484600, 18819.306800, 469.097613, 469.097613, 0.000000, X, Y) && !ellipse(26544.517700, 25967.014313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35819.797800, 32967.247600, 605.610417, 240.400807, 62.795200, X, Y) && !ellipse(33235.058777, 17178.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36487.960846, 17599.066879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16415.250381, 35714.694183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.778534, 21534.259705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26585.429047, 25606.501160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16442.664886, 24546.642670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35858.843689, 19238.904572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.780000, 23472.128000, 1162.944033, 1162.944033, 0.000000, X, Y) && !ellipse(30226.534600, 13295.021200, 545.572816, 305.012809, 359.537121, X, Y) && !ellipse(23377.357147, 25306.796143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35714.988892, 27167.138000, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 17:03:47 2013] Writing fullrun_mos2_xmm0672420301_pi300-10000_pass1_cl_src1.gif
[Sun May 12 17:03:55 2013] Mean detx,y = (404.07, -54.95) 
[Sun May 12 17:03:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 17:08:12 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 17:08:12 2013] Setting source spectrum file to fullrun_mos2_xmm0672420301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 12 17:08:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672420301_pi300-10000_pass1_cl_src1_bgd.pi.gz