[Sun May 12 01:29:49 2013] Detection parameters:
  Position = (316.0, 356.5) = 7 17 22.14 37 51 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.4 +/- 12.8
  Background counts = 43.9
  Rate = 0.001 +/- 0.0002

[Sun May 12 01:29:52 2013] Off-axis axis estimate = 4.40'
[Sun May 12 04:33:59 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun May 12 04:33:59 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Sun May 12 04:33:59 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Sun May 12 04:33:59 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 8.63"
[Sun May 12 06:10:52 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48.ximg exists
[Sun May 12 06:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48.csv
[Sun May 12 06:10:52 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun May 12 06:10:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48.csv
[Sun May 12 06:10:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 06:10:53 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun May 12 06:10:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 12 06:10:53 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun May 12 06:10:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun May 12 06:10:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420301_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 07:52:05 2013] Spatial fit model total counts = -192.380000, observed total counts = 236.000000
[Sun May 12 07:52:05 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 07:52:06 2013] Vigneting correction estimate = 1.000000
[Sun May 12 07:52:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 07:52:06 2013] Assessing source extent using major
[Sun May 12 07:52:06 2013] Source does appear to be extended
[Sun May 12 07:52:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 09:58:27 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Sun May 12 09:58:27 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Sun May 12 09:58:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.811
[Sun May 12 09:58:27 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 8.63"
[Sun May 12 11:32:57 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44.ximg exists
[Sun May 12 11:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44.csv
[Sun May 12 11:32:57 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44_1.ximg exists
[Sun May 12 11:32:57 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44.csv
[Sun May 12 11:32:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 11:32:58 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sun May 12 11:32:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun May 12 11:32:58 2013] fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sun May 12 11:32:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun May 12 11:32:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420301_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 13:01:19 2013] Spatial fit model total counts = -104.744000, observed total counts = 236.000000
[Sun May 12 13:01:19 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 12 13:01:19 2013] Vigneting correction estimate = 1.000000
[Sun May 12 13:01:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 13:01:19 2013] Assessing source extent using major
[Sun May 12 13:01:19 2013] Source does appear to be extended
[Sun May 12 13:01:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 15:55:15 2013] XMMSAS src. selection expression = ellipse(27442.254791, 30968.093872, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 12 15:55:15 2013] Writing source region out to fullrun_mos1_xmm0672420301_pi300-10000_pass1_cl_src19_src.reg
[Sun May 12 15:55:15 2013] Extracting stamp from image fullrun_mos1_xmm0672420301_pi300-10000_cl_sm2.00.img.gz, (278, 319) - (353, 394)
[Sun May 12 15:55:15 2013] XMMSAS bgd. selection expression = annulus(27442.254791, 30968.093872, 1087.500000, 2175.000000, X, Y)
[Sun May 12 15:55:15 2013] Writing fullrun_mos1_xmm0672420301_pi300-10000_pass1_cl_src19.gif
[Sun May 12 16:19:59 2013] Mean detx,y = (-6138.61, -3474.96) 
[Sun May 12 16:20:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 16:20:18 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 16:20:18 2013] Setting source spectrum file to fullrun_mos1_xmm0672420301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun May 12 16:20:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672420301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun May 12 17:02:58 2013] Not generating rmf since there are only 80 counts
[Sun May 12 17:02:58 2013] rmf not generated due to insufficient counts