[Sat May  4 06:31:15 2013] Detection parameters:
  Position = (239.2, 98.3) = 7 17 50.35 37 32 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.2 +/- 14.2
  Background counts = 37.1
  Rate = 0.001 +/- 0.0002

[Sat May  4 06:31:16 2013] Off-axis axis estimate = 15.13'
[Sat May  4 08:18:49 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Sat May  4 08:18:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 08:18:49 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Sat May  4 08:18:49 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.013
[Sat May  4 08:18:49 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 14.00"
[Sat May  4 09:58:55 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_src48.ximg exists
[Sat May  4 09:58:55 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_src48_1.ximg exists
[Sat May  4 09:58:55 2013] Fit fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_src48 appears to have run properly
[Sat May  4 09:58:56 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sat May  4 09:58:56 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sat May  4 09:58:56 2013] Fit fullrun_mos1_xmm0672420201_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Sat May  4 11:47:25 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.546184 pixels away
[Sat May  4 11:47:25 2013] Vigneting correction estimate = 1.000000
[Sat May  4 11:47:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 11:47:25 2013] Assessing source extent using major
[Sat May  4 11:47:25 2013] Source does appear to be extended
[Sat May  4 11:47:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 13:13:44 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Sat May  4 13:13:44 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Sat May  4 13:13:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.013
[Sat May  4 13:13:44 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 14.00"
[Sat May  4 14:48:35 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46.ximg exists
[Sat May  4 14:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46.csv
[Sat May  4 14:48:35 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46_1.ximg exists
[Sat May  4 14:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46.csv
[Sat May  4 14:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 14:48:35 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sat May  4 14:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sat May  4 14:48:35 2013] fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sat May  4 14:48:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sat May  4 14:48:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 16:06:19 2013] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 17.890329 pixels away
[Sat May  4 16:06:19 2013] Vigneting correction estimate = 1.000000
[Sat May  4 16:06:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 16:06:19 2013] Assessing source extent using major
[Sat May  4 16:06:19 2013] Source does appear to be extended
[Sat May  4 16:06:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 18:01:48 2013] XMMSAS src. selection expression = ellipse(20758.618118, 8502.779861, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 18:01:48 2013] Writing source region out to fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_src.reg
[Sat May  4 18:01:48 2013] Extracting stamp from image fullrun_mos1_xmm0672420201_pi300-10000_cl_sm2.00.img.gz, (202, 61) - (277, 136)
[Sat May  4 18:01:48 2013] XMMSAS bgd. selection expression = annulus(20758.618118, 8502.779861, 1087.500000, 2175.000000, X, Y) && !ellipse(17994.344986, 10514.556625, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 18:01:48 2013] Writing fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12.gif
[Sat May  4 18:16:18 2013] Mean detx,y = (15278.08, 5748.73) 
[Sat May  4 18:16:18 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 18:16:29 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 18:16:29 2013] Setting source spectrum file to fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat May  4 18:16:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat May  4 19:09:08 2013] Not generating rmf since there are only 86 counts
[Sat May  4 19:09:08 2013] rmf not generated due to insufficient counts
[Sat May  4 20:16:15 2013] Updating aperture counts using extracted products
[Sat May  4 20:16:15 2013] Total counts from fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 206.00
[Sat May  4 20:16:15 2013] Total counts from fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_bgd.pi.gz = 587.00
[Sat May  4 20:16:15 2013] Got source and background scale factors 1154028.000000, 4619019.000000
[Sat May  4 20:16:15 2013] User source parameters:
  Position = (239.2, 98.3) = 7 17 50.35 37 32 22.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 59.3 +/- 15.4
  Background aperture counts = 146.7
  Rate = 0.0009 +/- 0.0002

[Sat May  4 20:16:15 2013] Updating counts from extracted products
[Sat May  4 20:16:15 2013] Set source signif. to 59.34/12.11 = 4.90
[Sat May  4 20:16:17 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 20:16:17 2013] Using photon index=1.80, rate=0.000908, arf fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12.arf
[Sat May  4 20:16:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 20:16:17 2013] Updating source flux to 2.5e-14
[Sat May  4 20:16:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 20:16:34 2013] xmm0672420201/analysis//spectral/fullrun_mos1_xmm0672420201_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete