[Tue Jul 16 14:11:39 2013] Detection parameters:
  Position = (281.5, 256.3) = 7 17 35.00 37 43 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 322.9 +/- 26.1
  Background counts = 115.6
  Rate = 0.009 +/- 0.0008

[Tue Jul 16 14:11:39 2013] Off-axis axis estimate = 3.29'
[Tue Jul 16 14:13:26 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 14:13:26 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Tue Jul 16 14:13:26 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.856
[Tue Jul 16 14:13:26 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 8.07"
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63.csv
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63.csv
[Tue Jul 16 15:46:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue Jul 16 15:46:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:43 2013] Warning, spatial fit 63 centroid is now closest to src. 74
[Tue Jul 16 16:33:43 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:43 2013] Assessing source extent using major
[Tue Jul 16 16:33:43 2013] Source does appear to be extended
[Tue Jul 16 16:33:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 16:33:43 2013] Source is confused with source 15
[Tue Jul 16 16:34:01 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 16:34:01 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Tue Jul 16 16:34:01 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.856
[Tue Jul 16 16:34:01 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 8.07"
[Tue Jul 16 17:57:19 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58.ximg exists
[Tue Jul 16 17:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58.csv
[Tue Jul 16 17:57:19 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue Jul 16 17:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58.csv
[Tue Jul 16 17:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 17:57:20 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue Jul 16 17:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Tue Jul 16 17:57:20 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue Jul 16 17:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Tue Jul 16 17:57:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 18:49:53 2013] Source 67 is offset by -6.924674 and 6.739371 pixels which is larger than
2 X fitted extent = 0.928083 x 0.928083, not incorporating fit results
[Tue Jul 16 18:49:53 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 18:49:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 18:49:53 2013] Assessing source extent using major
[Tue Jul 16 18:49:53 2013] Source does appear to be extended
[Tue Jul 16 18:49:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 18:50:12 2013] XMMSAS src. selection expression = ellipse(24441.997345, 22250.881317, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 16 18:50:12 2013] Writing source region out to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_src.reg
[Tue Jul 16 18:50:12 2013] Extracting stamp from image fullrun_pn_xmm0672420101_pi300-10000_cl_sm2.00.img.gz, (244, 219) - (319, 294)
[Tue Jul 16 18:50:12 2013] XMMSAS bgd. selection expression = annulus(24441.997345, 22250.881317, 1087.500000, 2175.000000, X, Y) && !ellipse(25372.340780, 24271.588600, 1147.120033, 904.184026, 125.782200, X, Y) && !ellipse(24396.559174, 23572.172577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24189.482000, 22452.614000, 1342.984039, 1342.984039, 0.000000, X, Y) && !ellipse(25018.916626, 22656.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24000.103200, 20678.083800, 452.320813, 340.028810, 339.224800, X, Y) && !ellipse(27465.868622, 25194.666290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22777.224945, 23294.480408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.567719, 22967.731262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27192.190857, 22985.604919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.316000, 21507.220000, 1343.312039, 1343.312039, 0.000000, X, Y) && !ellipse(21894.304000, 21966.184000, 1462.232042, 382.558411, 321.892600, X, Y) && !ellipse(23799.886475, 21700.456573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21064.476000, 20622.384000, 1462.232042, 1462.232042, 0.000000, X, Y)
[Tue Jul 16 18:50:12 2013] Writing fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67.gif
[Tue Jul 16 19:23:25 2013] Mean detx,y = (860.65, -1846.39) 
[Tue Jul 16 19:23:27 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 16 19:23:35 2013] Binned source spectrum to 10 counts/bin
[Tue Jul 16 19:23:35 2013] Setting source spectrum file to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Tue Jul 16 19:23:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Tue Jul 16 21:12:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 16 21:12:44 2013] rmf not generated due to insufficient counts
[Tue Jul 16 22:41:12 2013] Updating aperture counts using extracted products
[Tue Jul 16 22:41:12 2013] Total counts from fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 2157.00
[Tue Jul 16 22:41:12 2013] Total counts from fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_bgd.pi.gz = 1750.00
[Tue Jul 16 22:41:12 2013] Got source and background scale factors 1037652.000000, 2841337.000000
[Tue Jul 16 22:41:12 2013] User source parameters:
  Position = (281.5, 256.3) = 7 17 35.00 37 43 52.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1517.9 +/- 47.5
  Background aperture counts = 639.1
  Rate = 0.03 +/- 0.001

[Tue Jul 16 22:41:12 2013] Updating counts from extracted products
[Tue Jul 16 22:41:12 2013] Set source signif. to 1517.90/25.28 = 60.04
[Tue Jul 16 22:41:16 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul 16 22:41:16 2013] Using photon index=1.80, rate=0.0307, arf fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67.arf
[Tue Jul 16 22:41:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 16 22:41:16 2013] Updating source flux to 1.1e-13
[Tue Jul 16 22:41:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul 16 22:41:37 2013] xmm0672420101/analysis//spectral/fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete