[Tue Jul 16 14:11:39 2013] Detection parameters:
  Position = (262.4, 268.3) = 7 17 42.02 37 44 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.7 +/- 15.0
  Background counts = 114.0
  Rate = 0.002 +/- 0.0004

[Tue Jul 16 14:11:39 2013] Off-axis axis estimate = 3.41'
[Tue Jul 16 14:13:26 2013] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 14:13:26 2013] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jul 16 14:13:26 2013] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.935
[Tue Jul 16 14:13:26 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.13"
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59.csv
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59_1.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59.csv
[Tue Jul 16 15:46:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Tue Jul 16 15:46:36 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Tue Jul 16 15:46:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59.csv
[Tue Jul 16 15:46:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:43 2013] Source 63 is offset by -6.167093 and -6.028018 pixels which is larger than
2 X fitted extent = 6.773288 x 3.819904, not incorporating fit results
[Tue Jul 16 16:33:43 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:43 2013] Assessing source extent using major
[Tue Jul 16 16:33:43 2013] Source does appear to be extended
[Tue Jul 16 16:33:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 16:34:01 2013] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 16:34:01 2013] Initial guess for spatial extent in simple fitting = 8.13"
[Tue Jul 16 16:34:01 2013] source mask rpix=1.9, npix_max = 22, mask sum = 21, frac = 0.935
[Tue Jul 16 16:34:01 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 8.13"
[Tue Jul 16 17:57:19 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jul 16 17:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54.csv
[Tue Jul 16 17:57:19 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jul 16 17:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54.csv
[Tue Jul 16 17:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 17:57:20 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jul 16 17:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Jul 16 17:57:20 2013] fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jul 16 17:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Jul 16 17:57:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 18:49:53 2013] Source 63 is offset by 5.594103 and 6.742579 pixels which is larger than
2 X fitted extent = 1.454322 x 1.454322, not incorporating fit results
[Tue Jul 16 18:49:53 2013] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 14.542390 pixels away
[Tue Jul 16 18:49:53 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 18:49:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 18:49:53 2013] Assessing source extent using major
[Tue Jul 16 18:49:53 2013] Source does appear to be extended
[Tue Jul 16 18:49:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 18:50:12 2013] XMMSAS src. selection expression = ellipse(22777.224945, 23294.480408, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 16 18:50:12 2013] Writing source region out to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_src.reg
[Tue Jul 16 18:50:12 2013] Extracting stamp from image fullrun_pn_xmm0672420101_pi300-10000_cl_sm2.00.img.gz, (225, 231) - (300, 306)
[Tue Jul 16 18:50:12 2013] XMMSAS bgd. selection expression = annulus(22777.224945, 23294.480408, 1087.500000, 2175.000000, X, Y) && !ellipse(25372.340780, 24271.588600, 1147.120033, 904.184026, 125.782200, X, Y) && !ellipse(24396.559174, 23572.172577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19790.712585, 23113.946381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24189.482000, 22452.614000, 1342.984039, 1342.984039, 0.000000, X, Y) && !ellipse(25018.916626, 22656.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24000.103200, 20678.083800, 452.320813, 340.028810, 339.224800, X, Y) && !ellipse(24420.669495, 26103.307587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24441.997345, 22250.881317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.316000, 21507.220000, 1343.312039, 1343.312039, 0.000000, X, Y) && !ellipse(21894.304000, 21966.184000, 1462.232042, 382.558411, 321.892600, X, Y) && !ellipse(23799.886475, 21700.456573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21064.476000, 20622.384000, 1462.232042, 1462.232042, 0.000000, X, Y) && !ellipse(20101.967200, 20259.093800, 1270.120037, 1270.120037, 0.000000, X, Y)
[Tue Jul 16 18:50:12 2013] Writing fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63.gif
[Tue Jul 16 19:21:43 2013] Mean detx,y = (2294.69, -586.38) 
[Tue Jul 16 19:21:45 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 16 19:22:00 2013] Binned source spectrum to 10 counts/bin
[Tue Jul 16 19:22:01 2013] Setting source spectrum file to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jul 16 19:22:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Jul 16 21:07:58 2013] Not generating rmf since there are only 83 counts
[Tue Jul 16 21:07:58 2013] rmf not generated due to insufficient counts
[Tue Jul 16 22:41:11 2013] Updating aperture counts using extracted products
[Tue Jul 16 22:41:11 2013] Total counts from fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 1005.00
[Tue Jul 16 22:41:11 2013] Total counts from fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_bgd.pi.gz = 3059.00
[Tue Jul 16 22:41:11 2013] Got source and background scale factors 1091266.000000, 4192999.000000
[Tue Jul 16 22:41:11 2013] User source parameters:
  Position = (262.4, 268.3) = 7 17 42.02 37 44 34.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 208.9 +/- 32.7
  Background aperture counts = 796.1
  Rate = 0.004 +/- 0.0007

[Tue Jul 16 22:41:11 2013] Updating counts from extracted products
[Tue Jul 16 22:41:11 2013] Set source signif. to 208.87/28.22 = 7.40
[Tue Jul 16 22:41:16 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul 16 22:41:16 2013] Using photon index=1.80, rate=0.00422, arf fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63.arf
[Tue Jul 16 22:41:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 16 22:41:16 2013] Updating source flux to 1.3e-14
[Tue Jul 16 22:41:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul 16 22:41:37 2013] xmm0672420101/analysis//spectral/fullrun_pn_xmm0672420101_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete