[Tue Jul 16 14:11:59 2013] Detection parameters:
  Position = (232.0, 233.0) = 7 17 53.16 37 42 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.3 +/- 15.1
  Background counts = 38.3
  Rate = 0.002 +/- 0.0003

[Tue Jul 16 14:11:59 2013] Off-axis axis estimate = 6.76'
[Tue Jul 16 15:46:37 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 15:46:37 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jul 16 15:46:37 2013] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.021
[Tue Jul 16 15:46:37 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 9.81"
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:51 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 12.127948 pixels away
[Tue Jul 16 16:33:51 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:51 2013] Assessing source extent using major
[Tue Jul 16 16:33:51 2013] Source does appear to be extended
[Tue Jul 16 16:33:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 17:57:20 2013] Using EEF radius (= 9.81 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 17:57:20 2013] Initial guess for spatial extent in simple fitting = 9.81"
[Tue Jul 16 17:57:20 2013] source mask rpix=2.3, npix_max = 30, mask sum = 31, frac = 1.021
[Tue Jul 16 17:57:20 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.81"
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jul 16 18:49:39 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src20 appears to have run properly
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jul 16 18:49:39 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Jul 16 18:50:00 2013] Spatial fit model total counts = 411.958000, observed total counts = 432.000000
[Tue Jul 16 18:50:00 2013] Offset between fit and detection position for source 45 = 1.319823 pixels
[Tue Jul 16 18:50:00 2013] 403.326400 total counts/ 49.036400 bgd. counts: snr = 50.594069
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.319823 pixels
  Position = (233.3, 233.2) = 7 17 52.68 37 42 9.8
  Extent = 17.3 (12.7-19.6)", rotation angle = 0
  Source counts = 354.3 +/- 20.1
  Background counts = 49.0
  Rate = 0.006 +/- 0.0003
[Tue Jul 16 18:50:00 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 18:50:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 18:50:00 2013] Assessing source extent using major axis lower bound
[Tue Jul 16 18:50:00 2013] Source does appear to be extended
[Tue Jul 16 18:50:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 21:24:58 2013] XMMSAS src. selection expression = ellipse(20245.710800, 20240.676000, 1038.654030, 1038.654030, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing source region out to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_src.reg
[Tue Jul 16 21:24:58 2013] Extracting stamp from image fullrun_mos1_xmm0672420101_pi300-10000_cl_sm2.00.img.gz, (174, 174) - (293, 293)
[Tue Jul 16 21:24:58 2013] XMMSAS bgd. selection expression = annulus(20245.710800, 20240.676000, 1731.090050, 3462.180100, X, Y) && !ellipse(19784.148800, 23126.412800, 348.135210, 348.135210, 0.000000, X, Y) && !ellipse(24611.769960, 23271.484000, 2464.096071, 1387.744040, 70.661700, X, Y) && !ellipse(24699.300000, 23061.864000, 2497.512072, 1341.328039, 66.633800, X, Y) && !ellipse(23982.609260, 20671.388600, 457.866413, 457.866413, 0.000000, X, Y) && !ellipse(18478.788800, 17273.981000, 426.371212, 273.728808, 11.286602, X, Y) && !ellipse(19113.502228, 21675.014755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19907.503342, 16044.539261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.356000, 23921.540600, 1257.840036, 569.637616, 349.645000, X, Y) && !ellipse(21286.011810, 16827.737061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23270.659485, 23295.977844, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45.gif
[Tue Jul 16 21:36:42 2013] Mean detx,y = (3443.00, 4998.35) 
[Tue Jul 16 21:36:43 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 16 21:36:55 2013] Binned source spectrum to 10 counts/bin
[Tue Jul 16 21:36:55 2013] Setting source spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Jul 16 21:36:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Jul 16 22:41:19 2013] Updating aperture counts using extracted products
[Tue Jul 16 22:41:19 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 679.00
[Tue Jul 16 22:41:19 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 4122.00
[Tue Jul 16 22:41:19 2013] Got source and background scale factors 2738532.000000, 22153889.000000
[Tue Jul 16 22:41:19 2013] User source parameters:
  Position = (233.3, 233.2) = 7 17 52.68 37 42 9.8
  Extent = 17.3 (12.7-19.6)", rotation angle = 0
  Source aperture counts = 169.5 +/- 27.1
  Background aperture counts = 509.5
  Rate = 0.003 +/- 0.0005

[Tue Jul 16 22:41:22 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul 16 22:41:22 2013] Using photon index=1.80, rate=0.00601, arf fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45.arf
[Tue Jul 16 22:41:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 16 22:41:22 2013] Updating source flux to 7.1e-14
[Tue Jul 16 22:41:31 2013] xmm0672420101/analysis//spectral/fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete