[Tue Jul 16 14:11:59 2013] Detection parameters:
  Position = (316.9, 356.4) = 7 17 22.01 37 51 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.1 +/- 13.4
  Background counts = 23.0
  Rate = 0.002 +/- 0.0002

[Tue Jul 16 14:11:59 2013] Off-axis axis estimate = 4.41'
[Tue Jul 16 15:46:37 2013] Using EEF radius (= 8.63 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 15:46:37 2013] Initial guess for spatial extent in simple fitting = 8.63"
[Tue Jul 16 15:46:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.931
[Tue Jul 16 15:46:37 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 8.63"
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:51 2013] Spatial fit model total counts = 351.765000, observed total counts = 339.000000
[Tue Jul 16 16:33:51 2013] Offset between fit and detection position for source 23 = 0.677579 pixels
[Tue Jul 16 16:33:51 2013] Warning, changing simple spatial fit ID from 32 to 27
[Tue Jul 16 16:33:51 2013] 347.768600 total counts/ 315.515000 bgd. counts: snr = 1.815801
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.677579 pixels
  Position = (316.3, 356.1) = 7 17 22.24 37 51 4.7
  Extent = 3.9 (2.2-10.5)" x 3.3 (2.2-8.7)", rotation angle = 0 (360-0) degrees
  Source counts = 32.3 +/- 18.6
  Background counts = 315.5
  Rate = 0.0005 +/- 0.0003
[Tue Jul 16 16:33:51 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:51 2013] Assessing source extent using major axis lower bound
[Tue Jul 16 16:33:51 2013] Source does appear to be extended
[Tue Jul 16 16:33:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.25
[Tue Jul 16 16:33:51 2013] Deleting source due to low Poisson probability 0.8