[Tue Jul 16 14:11:59 2013] Detection parameters:
  Position = (115.6, 356.9) = 7 18 35.95 37 51 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.4 +/- 15.5
  Background counts = 31.7
  Rate = 0.001 +/- 0.0003

[Tue Jul 16 14:11:59 2013] Off-axis axis estimate = 13.92'
[Tue Jul 16 15:46:37 2013] Using EEF radius (= 13.39 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 15:46:37 2013] Initial guess for spatial extent in simple fitting = 13.39"
[Tue Jul 16 15:46:37 2013] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.918
[Tue Jul 16 15:46:37 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 13.39"
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src45.ximg exists
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Jul 16 16:33:29 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src45 appears to have run properly
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Jul 16 16:33:29 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Jul 16 16:33:51 2013] Spatial fit model total counts = 682.104000, observed total counts = 657.000000
[Tue Jul 16 16:33:51 2013] Offset between fit and detection position for source 22 = 5.225206 pixels
[Tue Jul 16 16:33:51 2013] 637.070000 total counts/ 139.735000 bgd. counts: snr = 42.072316
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 5.225206 pixels
  Position = (120.1, 359.5) = 7 18 34.29 37 51 18.2
  Extent = 26.8 (26.7-53.6)", rotation angle = 0
  Source counts = 497.3 +/- 25.2
  Background counts = 139.7
  Rate = 0.008 +/- 0.0004
[Tue Jul 16 16:33:51 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:51 2013] Assessing source extent using major axis lower bound
[Tue Jul 16 16:33:51 2013] Source does appear to be extended
[Tue Jul 16 16:33:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 16:33:51 2013] Source is confused with source 7
[Tue Jul 16 17:57:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 16 17:57:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 16 17:57:20 2013] Initial guess for spatial extent in simple fitting = 26.78"
[Tue Jul 16 17:57:20 2013] source mask rpix=6.2, npix_max = 177, mask sum = 179, frac = 1.010
[Tue Jul 16 17:57:20 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 26.78"
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39.ximg exists
[Tue Jul 16 18:49:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39.csv
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Jul 16 18:49:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39.csv
[Tue Jul 16 18:49:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Jul 16 18:49:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Jul 16 18:49:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Tue Jul 16 18:49:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 18:50:00 2013] Warning, spatial fit 39 centroid is now closest to src. 10
[Tue Jul 16 18:50:00 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 18:50:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 18:50:00 2013] Assessing source extent using major axis lower bound
[Tue Jul 16 18:50:00 2013] Source does appear to be extended
[Tue Jul 16 18:50:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 21:24:58 2013] XMMSAS src. selection expression = ellipse(10400.472000, 31228.857400, 1606.518046, 1606.518046, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing source region out to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_src.reg
[Tue Jul 16 21:24:58 2013] Extracting stamp from image fullrun_mos1_xmm0672420101_pi300-10000_cl_sm2.00.img.gz, (28, 267) - (212, 452)
[Tue Jul 16 21:24:58 2013] XMMSAS bgd. selection expression = annulus(10400.472000, 31228.857400, 2677.530077, 5355.060154, X, Y) && !ellipse(14885.386658, 33602.384735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12688.603470, 28205.923523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15968.300095, 28993.206085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10309.217400, 31111.716200, 1662.128048, 1662.128048, 0.000000, X, Y) && !ellipse(12252.990158, 31788.657227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9525.345810, 25419.127777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16424.606705, 35652.184174, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22.gif
[Tue Jul 16 21:40:57 2013] Mean detx,y = (-8500.01, 13240.73) 
[Tue Jul 16 21:40:57 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 16 21:41:28 2013] Binned source spectrum to 10 counts/bin
[Tue Jul 16 21:41:28 2013] Setting source spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Jul 16 21:41:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Jul 16 22:41:21 2013] Updating aperture counts using extracted products
[Tue Jul 16 22:41:21 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1342.00
[Tue Jul 16 22:41:21 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 3867.00
[Tue Jul 16 22:41:21 2013] Got source and background scale factors 6322197.000000, 24748147.000000
[Tue Jul 16 22:41:21 2013] User source parameters:
  Position = (120.1, 359.5) = 7 18 34.29 37 51 18.2
  Extent = 26.8 (26.7-53.6)", rotation angle = 0
  Source aperture counts = 354.1 +/- 37.6
  Background aperture counts = 987.9
  Rate = 0.006 +/- 0.0006

[Tue Jul 16 22:41:22 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul 16 22:41:22 2013] Using photon index=1.80, rate=0.00844, arf fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22.arf
[Tue Jul 16 22:41:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 16 22:41:22 2013] Updating source flux to 1.8e-13
[Tue Jul 16 22:41:24 2013] Flag c found in src. 22 procflags, skipping spectral fitting
[Tue Jul 16 22:41:31 2013] xmm0672420101/analysis//spectral/fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete