[Tue Jul 16 14:11:59 2013] Detection parameters:
  Position = (276.3, 238.1) = 7 17 36.92 37 42 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.8 +/- 22.9
  Background counts = 50.4
  Rate = 0.005 +/- 0.0004

[Tue Jul 16 14:11:59 2013] Off-axis axis estimate = 4.66'
[Tue Jul 16 15:46:37 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 15:46:37 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Tue Jul 16 15:46:37 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.950
[Tue Jul 16 15:46:37 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.76"
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul 16 16:33:29 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul 16 16:33:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue Jul 16 16:33:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672420101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 16 16:33:51 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 10.563400 pixels away
[Tue Jul 16 16:33:51 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 16:33:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 16:33:51 2013] Assessing source extent using major
[Tue Jul 16 16:33:51 2013] Source does appear to be extended
[Tue Jul 16 16:33:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 17:57:20 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Tue Jul 16 17:57:20 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Tue Jul 16 17:57:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.950
[Tue Jul 16 17:57:20 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.76"
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jul 16 18:49:39 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jul 16 18:49:39 2013] fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jul 16 18:49:39 2013] Fit fullrun_mos1_xmm0672420101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jul 16 18:50:00 2013] Spatial fit model total counts = 647.012000, observed total counts = 643.000000
[Tue Jul 16 18:50:00 2013] Offset between fit and detection position for source 16 = 0.096984 pixels
[Tue Jul 16 18:50:00 2013] 653.895000 total counts/ 434.203000 bgd. counts: snr = 10.543088
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.096984 pixels
  Position = (276.2, 238.2) = 7 17 36.93 37 42 31.5
  Extent = 5.7 (4.9-6.5)", rotation angle = 0
  Source counts = 219.7 +/- 25.6
  Background counts = 434.2
  Rate = 0.004 +/- 0.0004
[Tue Jul 16 18:50:00 2013] Vigneting correction estimate = 1.000000
[Tue Jul 16 18:50:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 16 18:50:00 2013] Assessing source extent using major axis lower bound
[Tue Jul 16 18:50:00 2013] Source does appear to be extended
[Tue Jul 16 18:50:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 16 21:24:58 2013] XMMSAS src. selection expression = ellipse(23982.609260, 20671.388600, 343.399810, 343.399810, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing source region out to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_src.reg
[Tue Jul 16 21:24:58 2013] Extracting stamp from image fullrun_mos1_xmm0672420101_pi300-10000_cl_sm2.00.img.gz, (256, 218) - (296, 258)
[Tue Jul 16 21:24:58 2013] XMMSAS bgd. selection expression = annulus(23982.609260, 20671.388600, 572.333016, 1144.666033, X, Y) && !ellipse(24611.769960, 23271.484000, 2464.096071, 1387.744040, 70.661700, X, Y) && !ellipse(24699.300000, 23061.864000, 2497.512072, 1341.328039, 66.633800, X, Y) && !ellipse(25310.412000, 21904.706000, 1277.160037, 1277.160037, 0.000000, X, Y)
[Tue Jul 16 21:24:58 2013] Writing fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16.gif
[Tue Jul 16 21:34:07 2013] Mean detx,y = (3532.80, 1228.32) 
[Tue Jul 16 21:34:08 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 16 21:34:13 2013] Binned source spectrum to 10 counts/bin
[Tue Jul 16 21:34:13 2013] Setting source spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul 16 21:34:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul 16 22:41:17 2013] Updating aperture counts using extracted products
[Tue Jul 16 22:41:17 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 296.00
[Tue Jul 16 22:41:17 2013] Total counts from fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_bgd.pi.gz = 295.00
[Tue Jul 16 22:41:17 2013] Got source and background scale factors 349608.000000, 1591376.000000
[Tue Jul 16 22:41:17 2013] User source parameters:
  Position = (276.2, 238.2) = 7 17 36.93 37 42 31.5
  Extent = 5.7 (4.9-6.5)", rotation angle = 0
  Source aperture counts = 231.2 +/- 18.2
  Background aperture counts = 64.8
  Rate = 0.004 +/- 0.0003

[Tue Jul 16 22:41:22 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jul 16 22:41:22 2013] Using photon index=1.80, rate=0.00373, arf fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16.arf
[Tue Jul 16 22:41:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 16 22:41:22 2013] Updating source flux to 4.9e-14
[Tue Jul 16 22:41:31 2013] xmm0672420101/analysis//spectral/fullrun_mos1_xmm0672420101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete