[Sat May 11 02:25:53 2013] Detection parameters:
  Position = (160.0, 303.9) = 20 1 21.48 22 44 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.4 +/- 19.6
  Background counts = 89.0
  Rate = 0.009 +/- 0.001

[Sat May 11 02:25:53 2013] Off-axis axis estimate = 10.05'
[Sat May 11 02:29:13 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Sat May 11 02:29:13 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Sat May 11 02:29:13 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.917
[Sat May 11 02:29:13 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.45"
[Sat May 11 02:59:04 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 11 02:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9.csv
[Sat May 11 02:59:04 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 11 02:59:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9.csv
[Sat May 11 02:59:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 02:59:04 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 02:59:04 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 02:59:04 2013] Fit fullrun_pn_xmm0672390201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat May 11 03:35:32 2013] Spatial fit model total counts = 372.917000, observed total counts = 340.000000
[Sat May 11 03:35:32 2013] Offset between fit and detection position for source 9 = 0.094861 pixels
[Sat May 11 03:35:32 2013] 372.236300 total counts/ 293.753000 bgd. counts: snr = 4.579163
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.094861 pixels
  Position = (160.0, 303.8) = 20 1 21.46 22 44 9.3
  Extent = 5.1 (2.9-6.5)", rotation angle = 0
  Source counts = 78.5 +/- 19.3
  Background counts = 293.8
  Rate = 0.004 +/- 0.001
[Sat May 11 03:35:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 03:35:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 03:35:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 03:35:32 2013] Source does appear to be extended
[Sat May 11 03:35:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 03:35:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 03:35:42 2013] Initial guess for spatial extent in simple fitting = 5.12"
[Sat May 11 03:35:42 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.065
[Sat May 11 03:35:42 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 5.12"
[Sat May 11 04:09:46 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9.ximg exists
[Sat May 11 04:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9.csv
[Sat May 11 04:09:46 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat May 11 04:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9.csv
[Sat May 11 04:09:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 04:09:46 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat May 11 04:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat May 11 04:09:46 2013] fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat May 11 04:09:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat May 11 04:09:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672390201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 04:37:48 2013] Spatial fit model total counts = 388.398000, observed total counts = 347.000000
[Sat May 11 04:37:48 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 04:37:48 2013] Vigneting correction estimate = 1.000000
[Sat May 11 04:37:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 04:37:48 2013] Assessing source extent using major axis lower bound
[Sat May 11 04:37:48 2013] Source does appear to be extended
[Sat May 11 04:37:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 04:37:59 2013] XMMSAS src. selection expression = ellipse(13873.403522, 26382.161740, 307.462809, 307.462809, 0.000000, X, Y)
[Sat May 11 04:37:59 2013] Writing source region out to fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_src.reg
[Sat May 11 04:37:59 2013] Extracting stamp from image fullrun_pn_xmm0672390201_pi300-10000_cl_sm2.00.img.gz, (142, 286) - (178, 321)
[Sat May 11 04:37:59 2013] XMMSAS bgd. selection expression = annulus(13873.403522, 26382.161740, 512.438015, 1024.876029, X, Y) && !ellipse(13758.035995, 27340.195465, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 04:37:59 2013] Writing fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9.gif
[Sat May 11 04:43:50 2013] Mean detx,y = (10582.57, -1622.62) 
[Sat May 11 04:43:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 04:44:07 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 04:44:07 2013] Setting source spectrum file to fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 11 04:44:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 11 04:57:59 2013] Not generating rmf since there are only 78 counts
[Sat May 11 04:57:59 2013] rmf not generated due to insufficient counts
[Sat May 11 05:22:45 2013] Updating aperture counts using extracted products
[Sat May 11 05:22:45 2013] Total counts from fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 127.00
[Sat May 11 05:22:45 2013] Total counts from fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_bgd.pi.gz = 238.00
[Sat May 11 05:22:45 2013] Got source and background scale factors 294400.000000, 1575573.000000
[Sat May 11 05:22:45 2013] User source parameters:
  Position = (160.0, 303.8) = 20 1 21.46 22 44 9.3
  Extent = 5.1 (2.9-6.5)", rotation angle = 0
  Source aperture counts = 82.5 +/- 12.3
  Background aperture counts = 44.5
  Rate = 0.005 +/- 0.0007

[Sat May 11 05:22:47 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 05:22:47 2013] Using photon index=1.80, rate=0.0044, arf fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9.arf
[Sat May 11 05:22:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 05:22:47 2013] Updating source flux to 4e-14
[Sat May 11 05:22:53 2013] Flag p found in src. 9 procflags, skipping spectral fitting
[Sat May 11 05:22:53 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 11 05:22:56 2013] xmm0672390201/analysis//spectral/fullrun_pn_xmm0672390201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete