[Fri Jun 21 13:01:59 2013] Detection parameters:
  Position = (315.9, 332.8) = 18 22 16.96 -16 3 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.4 +/- 15.5
  Background counts = 32.8
  Rate = 0.01 +/- 0.002

[Fri Jun 21 13:01:59 2013] Off-axis axis estimate = 2.80'
[Fri Jun 21 13:03:44 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 13:03:44 2013] Initial guess for spatial extent in simple fitting = 7.83"
[Fri Jun 21 13:03:44 2013] source mask rpix=1.8, npix_max = 21, mask sum = 12, frac = 0.567
[Fri Jun 21 13:03:44 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.83"
[Fri Jun 21 13:22:01 2013] fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 21 13:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7.csv
[Fri Jun 21 13:22:01 2013] fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 21 13:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7.csv
[Fri Jun 21 13:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:22:01 2013] fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 21 13:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 21 13:22:01 2013] fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 21 13:22:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Fri Jun 21 13:22:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 14:11:50 2013] Source 7 is offset by -2.584581 and 1.172201 pixels which is larger than
2 X fitted extent = 1.041283 x 1.041283, not incorporating fit results
[Fri Jun 21 14:11:50 2013] Source 7 is offset by 0.999718 and 4.303419 pixels which is larger than
2 X fitted extent = 0.899637 x 0.899637, not incorporating fit results
[Fri Jun 21 14:11:50 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 14:11:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 14:11:50 2013] Assessing source extent using major
[Fri Jun 21 14:11:50 2013] Source does appear to be extended
[Fri Jun 21 14:11:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 14:11:50 2013] Deleting source due to low Poisson probability 0.9