[Fri Jun 21 13:02:15 2013] Detection parameters:
  Position = (464.5, 193.9) = 18 21 32.07 -16 13 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.2 +/- 9.9
  Background counts = 9.6
  Rate = 0.005 +/- 0.0008

[Fri Jun 21 13:02:15 2013] Off-axis axis estimate = 14.23'
[Fri Jun 21 13:22:01 2013] Using EEF radius (= 13.54 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 13:22:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 21 13:22:01 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Fri Jun 21 13:22:01 2013] source mask rpix=3.1, npix_max = 52, mask sum = 39, frac = 0.747
[Fri Jun 21 13:22:01 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.54"
[Fri Jun 21 13:28:58 2013] fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 21 13:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4.csv
[Fri Jun 21 13:28:58 2013] fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 21 13:28:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4.csv
[Fri Jun 21 13:28:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 13:28:59 2013] fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 21 13:28:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 21 13:28:59 2013] fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 21 13:28:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 21 13:28:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672281801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 14:11:51 2013] Spatial fit model total counts = 153.517000, observed total counts = 130.000000
[Fri Jun 21 14:11:51 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 14:11:51 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 14:11:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 14:11:51 2013] Assessing source extent using major
[Fri Jun 21 14:11:51 2013] Source does appear to be extended
[Fri Jun 21 14:11:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 14:11:51 2013] Deleting source due to low Poisson probability 0.8