[Thu May 16 14:37:14 2013] Detection parameters:
  Position = (359.2, 338.6) = 1 34 40.94 30 43 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 14.4
  Background counts = 66.8
  Rate = 0.0008 +/- 0.0001

[Thu May 16 14:37:14 2013] Off-axis axis estimate = 5.28'
[Thu May 16 18:07:20 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Thu May 16 18:07:20 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Thu May 16 18:07:20 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Thu May 16 18:07:20 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.07"
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38.ximg exists
[Thu May 16 19:25:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38.csv
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu May 16 19:25:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38.csv
[Thu May 16 19:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 19:25:54 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu May 16 19:25:54 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu May 16 19:25:54 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu May 16 19:25:54 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu May 16 19:25:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 19:26:17 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.451128 pixels away
[Thu May 16 19:26:17 2013] Vigneting correction estimate = 1.000000
[Thu May 16 19:26:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 19:26:17 2013] Assessing source extent using major
[Thu May 16 19:26:17 2013] Source does appear to be extended
[Thu May 16 19:26:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 21:37:57 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Thu May 16 21:37:57 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Thu May 16 21:37:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Thu May 16 21:37:57 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 9.07"
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37.ximg exists
[Thu May 16 23:14:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37.csv
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May 16 23:14:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37.csv
[Thu May 16 23:14:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May 16 23:14:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May 16 23:14:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 16 23:14:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:14:41 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 12.187294 pixels away
[Thu May 16 23:14:41 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:14:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:14:41 2013] Assessing source extent using major
[Thu May 16 23:14:41 2013] Source does appear to be extended
[Thu May 16 23:14:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 03:18:54 2013] XMMSAS src. selection expression = ellipse(31198.616791, 29410.130646, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 03:18:54 2013] Writing source region out to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_src.reg
[Fri May 17 03:18:54 2013] Extracting stamp from image fullrun_mos1_xmm0672190301_pi300-10000_cl_sm2.00.img.gz, (322, 301) - (397, 376)
[Fri May 17 03:18:54 2013] XMMSAS bgd. selection expression = annulus(31198.616791, 29410.130646, 1087.500000, 2175.000000, X, Y) && !ellipse(31819.099792, 32046.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29101.217987, 31097.412384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30783.111000, 31335.242800, 427.534412, 427.534412, 0.000000, X, Y) && !ellipse(32727.048126, 30870.110016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29315.844800, 29101.667000, 373.832011, 373.832011, 0.000000, X, Y)
[Fri May 17 03:18:54 2013] Writing fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26.gif
[Fri May 17 03:43:16 2013] Mean detx,y = (3567.26, 2549.28) 
[Fri May 17 03:43:19 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 03:43:34 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 03:43:35 2013] Setting source spectrum file to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 17 03:43:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 17 04:30:59 2013] Not generating rmf since there are only 79 counts
[Fri May 17 04:30:59 2013] rmf not generated due to insufficient counts
[Fri May 17 04:37:33 2013] Updating aperture counts using extracted products
[Fri May 17 04:37:33 2013] Total counts from fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 489.00
[Fri May 17 04:37:33 2013] Total counts from fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2580.00
[Fri May 17 04:37:33 2013] Got source and background scale factors 1239120.000000, 7877280.000000
[Fri May 17 04:37:33 2013] User source parameters:
  Position = (359.2, 338.6) = 1 34 40.94 30 43 28.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83.2 +/- 23.1
  Background aperture counts = 405.8
  Rate = 0.0007 +/- 0.0002

[Fri May 17 04:37:33 2013] Updating counts from extracted products
[Fri May 17 04:37:33 2013] Set source signif. to 83.16/20.15 = 4.13
[Fri May 17 04:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 04:37:37 2013] Using photon index=1.80, rate=0.000673, arf fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26.arf
[Fri May 17 04:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 04:37:37 2013] Updating source flux to 8.6e-15
[Fri May 17 04:37:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 04:37:55 2013] xmm0672190301/analysis//spectral/fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete