[Thu May 16 14:37:13 2013] Detection parameters:
  Position = (503.6, 284.1) = 1 33 52.27 30 39 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1069.0 +/- 60.0
  Background counts = 165.3
  Rate = 0.009 +/- 0.0005

[Thu May 16 14:37:14 2013] Off-axis axis estimate = 14.91'
[Thu May 16 18:07:20 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Thu May 16 18:07:20 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Thu May 16 18:07:20 2013] source mask rpix=3.2, npix_max = 54, mask sum = 34, frac = 0.624
[Thu May 16 18:07:20 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.88"
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 16 19:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2.csv
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 16 19:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2.csv
[Thu May 16 19:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 16 19:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 16 19:25:53 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 16 19:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 16 19:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 19:26:17 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 17.841037 pixels away
[Thu May 16 19:26:17 2013] Vigneting correction estimate = 1.000000
[Thu May 16 19:26:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 19:26:17 2013] Assessing source extent using major
[Thu May 16 19:26:17 2013] Source does appear to be extended
[Thu May 16 19:26:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 19:26:17 2013] Source is confused with source 2
[Thu May 16 21:37:57 2013] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Thu May 16 21:37:57 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Thu May 16 21:37:57 2013] source mask rpix=3.2, npix_max = 54, mask sum = 34, frac = 0.624
[Thu May 16 21:37:57 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.88"
[Thu May 16 23:14:18 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 16 23:14:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2.csv
[Thu May 16 23:14:18 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 16 23:14:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2.csv
[Thu May 16 23:14:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 16 23:14:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 16 23:14:19 2013] fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 16 23:14:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 16 23:14:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672190301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:14:41 2013] Source 1 is offset by 3.320764 and 4.623453 pixels which is larger than
2 X fitted extent = 2.099246 x 4.884138, not incorporating fit results
[Thu May 16 23:14:41 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.504012 pixels away
[Thu May 16 23:14:41 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:14:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:14:41 2013] Assessing source extent using major
[Thu May 16 23:14:41 2013] Source does appear to be extended
[Thu May 16 23:14:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 03:18:53 2013] Counts = 1068.993164, rescaling region sizes by 2.000000
[Fri May 17 03:18:53 2013] XMMSAS src. selection expression = ellipse(43763.808441, 24668.524445, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 17 03:18:53 2013] Writing source region out to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_src.reg
[Fri May 17 03:18:53 2013] Extracting stamp from image fullrun_mos1_xmm0672190301_pi300-10000_cl_sm2.00.img.gz, (429, 209) - (579, 359)
[Fri May 17 03:18:53 2013] XMMSAS bgd. selection expression = annulus(43763.808441, 24668.524445, 4350.000000, 8700.000000, X, Y) && !ellipse(44015.985779, 25202.647308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39044.302920, 28167.099880, 527.911215, 275.072008, 88.045395, X, Y) && !ellipse(34819.808594, 29262.965027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43816.656799, 26164.338745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39133.588684, 24994.734619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39053.874340, 23745.127200, 700.132020, 700.132020, 0.000000, X, Y) && !ellipse(34957.596649, 30986.240997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35622.962921, 23793.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44406.540588, 26579.094147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34954.779000, 22436.302400, 684.344820, 684.344820, 0.000000, X, Y) && !ellipse(37705.464355, 24843.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37064.707550, 24261.840332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37419.750400, 18629.646000, 384.257611, 228.270407, 132.089762, X, Y) && !ellipse(38132.321381, 24491.627808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39375.196350, 24171.452515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42020.725952, 18649.408417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39787.941895, 20341.882065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44142.301453, 30106.555450, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 03:18:53 2013] Writing fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1.gif
[Fri May 17 03:22:17 2013] Mean detx,y = (3248.67, 16088.03) 
[Fri May 17 03:22:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 03:24:18 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 03:24:19 2013] Setting source spectrum file to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri May 17 03:24:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri May 17 03:53:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 17 03:53:04 2013] rmf not generated due to insufficient counts
[Fri May 17 04:37:23 2013] Updating aperture counts using extracted products
[Fri May 17 04:37:23 2013] Total counts from fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 15664.00
[Fri May 17 04:37:23 2013] Total counts from fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 23795.00
[Fri May 17 04:37:23 2013] Got source and background scale factors 1574552.000000, 64294363.000000
[Fri May 17 04:37:23 2013] User source parameters:
  Position = (503.6, 284.1) = 1 33 52.27 30 39 12.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 15081.3 +/- 126.2
  Background aperture counts = 582.7
  Rate = 0.1 +/- 0.001

[Fri May 17 04:37:23 2013] Updating counts from extracted products
[Fri May 17 04:37:23 2013] Set source signif. to 15081.27/24.14 = 624.75
[Fri May 17 04:37:35 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 04:37:35 2013] Using photon index=1.80, rate=0.122, arf fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1.arf
[Fri May 17 04:37:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 04:37:35 2013] Updating source flux to 4.9e-12
[Fri May 17 04:37:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 04:37:55 2013] xmm0672190301/analysis//spectral/fullrun_mos1_xmm0672190301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete