[Thu Aug  9 11:12:16 2012] Detection parameters:
  Position = (346.4, 338.7) = 0 42 16.19 40 55 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4525.0 +/- 79.9
  Background counts = 206.7
  Rate = 0.08 +/- 0.001

[Thu Aug  9 11:12:18 2012] Off-axis axis estimate = 4.54'
[Thu Aug  9 11:22:39 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:22:39 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Thu Aug  9 11:22:39 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.881
[Thu Aug  9 11:22:39 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.70"
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7.csv
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7.csv
[Thu Aug  9 15:15:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Aug  9 15:15:18 2012] Fit fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Aug  9 19:13:54 2012] Spatial fit model total counts = 5527.220000, observed total counts = 5107.000000
[Thu Aug  9 19:13:54 2012] Offset between fit and detection position for source 7 = 0.154140 pixels
[Thu Aug  9 19:13:54 2012] 5492.930000 total counts/ 2440.410000 bgd. counts: snr = 61.791270
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.154140 pixels
  Position = (346.2, 338.6) = 0 42 16.25 40 55 51.8
  Extent = 5.2 (5.1-5.4)", rotation angle = 0
  Source counts = 3052.5 +/- 74.1
  Background counts = 2440.4
  Rate = 0.03 +/- 0.0008
[Thu Aug  9 19:13:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:13:55 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 19:13:55 2012] Source does appear to be extended
[Thu Aug  9 19:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 19:14:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 19:14:52 2012] Initial guess for spatial extent in simple fitting = 5.21"
[Thu Aug  9 19:14:52 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.780
[Thu Aug  9 19:14:52 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.21"
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Aug  9 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7.csv
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Aug  9 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7.csv
[Thu Aug  9 21:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Aug  9 21:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Aug  9 21:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu Aug  9 21:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:46 2012] Warning, spatial fit 7 centroid is now closest to src. 39
[Fri Aug 10 00:17:46 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:17:46 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 00:17:46 2012] Source does appear to be extended
[Fri Aug 10 00:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 00:18:24 2012] Counts = 3052.520000, rescaling region sizes by 2.000000
[Fri Aug 10 00:18:24 2012] XMMSAS src. selection expression = ellipse(30071.369220, 29412.668400, 625.605618, 625.605618, 0.000000, X, Y)
[Fri Aug 10 00:18:24 2012] Writing source region out to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7_src.reg
[Fri Aug 10 00:18:24 2012] Extracting stamp from image fullrun_pn_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (310, 303) - (382, 375)
[Fri Aug 10 00:18:24 2012] XMMSAS bgd. selection expression = annulus(30071.369220, 29412.668400, 2085.352060, 4170.704120, X, Y) && !ellipse(28802.694458, 33649.599121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.119800, 30949.992600, 1359.914439, 1359.914439, 0.000000, X, Y) && !ellipse(30253.429016, 35860.585388, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27640.144745, 33879.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.149048, 28293.109375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.458400, 32930.884800, 407.400812, 407.400812, 0.000000, X, Y) && !ellipse(28173.935730, 31161.125122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25555.958000, 29628.355400, 513.192015, 513.192015, 0.000000, X, Y) && !ellipse(31491.114000, 28718.244000, 1420.600041, 1420.600041, 0.000000, X, Y) && !ellipse(27661.966431, 28873.437714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31092.093500, 26675.743800, 377.797611, 377.797611, 0.000000, X, Y)
[Fri Aug 10 00:18:24 2012] Writing fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7.gif
[Fri Aug 10 00:49:37 2012] Mean detx,y = (-4181.57, 5931.29) 
[Fri Aug 10 00:49:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 00:50:37 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 00:50:37 2012] Setting source spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug 10 00:50:37 2012] Setting bgd. spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Aug 10 06:28:24 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:24 2012] Error reading totcts from fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug 10 06:28:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:25 2012] Using photon index=1.80, rate=0.0335, arf fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src7.arf
[Fri Aug 10 06:28:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:25 2012] Updating source flux to 1.3e-13