[Thu Aug  9 11:12:16 2012] Detection parameters:
  Position = (348.3, 412.7) = 0 42 15.42 41 1 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 18617.8 +/- 159.3
  Background counts = 212.2
  Rate = 0.2 +/- 0.002

[Thu Aug  9 11:12:18 2012] Off-axis axis estimate = 9.04'
[Thu Aug  9 11:22:39 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:22:39 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Thu Aug  9 11:22:39 2012] source mask rpix=2.5, npix_max = 36, mask sum = 31, frac = 0.851
[Thu Aug  9 11:22:39 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.95"
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6.csv
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6.csv
[Thu Aug  9 15:15:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug  9 15:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug  9 15:15:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Aug  9 15:15:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:13:54 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.370436 pixels away
[Thu Aug  9 19:13:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:13:55 2012] Assessing source extent using major
[Thu Aug  9 19:13:55 2012] Source does appear to be extended
[Thu Aug  9 19:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 19:14:52 2012] Using EEF radius (= 10.95 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 19:14:52 2012] Initial guess for spatial extent in simple fitting = 10.95"
[Thu Aug  9 19:14:52 2012] source mask rpix=2.5, npix_max = 36, mask sum = 31, frac = 0.851
[Thu Aug  9 19:14:52 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.95"
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6.ximg exists
[Thu Aug  9 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6.csv
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Aug  9 21:07:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6.csv
[Thu Aug  9 21:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Aug  9 21:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Aug  9 21:07:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu Aug  9 21:07:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:46 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.064365 pixels away
[Fri Aug 10 00:17:46 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:17:46 2012] Assessing source extent using major
[Fri Aug 10 00:17:46 2012] Source does appear to be extended
[Fri Aug 10 00:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 00:18:24 2012] Counts = 18617.849609, rescaling region sizes by 3.000000
[Fri Aug 10 00:18:24 2012] XMMSAS src. selection expression = ellipse(30253.429016, 35860.585388, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Aug 10 00:18:24 2012] Writing source region out to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6_src.reg
[Fri Aug 10 00:18:24 2012] Extracting stamp from image fullrun_pn_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (236, 300) - (461, 525)
[Fri Aug 10 00:18:24 2012] XMMSAS bgd. selection expression = annulus(30253.429016, 35860.585388, 9787.500000, 19575.000000, X, Y) && !ellipse(28802.694458, 33649.599121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.119800, 30949.992600, 1359.914439, 1359.914439, 0.000000, X, Y) && !ellipse(24181.460310, 24613.008395, 1434.854953, 1384.975811, 3.994962, X, Y) && !ellipse(17352.151810, 20676.202026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30071.369220, 29412.668400, 417.070412, 417.070412, 0.000000, X, Y) && !ellipse(10787.365532, 27723.446289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41535.415802, 26499.737976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43257.327087, 24754.515533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.425339, 20922.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18435.885651, 20331.690735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33138.479431, 17719.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36159.353180, 35716.929718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38883.240662, 35578.865540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27640.144745, 33879.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15229.866089, 31814.623413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22432.472046, 30548.089478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.149048, 28293.109375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.992035, 22828.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19681.612122, 16121.863007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28406.452576, 15427.740112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26316.421478, 38558.137634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27977.378601, 38223.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29556.236908, 36089.215271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17318.723663, 35103.933899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37849.313843, 34763.479492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32247.236542, 34685.878296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21306.823257, 34068.833557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15365.653580, 33665.462921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20540.718800, 33203.046720, 326.475209, 326.475209, 0.000000, X, Y) && !ellipse(17427.825455, 33095.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25574.458400, 32930.884800, 407.400812, 407.400812, 0.000000, X, Y) && !ellipse(28173.935730, 31161.125122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20993.868317, 30315.453156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19782.740860, 29945.225250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25555.958000, 29628.355400, 513.192015, 513.192015, 0.000000, X, Y) && !ellipse(31491.114000, 28718.244000, 1420.600041, 1420.600041, 0.000000, X, Y) && !ellipse(27661.966431, 28873.437714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.258800, 28704.888800, 501.776814, 501.776814, 0.000000, X, Y) && !ellipse(17138.336990, 28770.812866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11516.891251, 27515.058350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16568.912857, 27446.547974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.053600, 27005.728400, 443.164813, 443.164813, 0.000000, X, Y) && !ellipse(11941.892410, 26728.784698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.871600, 26188.000000, 955.608027, 955.608027, 0.000000, X, Y) && !ellipse(31092.093500, 26675.743800, 377.797611, 377.797611, 0.000000, X, Y) && !ellipse(24149.059998, 23328.148834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16142.626663, 22889.150360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.569885, 22606.376465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21401.787600, 20307.573200, 366.769611, 366.769611, 0.000000, X, Y) && !ellipse(41872.166443, 20286.533997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30021.706024, 20283.521866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16153.242579, 19271.499798, 453.118197, 288.695821, 228.218259, X, Y) && !ellipse(34613.180939, 19022.247543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.694916, 18985.455475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35451.562195, 18945.045929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24352.642334, 17541.649216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22986.892609, 17464.014832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22239.430176, 40125.935089, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 00:18:24 2012] Writing fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6.gif
[Fri Aug 10 00:39:55 2012] Mean detx,y = (-2607.99, 12192.37) 
[Fri Aug 10 00:40:13 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 00:48:47 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 00:48:48 2012] Setting source spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 10 00:48:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Aug 10 02:20:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 02:20:31 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:24 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:24 2012] Error reading totcts from fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Aug 10 06:28:25 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:25 2012] Using photon index=1.80, rate=0.188, arf fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src6.arf
[Fri Aug 10 06:28:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:25 2012] Updating source flux to 1.1e-12
[Fri Aug 10 06:33:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting