[Thu Aug  9 11:12:16 2012] Detection parameters:
  Position = (212.5, 234.3) = 0 43 7.53 40 48 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2280.1 +/- 61.6
  Background counts = 194.1
  Rate = 0.04 +/- 0.001

[Thu Aug  9 11:12:18 2012] Off-axis axis estimate = 7.78'
[Thu Aug  9 11:22:39 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:22:39 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Thu Aug  9 11:22:39 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.909
[Thu Aug  9 11:22:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.32"
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11.csv
[Thu Aug  9 15:15:17 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Aug  9 15:15:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11.csv
[Thu Aug  9 15:15:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Aug  9 15:15:18 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Aug  9 15:15:18 2012] Fit fullrun_pn_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Aug  9 19:13:54 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.564020 pixels away
[Thu Aug  9 19:13:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:13:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:13:55 2012] Assessing source extent using major
[Thu Aug  9 19:13:55 2012] Source does appear to be extended
[Thu Aug  9 19:13:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 19:14:52 2012] Using EEF radius (= 10.32 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 19:14:52 2012] Initial guess for spatial extent in simple fitting = 10.32"
[Thu Aug  9 19:14:52 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.909
[Thu Aug  9 19:14:52 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.32"
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src11.ximg exists
[Thu Aug  9 21:07:32 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu Aug  9 21:07:32 2012] Fit fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_src11 appears to have run properly
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu Aug  9 21:07:33 2012] fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Aug  9 21:07:33 2012] Fit fullrun_pn_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Aug 10 00:17:46 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.642765 pixels away
[Fri Aug 10 00:17:46 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:17:46 2012] Assessing source extent using major
[Fri Aug 10 00:17:46 2012] Source does appear to be extended
[Fri Aug 10 00:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 00:18:25 2012] Counts = 2280.132568, rescaling region sizes by 2.000000
[Fri Aug 10 00:18:25 2012] XMMSAS src. selection expression = ellipse(18435.885651, 20331.690735, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 10 00:18:25 2012] Writing source region out to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 10 00:18:25 2012] Extracting stamp from image fullrun_pn_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (137, 159) - (287, 309)
[Fri Aug 10 00:18:25 2012] XMMSAS bgd. selection expression = annulus(18435.885651, 20331.690735, 4350.000000, 8700.000000, X, Y) && !ellipse(24181.460310, 24613.008395, 1434.854953, 1384.975811, 3.994962, X, Y) && !ellipse(17352.151810, 20676.202026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10787.365532, 27723.446289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.425339, 20922.283417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24683.419159, 14356.770325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27841.149048, 28293.109375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.992035, 22828.692688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19681.612122, 16121.863007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14921.813660, 14154.832779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27661.966431, 28873.437714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.258800, 28704.888800, 501.776814, 501.776814, 0.000000, X, Y) && !ellipse(17138.336990, 28770.812866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11516.891251, 27515.058350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16568.912857, 27446.547974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24004.053600, 27005.728400, 443.164813, 443.164813, 0.000000, X, Y) && !ellipse(11941.892410, 26728.784698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24679.871600, 26188.000000, 955.608027, 955.608027, 0.000000, X, Y) && !ellipse(24149.059998, 23328.148834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16142.626663, 22889.150360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21401.787600, 20307.573200, 366.769611, 366.769611, 0.000000, X, Y) && !ellipse(16153.242579, 19271.499798, 453.118197, 288.695821, 228.218259, X, Y) && !ellipse(23720.694916, 18985.455475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24352.642334, 17541.649216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22986.892609, 17464.014832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26084.268372, 12735.832458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25805.508881, 10949.790268, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 00:18:25 2012] Writing fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12.gif
[Fri Aug 10 00:58:59 2012] Mean detx,y = (5122.85, -5853.17) 
[Fri Aug 10 00:59:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 01:02:43 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 01:02:43 2012] Setting source spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 10 01:02:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 10 02:26:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 02:26:23 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:24 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:24 2012] Error reading totcts from fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 10 06:28:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:26 2012] Using photon index=1.80, rate=0.0355, arf fullrun_pn_xmm0672130101_pi300-10000_pass1_cl_src12.arf
[Fri Aug 10 06:28:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:26 2012] Updating source flux to 1.1e-13
[Fri Aug 10 06:33:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting