[Thu Aug  9 11:13:46 2012] Detection parameters:
  Position = (276.7, 310.9) = 0 42 42.91 40 53 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.4 +/- 15.0
  Background counts = 43.8
  Rate = 0.001 +/- 0.0002

[Thu Aug  9 11:13:47 2012] Off-axis axis estimate = 1.81'
[Thu Aug  9 16:46:03 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 16:46:03 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Aug  9 16:46:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Thu Aug  9 16:46:03 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 7.34"
[Thu Aug  9 19:13:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53.ximg exists
[Thu Aug  9 19:13:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53.csv
[Thu Aug  9 19:13:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53_1.ximg exists
[Thu Aug  9 19:13:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53.csv
[Thu Aug  9 19:13:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:13:34 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Thu Aug  9 19:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Aug  9 19:13:34 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Thu Aug  9 19:13:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Thu Aug  9 19:13:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:14:27 2012] Warning, spatial fit 53 centroid is now closest to src. 61
[Thu Aug  9 19:14:28 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:14:28 2012] Assessing source extent using major
[Thu Aug  9 19:14:28 2012] Source does appear to be extended
[Thu Aug  9 19:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 22:20:15 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 22:20:15 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Aug  9 22:20:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Thu Aug  9 22:20:15 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 7.34"
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53.csv
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53.csv
[Fri Aug 10 00:17:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Aug 10 00:17:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Aug 10 00:17:32 2012] Fit fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Aug 10 00:18:07 2012] Spatial fit model total counts = 542.115000, observed total counts = 506.000000
[Fri Aug 10 00:18:07 2012] Offset between fit and detection position for source 56 = 0.199182 pixels
[Fri Aug 10 00:18:07 2012] 544.163200 total counts/ 480.789000 bgd. counts: snr = 2.890249
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.199182 pixels
  Position = (276.6, 310.9) = 0 42 42.99 40 53 51.1
  Extent = 5.0 (3.8-6.6)", rotation angle = 0
  Source counts = 63.4 +/- 23.3
  Background counts = 480.8
  Rate = 0.0006 +/- 0.0002
[Fri Aug 10 00:18:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:18:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 00:18:07 2012] Source does appear to be extended
[Fri Aug 10 00:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 04:26:31 2012] XMMSAS src. selection expression = ellipse(24011.503200, 26997.452540, 298.999209, 298.999209, 0.000000, X, Y)
[Fri Aug 10 04:26:31 2012] Writing source region out to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56_src.reg
[Fri Aug 10 04:26:31 2012] Extracting stamp from image fullrun_mos2_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (259, 294) - (294, 328)
[Fri Aug 10 04:26:31 2012] XMMSAS bgd. selection expression = annulus(24011.503200, 26997.452540, 498.332014, 996.664029, X, Y) && !ellipse(24832.751282, 25353.752991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.425934, 28693.939148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.147339, 25447.929535, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 04:26:31 2012] Writing fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56.gif
[Fri Aug 10 05:06:19 2012] Mean detx,y = (-938.58, -2149.39) 
[Fri Aug 10 05:06:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 05:06:27 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 05:06:28 2012] Setting source spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Aug 10 05:06:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Aug 10 06:23:11 2012] Not generating rmf since there are only 63 counts
[Fri Aug 10 06:23:11 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:33 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:33 2012] Error reading totcts from fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Aug 10 06:28:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:36 2012] Using photon index=1.80, rate=0.00063, arf fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src56.arf
[Fri Aug 10 06:28:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:36 2012] Updating source flux to 7.1e-15
[Fri Aug 10 06:30:30 2012] Source 56 has fewer than 100.000000 counts, skipping spectral fitting