[Thu Aug  9 11:13:45 2012] Detection parameters:
  Position = (367.9, 446.6) = 0 42 7.88 41 3 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 13.3
  Background counts = 40.6
  Rate = 0.0005 +/- 0.0001

[Thu Aug  9 11:13:47 2012] Off-axis axis estimate = 11.86'
[Thu Aug  9 16:46:03 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 16:46:03 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Thu Aug  9 16:46:03 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Thu Aug  9 16:46:03 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 12.36"
[Thu Aug  9 19:13:33 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69.ximg exists
[Thu Aug  9 19:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69.csv
[Thu Aug  9 19:13:33 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69_1.ximg exists
[Thu Aug  9 19:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69.csv
[Thu Aug  9 19:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:13:34 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Thu Aug  9 19:13:34 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Thu Aug  9 19:13:34 2012] Fit fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Thu Aug  9 19:14:27 2012] Source 35 is offset by -3.723892 and 0.223892 pixels which is larger than
2 X fitted extent = 1.449306 x 1.449306, not incorporating fit results
[Thu Aug  9 19:14:27 2012] Source 35 is offset by -4.115605 and 1.039341 pixels which is larger than
2 X fitted extent = 1.386262 x 1.386262, not incorporating fit results
[Thu Aug  9 19:14:27 2012] Warning, spatial fit 69 centroid is now closest to src. 4
[Thu Aug  9 19:14:28 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:14:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:14:28 2012] Assessing source extent using major
[Thu Aug  9 19:14:28 2012] Source does appear to be extended
[Thu Aug  9 19:14:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 22:20:15 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 22:20:15 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Thu Aug  9 22:20:15 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Thu Aug  9 22:20:15 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 12.36"
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67.csv
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67.csv
[Fri Aug 10 00:17:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Aug 10 00:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Aug 10 00:17:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Aug 10 00:17:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Fri Aug 10 00:17:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:18:07 2012] Source 35 is offset by -4.094242 and 1.043272 pixels which is larger than
2 X fitted extent = 1.386262 x 1.386262, not incorporating fit results
[Fri Aug 10 00:18:07 2012] Warning, spatial fit 67 centroid is now closest to src. 13
[Fri Aug 10 00:18:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:18:07 2012] Assessing source extent using major
[Fri Aug 10 00:18:07 2012] Source does appear to be extended
[Fri Aug 10 00:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 00:18:07 2012] Source is confused with source 31
[Fri Aug 10 04:26:31 2012] XMMSAS src. selection expression = ellipse(31956.237366, 38808.262634, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 10 04:26:31 2012] Writing source region out to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35_src.reg
[Fri Aug 10 04:26:31 2012] Extracting stamp from image fullrun_mos2_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (330, 409) - (405, 484)
[Fri Aug 10 04:26:31 2012] XMMSAS bgd. selection expression = annulus(31956.237366, 38808.262634, 1087.500000, 2175.000000, X, Y) && !ellipse(30271.382324, 35867.061005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31304.764800, 39739.919400, 456.912013, 456.912013, 0.000000, X, Y) && !ellipse(32765.924000, 40045.935000, 2047.872059, 2047.872059, 0.000000, X, Y) && !ellipse(32502.217590, 37718.633301, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 04:26:31 2012] Writing fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35.gif
[Fri Aug 10 05:12:27 2012] Mean detx,y = (3499.47, -15721.32) 
[Fri Aug 10 05:12:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 05:12:38 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 05:12:38 2012] Setting source spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Aug 10 05:12:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Aug 10 06:25:27 2012] Not generating rmf since there are only 52 counts
[Fri Aug 10 06:25:27 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:34 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:34 2012] Error reading totcts from fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Aug 10 06:28:36 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:36 2012] Using photon index=1.80, rate=0.00052, arf fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src35.arf
[Fri Aug 10 06:28:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:36 2012] Updating source flux to 1.3e-14
[Fri Aug 10 06:30:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting