[Thu Aug  9 11:13:44 2012] Detection parameters:
  Position = (300.3, 354.8) = 0 42 33.87 40 57 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9199.4 +/- 111.2
  Background counts = 44.6
  Rate = 0.2 +/- 0.002

[Thu Aug  9 11:13:47 2012] Off-axis axis estimate = 4.09'
[Thu Aug  9 16:46:02 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 16:46:02 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Thu Aug  9 16:46:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.918
[Thu Aug  9 16:46:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.47"
[Thu Aug  9 19:13:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 19:13:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 19:13:32 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 19:13:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 19:13:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:13:33 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 19:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  9 19:13:33 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 19:13:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  9 19:13:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:14:27 2012] Warning, spatial fit 1 centroid is now closest to src. 45
[Thu Aug  9 19:14:27 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:14:27 2012] Assessing source extent using major
[Thu Aug  9 19:14:27 2012] Source does appear to be extended
[Thu Aug  9 19:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 22:20:15 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 22:20:15 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Thu Aug  9 22:20:15 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.918
[Thu Aug  9 22:20:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.47"
[Fri Aug 10 00:17:30 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 10 00:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 00:17:30 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 10 00:17:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1.csv
[Fri Aug 10 00:17:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 10 00:17:31 2012] fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 10 00:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug 10 00:17:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:18:07 2012] Source 1 is offset by -4.841530 and -0.260139 pixels which is larger than
2 X fitted extent = 0.642910 x 0.642910, not incorporating fit results
[Fri Aug 10 00:18:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:18:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:18:07 2012] Assessing source extent using major
[Fri Aug 10 00:18:07 2012] Source does appear to be extended
[Fri Aug 10 00:18:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 04:26:30 2012] Counts = 9199.381836, rescaling region sizes by 2.000000
[Fri Aug 10 04:26:30 2012] XMMSAS src. selection expression = ellipse(26077.752930, 30815.480133, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 10 04:26:30 2012] Writing source region out to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug 10 04:26:30 2012] Extracting stamp from image fullrun_mos2_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (225, 280) - (375, 430)
[Fri Aug 10 04:26:30 2012] XMMSAS bgd. selection expression = annulus(26077.752930, 30815.480133, 4350.000000, 8700.000000, X, Y) && !ellipse(24194.413000, 24611.226400, 430.764012, 430.764012, 0.000000, X, Y) && !ellipse(30271.382324, 35867.061005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.888000, 33671.381000, 446.618413, 446.618413, 0.000000, X, Y) && !ellipse(27306.906708, 39882.883087, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30077.338000, 29408.675200, 389.326411, 389.326411, 0.000000, X, Y) && !ellipse(31304.764800, 39739.919400, 456.912013, 456.912013, 0.000000, X, Y) && !ellipse(32765.924000, 40045.935000, 2047.872059, 2047.872059, 0.000000, X, Y) && !ellipse(27618.438240, 33906.316000, 491.318414, 339.415210, 31.902400, X, Y) && !ellipse(26349.354462, 38512.649017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23013.336700, 32739.253296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27870.220140, 28324.664200, 383.172811, 383.172811, 0.000000, X, Y) && !ellipse(16594.533890, 27453.533356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.735947, 33041.061096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32502.217590, 37718.633301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31108.225180, 26696.116200, 434.440813, 434.440813, 0.000000, X, Y) && !ellipse(23731.239600, 34371.724400, 768.573622, 416.817612, 170.012000, X, Y) && !ellipse(28148.994385, 31177.875702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16508.639709, 38943.873566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25583.314789, 32916.917236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17257.942078, 35088.760406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18038.941513, 33776.852020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27621.012060, 28947.116000, 277.963208, 277.963208, 0.000000, X, Y) && !ellipse(19801.641320, 29972.924600, 313.976009, 313.976009, 0.000000, X, Y) && !ellipse(32273.016876, 34673.099640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21688.599213, 26313.862030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17133.738480, 28755.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22269.381561, 30515.968933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24011.503200, 26997.452540, 398.665611, 398.665611, 0.000000, X, Y) && !ellipse(29648.539001, 32945.527832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24832.751282, 25353.752991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35280.474762, 26297.870789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.425934, 28693.939148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23753.147339, 25447.929535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31956.237366, 38808.262634, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 04:26:30 2012] Writing fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1.gif
[Fri Aug 10 04:26:42 2012] Mean detx,y = (-35.72, -6424.41) 
[Fri Aug 10 04:26:44 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 04:29:20 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 04:29:20 2012] Setting source spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 04:29:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug 10 05:14:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 05:14:15 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:30 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:30 2012] Error reading totcts from fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug 10 06:28:34 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:34 2012] Using photon index=1.80, rate=0.159, arf fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1.arf
[Fri Aug 10 06:28:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:34 2012] Updating source flux to 2.1e-12
[Fri Aug 10 06:30:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 10 06:33:34 2012] xmm0672130101/analysis//spectral/fullrun_mos2_xmm0672130101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete