[Thu Aug  9 11:12:49 2012] Detection parameters:
  Position = (200.1, 238.7) = 0 43 12.27 40 48 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2009.0 +/- 54.7
  Background counts = 49.4
  Rate = 0.03 +/- 0.0008

[Thu Aug  9 11:12:51 2012] Off-axis axis estimate = 8.34'
[Thu Aug  9 15:15:19 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 15:15:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 15:15:19 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Aug  9 15:15:19 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Thu Aug  9 15:15:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.60"
[Thu Aug  9 16:46:01 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Aug  9 16:46:01 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Aug  9 16:46:01 2012] Fit fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu Aug  9 16:46:02 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Aug  9 16:46:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug  9 16:46:02 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Aug  9 16:46:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Aug  9 16:46:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672130101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 19:14:08 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.321407 pixels away
[Thu Aug  9 19:14:08 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 19:14:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 19:14:08 2012] Assessing source extent using major
[Thu Aug  9 19:14:08 2012] Source does appear to be extended
[Thu Aug  9 19:14:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 21:07:33 2012] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 21:07:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 21:07:33 2012] Initial guess for spatial extent in simple fitting = 10.60"
[Thu Aug  9 21:07:33 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Thu Aug  9 21:07:33 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.60"
[Thu Aug  9 22:20:14 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug  9 22:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3.csv
[Thu Aug  9 22:20:14 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug  9 22:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3.csv
[Thu Aug  9 22:20:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 22:20:14 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug  9 22:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug  9 22:20:14 2012] fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug  9 22:20:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug  9 22:20:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0672130101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 00:17:55 2012] Warning, spatial fit 3 centroid is now closest to src. 8
[Fri Aug 10 00:17:55 2012] Source 3 is offset by -2.424442 and -5.767316 pixels which is larger than
2 X fitted extent = 1.185448 x 1.185448, not incorporating fit results
[Fri Aug 10 00:17:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 00:17:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 00:17:55 2012] Assessing source extent using major
[Fri Aug 10 00:17:55 2012] Source does appear to be extended
[Fri Aug 10 00:17:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 03:20:00 2012] Counts = 2009.046997, rescaling region sizes by 2.000000
[Fri Aug 10 03:20:00 2012] XMMSAS src. selection expression = ellipse(17359.503586, 20719.813538, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Aug 10 03:20:00 2012] Writing source region out to fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3_src.reg
[Fri Aug 10 03:20:00 2012] Extracting stamp from image fullrun_mos1_xmm0672130101_pi300-10000_cl_sm2.00.img.gz, (125, 164) - (275, 314)
[Fri Aug 10 03:20:00 2012] XMMSAS bgd. selection expression = annulus(17359.503586, 20719.813538, 4350.000000, 8700.000000, X, Y) && !ellipse(24192.127600, 24615.041000, 446.254413, 422.963212, 0.586462, X, Y) && !ellipse(25896.065900, 20755.200200, 387.318411, 387.318411, 0.000000, X, Y) && !ellipse(18442.496674, 20340.290375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15747.777344, 20905.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10868.968400, 28094.602400, 412.296012, 412.296012, 0.000000, X, Y) && !ellipse(24778.355042, 14385.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19707.229600, 16088.478000, 321.012809, 321.012809, 0.000000, X, Y) && !ellipse(24314.285126, 17540.723938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(8578.315750, 22364.230712, 712.986824, 315.945601, 77.754464, X, Y) && !ellipse(19112.669876, 16209.326309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11968.849400, 26718.788000, 334.801610, 334.801610, 0.000000, X, Y) && !ellipse(22936.037060, 17437.475800, 503.440014, 503.440014, 0.000000, X, Y) && !ellipse(19560.014435, 16454.816956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.831451, 18967.269852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24016.745000, 26995.107000, 305.392809, 305.392809, 0.000000, X, Y) && !ellipse(14900.141983, 14068.832397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22487.465380, 19769.770400, 325.153609, 325.153609, 0.000000, X, Y) && !ellipse(16633.267000, 27460.861200, 361.080810, 361.080810, 0.000000, X, Y) && !ellipse(21449.701580, 20342.350200, 297.857609, 297.857609, 0.000000, X, Y) && !ellipse(16500.526000, 28910.102940, 1640.016047, 1640.016047, 0.000000, X, Y) && !ellipse(20753.608078, 23603.257660, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 10 03:20:00 2012] Writing fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3.gif
[Fri Aug 10 03:23:00 2012] Mean detx,y = (5865.78, 5262.10) 
[Fri Aug 10 03:23:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 10 03:25:03 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 10 03:25:03 2012] Setting source spectrum file to fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 10 03:25:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Aug 10 03:47:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug 10 03:47:44 2012] rmf not generated due to insufficient counts
[Fri Aug 10 06:28:27 2012] Updating aperture counts using extracted products
[Fri Aug 10 06:28:27 2012] Error reading totcts from fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Aug 10 06:28:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 10 06:28:29 2012] Using photon index=1.80, rate=0.0279, arf fullrun_mos1_xmm0672130101_pi300-10000_pass1_cl_src3.arf
[Fri Aug 10 06:28:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 10 06:28:29 2012] Updating source flux to 3.3e-13
[Fri Aug 10 06:28:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting