[Mon Jun  3 09:05:41 2013] Detection parameters:
  Position = (259.4, 238.6) = 11 37 40.37 -69 46 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1083.6 +/- 43.9
  Background counts = 296.5
  Rate = 0.03 +/- 0.001

[Mon Jun  3 09:05:43 2013] Off-axis axis estimate = 5.18'
[Mon Jun  3 09:13:25 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 09:13:25 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Jun  3 09:13:25 2013] source mask rpix=2.1, npix_max = 26, mask sum = 17, frac = 0.642
[Mon Jun  3 09:13:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.02"
[Mon Jun  3 10:50:05 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun  3 10:50:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4.csv
[Mon Jun  3 10:50:05 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun  3 10:50:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4.csv
[Mon Jun  3 10:50:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 10:50:05 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun  3 10:50:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun  3 10:50:05 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun  3 10:50:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun  3 10:50:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672080101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 11:09:13 2013] Spatial fit model total counts = 1569.850000, observed total counts = 1322.000000
[Mon Jun  3 11:09:13 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 11:09:13 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 11:09:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 11:09:13 2013] Assessing source extent using major
[Mon Jun  3 11:09:13 2013] Source does appear to be extended
[Mon Jun  3 11:09:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 11:09:28 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun  3 11:09:28 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Jun  3 11:09:28 2013] source mask rpix=2.1, npix_max = 26, mask sum = 17, frac = 0.642
[Mon Jun  3 11:09:28 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.02"
[Mon Jun  3 13:01:40 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun  3 13:01:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4.csv
[Mon Jun  3 13:01:40 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun  3 13:01:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4.csv
[Mon Jun  3 13:01:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:01:41 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun  3 13:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun  3 13:01:41 2013] fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun  3 13:01:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun  3 13:01:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672080101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun  3 13:18:28 2013] Spatial fit model total counts = 1570.390000, observed total counts = 1322.000000
[Mon Jun  3 13:18:28 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun  3 13:18:28 2013] Vigneting correction estimate = 1.000000
[Mon Jun  3 13:18:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  3 13:18:28 2013] Assessing source extent using major
[Mon Jun  3 13:18:28 2013] Source does appear to be extended
[Mon Jun  3 13:18:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  3 13:18:43 2013] Counts = 1083.562500, rescaling region sizes by 2.000000
[Mon Jun  3 13:18:43 2013] XMMSAS src. selection expression = ellipse(22518.633057, 20706.810532, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun  3 13:18:43 2013] Writing source region out to fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_src.reg
[Mon Jun  3 13:18:43 2013] Extracting stamp from image fullrun_pn_xmm0672080101_pi300-10000_cl_sm2.00.img.gz, (184, 164) - (334, 314)
[Mon Jun  3 13:18:43 2013] XMMSAS bgd. selection expression = annulus(22518.633057, 20706.810532, 4350.000000, 8700.000000, X, Y) && !ellipse(25176.190700, 27740.423600, 1411.845641, 1379.635240, 329.288400, X, Y) && !ellipse(24337.969800, 17139.510600, 518.486415, 357.583210, 4.058170, X, Y) && !ellipse(29797.543460, 27872.367600, 487.900814, 383.044811, 294.335000, X, Y) && !ellipse(28794.952393, 28517.674408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.424744, 28203.916321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.370000, 27101.920000, 1120.808032, 815.016023, 207.075000, X, Y) && !ellipse(27861.670800, 26271.118400, 1159.728033, 510.058415, 209.934000, X, Y) && !ellipse(26109.140000, 26123.478000, 1074.048031, 1074.048031, 0.000000, X, Y) && !ellipse(17163.215942, 26397.803436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25226.144318, 26767.035706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.724000, 25949.386000, 1225.688035, 654.824019, 38.500100, X, Y) && !ellipse(29797.228800, 25135.686800, 1692.448049, 407.240812, 214.506000, X, Y) && !ellipse(30994.099020, 24464.719000, 1789.088051, 431.449612, 207.271000, X, Y) && !ellipse(31907.639260, 23985.167000, 1909.216055, 443.234413, 28.817400, X, Y) && !ellipse(31125.266296, 21084.070282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23795.224243, 20268.442627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.230530, 19045.871994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.656311, 17964.937881, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun  3 13:18:43 2013] Writing fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4.gif
[Mon Jun  3 13:26:47 2013] Mean detx,y = (-7253.80, 1070.48) 
[Mon Jun  3 13:26:59 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 13:30:04 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 13:30:05 2013] Setting source spectrum file to fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jun  3 13:30:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Mon Jun  3 14:19:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun  3 14:19:42 2013] rmf not generated due to insufficient counts
[Mon Jun  3 15:52:55 2013] Updating aperture counts using extracted products
[Mon Jun  3 15:52:55 2013] Total counts from fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 2885.00
[Mon Jun  3 15:52:55 2013] Total counts from fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 59551.00
[Mon Jun  3 15:52:55 2013] Got source and background scale factors 4894434.000000, 139529945.000000
[Mon Jun  3 15:52:55 2013] User source parameters:
  Position = (259.4, 238.6) = 11 37 40.37 -69 46 22.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 796.1 +/- 54.7
  Background aperture counts = 2088.9
  Rate = 0.03 +/- 0.002

[Mon Jun  3 15:52:55 2013] Updating counts from extracted products
[Mon Jun  3 15:52:55 2013] Set source signif. to 796.07/45.70 = 17.42
[Mon Jun  3 15:53:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun  3 15:53:08 2013] Using photon index=1.80, rate=0.0257, arf fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4.arf
[Mon Jun  3 15:53:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun  3 15:53:08 2013] Updating source flux to 1.4e-13
[Mon Jun  3 15:53:25 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun  3 15:53:55 2013] xmm0672080101/analysis//spectral/fullrun_pn_xmm0672080101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete