[Sun Jun 16 01:13:52 2013] Detection parameters:
  Position = (307.8, 265.3) = 11 38 11.73 -63 22 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.3 +/- 13.7
  Background counts = 60.3
  Rate = 0.002 +/- 0.0005

[Sun Jun 16 01:13:54 2013] Off-axis axis estimate = 2.49'
[Sun Jun 16 01:20:10 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 01:20:10 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jun 16 01:20:10 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Sun Jun 16 01:20:10 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 7.68"
[Sun Jun 16 06:46:27 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82.ximg exists
[Sun Jun 16 06:46:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82.csv
[Sun Jun 16 06:46:27 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82_1.ximg exists
[Sun Jun 16 06:46:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82.csv
[Sun Jun 16 06:46:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 06:46:30 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sun Jun 16 06:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sun Jun 16 06:46:30 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sun Jun 16 06:46:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82.csv
[Sun Jun 16 06:46:30 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672060101_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 15:07:25 2013] Source 86 is offset by 7.012011 and -2.907702 pixels which is larger than
2 X fitted extent = 0.903251 x 0.903251, not incorporating fit results
[Sun Jun 16 15:07:26 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 11.965917 pixels away
[Sun Jun 16 15:07:26 2013] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 10.332257 pixels away
[Sun Jun 16 15:07:26 2013] Vigneting correction estimate = 1.000000
[Sun Jun 16 15:07:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 16 15:07:26 2013] Assessing source extent using major
[Sun Jun 16 15:07:26 2013] Source does appear to be extended
[Sun Jun 16 15:07:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 15:07:26 2013] Source is confused with source 7
[Sun Jun 16 15:08:22 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 15:08:22 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Jun 16 15:08:22 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.926
[Sun Jun 16 15:08:22 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 7.68"
[Sun Jun 16 18:48:47 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79.ximg exists
[Sun Jun 16 18:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79.csv
[Sun Jun 16 18:48:47 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79_1.ximg exists
[Sun Jun 16 18:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79.csv
[Sun Jun 16 18:48:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 16 18:48:49 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sun Jun 16 18:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Sun Jun 16 18:48:49 2013] fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sun Jun 16 18:48:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79.csv
[Sun Jun 16 18:48:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0672060101_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:22:06 2013] Source 86 is offset by 7.012011 and -2.907702 pixels which is larger than
2 X fitted extent = 0.903251 x 0.903251, not incorporating fit results
[Mon Jun 17 00:22:07 2013] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 86 at 10.332257 pixels away
[Mon Jun 17 00:22:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:22:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:22:07 2013] Assessing source extent using major
[Mon Jun 17 00:22:07 2013] Source does appear to be extended
[Mon Jun 17 00:22:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:23:04 2013] XMMSAS src. selection expression = ellipse(26728.882935, 23034.191956, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 00:23:04 2013] Writing source region out to fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_src.reg
[Mon Jun 17 00:23:04 2013] Extracting stamp from image fullrun_pn_xmm0672060101_pi300-10000_cl_sm2.00.img.gz, (270, 228) - (345, 303)
[Mon Jun 17 00:23:04 2013] XMMSAS bgd. selection expression = annulus(26728.882935, 23034.191956, 1087.500000, 2175.000000, X, Y) && !ellipse(25609.865840, 23864.375800, 468.934413, 468.934413, 0.000000, X, Y) && !ellipse(26712.774872, 22578.148193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25716.391000, 26149.508000, 1047.656030, 1047.656030, 0.000000, X, Y) && !ellipse(28813.272095, 25612.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25909.259460, 25629.297241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.761444, 24991.742401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.790802, 24652.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29304.011780, 24285.448853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.129000, 24162.488800, 452.462413, 269.868008, 32.011500, X, Y) && !ellipse(26758.343780, 24180.824000, 1131.352033, 311.267209, 94.646520, X, Y) && !ellipse(27701.377686, 23409.570618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24159.084600, 23234.563800, 1674.624048, 469.788814, 314.218000, X, Y) && !ellipse(25819.686737, 22686.255676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.063200, 22108.627800, 878.816025, 435.840813, 11.200700, X, Y) && !ellipse(25490.776398, 21868.956680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29180.948517, 20969.884109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27799.614040, 21088.622400, 347.120810, 347.120810, 0.000000, X, Y)
[Mon Jun 17 00:23:04 2013] Writing fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86.gif
[Mon Jun 17 01:52:51 2013] Mean detx,y = (-449.42, -1688.72) 
[Mon Jun 17 01:52:59 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 01:53:44 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 01:53:45 2013] Setting source spectrum file to fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Mon Jun 17 01:53:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Mon Jun 17 04:07:25 2013] Not generating rmf since there are only 61 counts
[Mon Jun 17 04:07:25 2013] rmf not generated due to insufficient counts
[Mon Jun 17 07:53:11 2013] Updating aperture counts using extracted products
[Mon Jun 17 07:53:11 2013] Total counts from fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 1205.00
[Mon Jun 17 07:53:11 2013] Total counts from fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_bgd.pi.gz = 1982.00
[Mon Jun 17 07:53:11 2013] Got source and background scale factors 1096974.000000, 2435470.000000
[Mon Jun 17 07:53:11 2013] User source parameters:
  Position = (307.8, 265.3) = 11 38 11.73 -63 22 56.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 312.3 +/- 35.7
  Background aperture counts = 892.7
  Rate = 0.008 +/- 0.0009

[Mon Jun 17 07:53:11 2013] Updating counts from extracted products
[Mon Jun 17 07:53:11 2013] Set source signif. to 312.28/29.88 = 10.45
[Mon Jun 17 07:53:36 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 07:53:36 2013] Using photon index=1.80, rate=0.00781, arf fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86.arf
[Mon Jun 17 07:53:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 07:53:36 2013] Updating source flux to 7.3e-14
[Mon Jun 17 07:55:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 07:55:27 2013] xmm0672060101/analysis//spectral/fullrun_pn_xmm0672060101_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete