[Wed May 22 02:19:25 2013] Detection parameters:
  Position = (131.5, 380.5) = 4 21 16.10 56 4 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.5 +/- 17.6
  Background counts = 79.2
  Rate = 0.001 +/- 0.0003

[Wed May 22 02:19:26 2013] Off-axis axis estimate = 13.49'
[Wed May 22 03:30:14 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Wed May 22 03:30:14 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Wed May 22 03:30:14 2013] source mask rpix=3.0, npix_max = 49, mask sum = 33, frac = 0.663
[Wed May 22 03:30:14 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.17"
[Wed May 22 05:21:03 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 22 05:21:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20.csv
[Wed May 22 05:21:03 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 22 05:21:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20.csv
[Wed May 22 05:21:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 05:21:03 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 22 05:21:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 22 05:21:03 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 22 05:21:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 22 05:21:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672050101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 05:21:20 2013] Source 3 is offset by -2.727401 and 0.353600 pixels which is larger than
2 X fitted extent = 1.513968 x 3.596727, not incorporating fit results
[Wed May 22 05:21:20 2013] Vigneting correction estimate = 1.000000
[Wed May 22 05:21:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 05:21:20 2013] Assessing source extent using major
[Wed May 22 05:21:20 2013] Source does appear to be extended
[Wed May 22 05:21:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 06:33:45 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Wed May 22 06:33:45 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Wed May 22 06:33:45 2013] source mask rpix=3.0, npix_max = 49, mask sum = 33, frac = 0.663
[Wed May 22 06:33:45 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 13.17"
[Wed May 22 08:05:16 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18.ximg exists
[Wed May 22 08:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18.csv
[Wed May 22 08:05:16 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed May 22 08:05:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18.csv
[Wed May 22 08:05:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 08:05:17 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed May 22 08:05:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed May 22 08:05:17 2013] fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed May 22 08:05:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed May 22 08:05:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0672050101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 08:05:33 2013] Source 3 is offset by -2.727401 and 0.353600 pixels which is larger than
2 X fitted extent = 1.513968 x 3.596727, not incorporating fit results
[Wed May 22 08:05:33 2013] Vigneting correction estimate = 1.000000
[Wed May 22 08:05:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 08:05:33 2013] Assessing source extent using major
[Wed May 22 08:05:33 2013] Source does appear to be extended
[Wed May 22 08:05:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 08:52:40 2013] XMMSAS src. selection expression = ellipse(11392.730133, 33055.618622, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 08:52:40 2013] Writing source region out to fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_src.reg
[Wed May 22 08:52:40 2013] Extracting stamp from image fullrun_mos2_xmm0672050101_pi300-10000_cl_sm2.00.img.gz, (94, 343) - (169, 418)
[Wed May 22 08:52:40 2013] XMMSAS bgd. selection expression = annulus(11392.730133, 33055.618622, 1087.500000, 2175.000000, X, Y) && !ellipse(11751.692749, 33908.905212, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 08:52:40 2013] Writing fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3.gif
[Wed May 22 09:02:05 2013] Mean detx,y = (15884.39, 4779.21) 
[Wed May 22 09:02:08 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 09:02:36 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 09:02:36 2013] Setting source spectrum file to fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 22 09:02:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 22 09:15:51 2013] Not generating rmf since there are only 90 counts
[Wed May 22 09:15:51 2013] rmf not generated due to insufficient counts
[Wed May 22 09:23:35 2013] Updating aperture counts using extracted products
[Wed May 22 09:23:35 2013] Total counts from fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 92.00
[Wed May 22 09:23:35 2013] Total counts from fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 481.00
[Wed May 22 09:23:35 2013] Got source and background scale factors 727532.000000, 4375364.000000
[Wed May 22 09:23:35 2013] User source parameters:
  Position = (131.5, 380.5) = 4 21 16.10 56 4 30.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 12.0 +/- 10.6
  Background aperture counts = 80.0
  Rate = 0.0003 +/- 0.0003

[Wed May 22 09:23:35 2013] Updating counts from extracted products
[Wed May 22 09:23:35 2013] Set source signif. to 12.02/8.94 = 1.34
[Wed May 22 09:23:38 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 09:23:38 2013] Using photon index=1.80, rate=0.000314, arf fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3.arf
[Wed May 22 09:23:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 09:23:38 2013] Updating source flux to 1.9e-14
[Wed May 22 09:23:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 09:23:49 2013] xmm0672050101/analysis//spectral/fullrun_mos2_xmm0672050101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete