[Sun Jun 23 06:18:18 2013] Detection parameters:
  Position = (260.3, 261.4) = 4 56 9.69 30 29 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.8 +/- 23.6
  Background counts = 161.0
  Rate = 0.004 +/- 0.0004

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 3.86'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 8.36"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun Jun 23 08:27:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Jun 23 08:27:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun Jun 23 08:27:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun Jun 23 08:27:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Source 54 is offset by 7.995486 and 5.939528 pixels which is larger than
2 X fitted extent = 0.960524 x 2.623793, not incorporating fit results
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 8.36"
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sun Jun 23 14:01:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Source 54 is offset by 7.995486 and 5.463091 pixels which is larger than
2 X fitted extent = 0.960524 x 1.248736, not incorporating fit results
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:14 2013] XMMSAS src. selection expression = ellipse(22598.581299, 22689.170898, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_src.reg
[Sun Jun 23 17:21:14 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (223, 224) - (298, 299)
[Sun Jun 23 17:21:14 2013] XMMSAS bgd. selection expression = annulus(22598.581299, 22689.170898, 1087.500000, 2175.000000, X, Y) && !ellipse(24704.436371, 24526.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.051666, 22557.006195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.077759, 23523.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.287788, 20829.931000, 478.780014, 356.608810, 23.046359, X, Y) && !ellipse(25085.111816, 25366.868835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22474.671082, 25012.024170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.034400, 23922.284800, 1316.688038, 373.419211, 65.049000, X, Y) && !ellipse(24956.730530, 23881.733063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22210.840820, 23689.936401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19888.441559, 23475.752533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.294708, 23018.697205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.694702, 22152.454071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.241913, 21273.239792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.183533, 20621.755341, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54.gif
[Sun Jun 23 18:25:20 2013] Mean detx,y = (-4250.96, 4884.10) 
[Sun Jun 23 18:25:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:25:40 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:25:40 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sun Jun 23 18:25:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sun Jun 23 19:36:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 19:36:49 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:18 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:18 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 771.00
[Sun Jun 23 22:10:19 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 2867.00
[Sun Jun 23 22:10:19 2013] Got source and background scale factors 1073754.000000, 5245516.000000
[Sun Jun 23 22:10:19 2013] User source parameters:
  Position = (260.3, 261.4) = 4 56 9.69 30 29 26.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 184.1 +/- 28.8
  Background aperture counts = 586.9
  Rate = 0.002 +/- 0.0003

[Sun Jun 23 22:10:19 2013] Updating counts from extracted products
[Sun Jun 23 22:10:19 2013] Set source signif. to 184.13/24.23 = 7.60
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=0.00205, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 1.2e-14
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete