[Sun Jun 23 06:18:18 2013] Detection parameters:
  Position = (288.5, 265.1) = 4 56 0.20 30 29 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.1 +/- 22.1
  Background counts = 164.6
  Rate = 0.002 +/- 0.0003

[Sun Jun 23 06:18:19 2013] Off-axis axis estimate = 2.52'
[Sun Jun 23 06:25:18 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:25:18 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Jun 23 06:25:18 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.973
[Sun Jun 23 06:25:18 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 7.69"
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52.csv
[Sun Jun 23 08:27:21 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun Jun 23 08:27:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52.csv
[Sun Jun 23 08:27:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:27:22 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun Jun 23 08:27:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sun Jun 23 08:27:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun Jun 23 08:27:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Sun Jun 23 08:27:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 12:04:05 2013] Warning, spatial fit 52 centroid is now closest to src. 13
[Sun Jun 23 12:04:05 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 12:04:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 12:04:05 2013] Assessing source extent using major
[Sun Jun 23 12:04:05 2013] Source does appear to be extended
[Sun Jun 23 12:04:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 12:04:36 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 12:04:36 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Jun 23 12:04:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.973
[Sun Jun 23 12:04:36 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 7.69"
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51.csv
[Sun Jun 23 14:01:23 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Jun 23 14:01:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51.csv
[Sun Jun 23 14:01:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun Jun 23 14:01:24 2013] fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Jun 23 14:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun Jun 23 14:01:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0671960101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 17:20:43 2013] Source 53 is offset by 2.152330 and -3.210860 pixels which is larger than
2 X fitted extent = 0.918883 x 0.918883, not incorporating fit results
[Sun Jun 23 17:20:43 2013] Warning, spatial fit 51 centroid is now closest to src. 49
[Sun Jun 23 17:20:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 17:20:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 17:20:43 2013] Assessing source extent using major
[Sun Jun 23 17:20:43 2013] Source does appear to be extended
[Sun Jun 23 17:20:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 17:21:14 2013] XMMSAS src. selection expression = ellipse(25051.294708, 23018.697205, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing source region out to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_src.reg
[Sun Jun 23 17:21:14 2013] Extracting stamp from image fullrun_pn_xmm0671960101_pi300-10000_cl_sm2.00.img.gz, (251, 228) - (326, 303)
[Sun Jun 23 17:21:14 2013] XMMSAS bgd. selection expression = annulus(25051.294708, 23018.697205, 1087.500000, 2175.000000, X, Y) && !ellipse(24704.436371, 24526.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26628.684784, 22308.044098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24230.051666, 22557.006195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.077759, 23523.312073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25058.471252, 26062.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25085.111816, 25366.868835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22474.671082, 25012.024170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26006.094400, 24450.808200, 477.105614, 278.604808, 346.645500, X, Y) && !ellipse(22108.034400, 23922.284800, 1316.688038, 373.419211, 65.049000, X, Y) && !ellipse(24956.730530, 23881.733063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22210.840820, 23689.936401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26410.388140, 23510.261840, 325.577609, 325.577609, 0.000000, X, Y) && !ellipse(22598.581299, 22689.170898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.694702, 22152.454071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24911.241913, 21273.239792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24723.183533, 20621.755341, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 17:21:14 2013] Writing fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53.gif
[Sun Jun 23 18:24:17 2013] Mean detx,y = (-1674.99, 4408.49) 
[Sun Jun 23 18:24:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 18:24:44 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 18:24:44 2013] Setting source spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Sun Jun 23 18:24:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Sun Jun 23 19:36:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 19:36:24 2013] rmf not generated due to insufficient counts
[Sun Jun 23 22:10:18 2013] Updating aperture counts using extracted products
[Sun Jun 23 22:10:18 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 882.00
[Sun Jun 23 22:10:18 2013] Total counts from fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_bgd.pi.gz = 1354.00
[Sun Jun 23 22:10:18 2013] Got source and background scale factors 1077168.000000, 2240000.000000
[Sun Jun 23 22:10:18 2013] User source parameters:
  Position = (288.5, 265.1) = 4 56 0.20 30 29 46.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 230.9 +/- 30.7
  Background aperture counts = 651.1
  Rate = 0.003 +/- 0.0003

[Sun Jun 23 22:10:18 2013] Updating counts from extracted products
[Sun Jun 23 22:10:18 2013] Set source signif. to 230.89/25.52 = 9.05
[Sun Jun 23 22:10:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 22:10:22 2013] Using photon index=1.80, rate=0.00257, arf fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53.arf
[Sun Jun 23 22:10:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 22:10:22 2013] Updating source flux to 1.3e-14
[Sun Jun 23 22:10:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 22:11:06 2013] xmm0671960101/analysis//spectral/fullrun_pn_xmm0671960101_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete